Having problems with your Canon EOS 400D / Rebel XTi Digital Camera ?

My Canon XTI does not let me change aperture any more. No matter where I dial to, it stops at the lowest aperture (highest F stop) and would not change any more. Does any one know what could go wrong? I changed quite a few lenses and the result is the same.

Answers :

Remove ur lens see inside camera small points r there just clean with cotton cloth if not then sent to ur by courier for service
Repair Help & Product Troubleshooting for Canon EOS 400D / Rebel XTi Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Canon XTI does not let me change aperture any more. No matter where I dial to, it stops at the lowest aperture (highest F stop) and would not change any more. Does any one know what could go wrong? I changed quite a few lenses and the result is the same.

Remove ur lens see inside camera small points r there just clean with cotton cloth if not then sent to ur by courier for service ... Canon EOS 400D / Rebel XTi Digital Camera

I have changed the settings somehow on my camera and don't know how to get it back to it's original setting, the quality of my photo's seem quite ***** like and very bright.. anyone know how to change it back?

Hi,\015\012\015\012Press the MENU button to bring up the Record mode Menu. You can use this shortcut menu to quickly change image resolution, reset all settings to factor defaults, enter Panorama mode, enable Picture+Sounds, enable Silent ... Olympus FE-230 Digital Camera

I have copied and pasted someone elses problem, because it is the same one I am having. So if I want to use the aperture for taking Manual photos I cannot do this because when it goes off of F22, it reads FEE, error. "I have nikon d80 with the fEE error code blinking... I know this means that the aperture is not locked at the 22 but it will not allow me to change the aperture settings. Please help us!!!"

Lock the aperture ring at its smallest opening (in this case, F22). Change the aperture setting by turning the subcommand dial (the one in front, unless you changed it in the setup menu).Of course, you can only change the aperture directl ... Nikon D80 Digital Camera with 28-80mm Lens

If I'm in TV and switch to AV nothing changes - which means no manual aperture changing. This has been happening ever since I got it - it's was 2nd hand so don't know what happened in the previous hal

... Canon Rebel Digital Cameras

My manual program does not work; it's as if the program was stuck on "user". I cannot change the aperture, the speed goes up only to 250 and the exposure bar is not visible. I don't know what happened, since I did not change my settings since last use.I use Pentax K10D.

... Pentax K10D Digital Camera

Wrong Language My camera, ( Fujifilm E550 ), was somehow put into the language of Spanish. Im not sure how to change it back now, because of it being in Spanish. So I need to know what to do in order to change it back.

2 possible solutions for you. Take the batteries out. Press the power button (with batteries out). Nothing will happen. It's OK. Leave batteries out for 4-6 hours. Re-install batteries. Camera should default to initial set-up screen, where it will as ... Fuji FinePix E550 Digital Camera

My camera turns on but will not take pictures i have changed the batteries and everything dont know what is wrong

Sounds like an internal sensor is acting up. Teleplan Camera Repair can do this repair and they are very good with these cameras. Repairs done by K ... Kodak EasyShare C513 Digital Camera

Hi can you please tell me something in relation to my camera. I have a Panasonic DMC LX2 digital camera and I would like to know how to set the date to be used whilst I'm taking photo's, so when I go to print my photo's the date is on them? Thankyou Kane correcting date, time and etc I entered it wrong and need to change it.

The clock-setting instructions are on page 20 of the manual.The date and time (and a lot more) are stored with every picture in its EXIF ... Kodak Easyshare M753 Digital Camera

I have an hp 935 photosmart digital camera for some odd reason it won't turn on.I have changed the batteries and i don't know what could be wrong

I just bought my 935 photosmart camera and discovered that the saftware is not included, what do I do ... HP Photosmart 935 Digital Camera

I have a Canon T1i Rebel. My aperture is frozen in manual mode. Works fine in AV mode. I have checked it out on 3 lenses. The camera knows I have changed the lens, I have taken the battery out all night, I have reset the camera back to default settings too...

Not knowing your experience level, I want to make sure that you are (in the Manual mode) attempting to change the aperture by holding the aperture button with your thumb while rotating the main dial to increase or decrease the aperture value. If you ... Canon EOS 500D / Digital Rebel T1i Digital Camera

D60: I just got back from Certified Repair group where they said the camera is "okay". The Problem: It's like the ISO has shifted, and the readings on P, S, A, even M all result in a long exposure/wide open aperture reading. Frequently the reading is such that the shutter will not release, due to no focus or wrong light amount. Frequently the focus "peep" does not go off, and so the shutter will not release. Two weeks ago it was fine, don't think I changed anything, but it's like a setting is

Have you tried going into the menu and finding "reset"? ... Digital Cameras

Broken? I got My DXG-305V a few weeks ago, and it acting wierd. I plugged it into my computer to get a few pictures off, then I safely removed it, and tried to turn it on, but it wouldn't. The little power light will turn green for a second and then turn red. I have changed the batteries, tried removing the memory card, and tried plugging it back into the computer, but nothing will work. Does anyone know what is wrong?

Have a look in the battery compartment to see if the connections for the battery is not connecting with one of the batteries, i had a camera that stop that stop working on batteries but ok with the mains. ... DXG Technology DXG-305V Digital Camera

My Sony Alpha 200 digital camera takes lovely pictures, but as I am a beginner and don't really know much about apertures and shutter speeds and how complex they are, I'm having great difficulty in getting it to focus properly in the manual setting. All other settings are fine, but the image in my viewfinder is very blurry when I look through before taking the shot. I have altered the diopter for my eyes as I wear glasses, so that isn't the problem. Is there something I'm either doing wrong, or

Having gone over a month without a response, I assume this is no longer a problem. ... Sony Alpha DSLR-A200 Digital Camera

Autofocus my nikon d5000 will not autofocus. i've tried changing the modes from AF-A to the other modes. it will autofocus in LiveView mode. i don't know whats wrong with it.

Reset.Press and Hold the INFO button near the trigger and 'I' button at left side bottom for few seconds. Once the information appears on the LCD screen, your autofocus should be working.Orelse, carry it to an authorised servi ... Nikon D5000 Digital Camera

Camera Failure I was taking pictures of my daughter on the beach last week and my camera just quit. The lens is still out. This has happened before when the battery died, but I charged the battery and it still won't work. I am pretty positive that I have an extended warranty on the camera (though it is only a few months old) but I can't find my paper work. What do I need to do? Do you think you know what is wrong with it? Amy

Hi amy just try gently pulling and twisting the end of the lense be gentle and dont pull and twist till it pops switch it off then back on and you should be fine ... Sony Cyber-shot DSC-W80 Digital Camera

I changed the default settings and I do not know how to get them back. I used to get beautiful pictures and now they come out all wrong

Go into the menu and scroll to "reset"...follow the on-screen instructions. ... Samsung Digimax S600 Digital Camera

I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck

Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera

Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A

Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera

When i turn on my Sanyo 5x vpc-51415, the screen displays a red "x" with some kind of icon that looks like a battery & then shuts off. I tried changing batteries, sim cards, i dont know what's

... Digital Cameras

Aperture cant be changed on manual mode

Maybe a lens problem. Try to re-seat the lens and play with the Aperture test button on the right side of the camera (near your right finger)\015\012NOTE: Please rate our help to keep this free service online ... Nikon D80 Digital Camera with 18-55mm Lens

I own an Olympus Evolt E-500. Unfortunately, it was dropped and landed on the corner of the case near the battery door. The camera turns on, lcd screen, flash, and shutter seem to work, BUT pictures are black. Difficult to view anything thru viewfinder. Camera store told me they didn't know what was wrong, but would cost me at least $270 to repair. 1) does anyone know what is wrong, 2) can I fix it myself?

I found this camera available for purchase as brand new for $450. Spending nearly $300 to repair an older version may no be a wise choice. You may find there is a market for the camera in its current non-working condition on eBay.With that ... Olympus EVOLT E-500 Digital Camera

Sherif Fathy I want to know how to change the language of the camera turned it into Japanese do not know how to change the language to English .. Please respond to this ُE-mail :[email protected] and thank you all and respect

... Fuji FinePix F420 Digital Camera

My date is set wrong and I want to change it. I can change it on or off but cannot figure out how to change the actual date. Please help.

These are extracts from the manual:-"To better understand each menu option, use camera Help-highlight a menu choice, then press the Telephoto (T) button." but here is the menu button:- ... Kodak EasyShare M1033 Digital Camera

My kodak DX7630 has a problem. I think I know what is causing it but I need to know how to take it apart. Do you know how the dial for the different controls is removed ? What is happening is the camera continuously turns on and off. If I apply pressure on one side of the dial, it quits. I am guessing that there is dirt between the dial and the contact board.

Google the words...disassemble a digital camera. ... Kodak EasyShare DX7630 Digital Camera

Hi there. I've just bought a remote shutter/controller JJC JR Series Infrared Controller,for my Panasonic DMC FZ50,but it doesn't work at all. I don't know if I'm doing something wrong or if is the gadget that is faulty. I don't know if the light on top of the receiver should be on,because is always off(no light); I don't know if I have to program something in the camera before connecting the device; I don't understand why even if I do everything as the instructions say,nothing ha

Hi,\015\012\015\012With this camera you need to activate the power save mode or the remote will not operate.\015\012\015\012To activate it do the following\015\012\015\0121) Press menu set and then press the left a ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1436 seconds