Having problems with your Canon EOS 400D / Rebel XTi Digital Camera ?
I'm getting an error msg asking me to switch on and off again
\015 I'm getting an error msg sayign shooting is not possible and to utn power switch to on and off again and to re-install the battery, I think some moisture may have affected the machine, what can I do to solve this? Many thanks in advance Rachel\015
Try using a hairdryer on MEDIUM ( not hot or too close) to dry out anjy moisture open the battery door and remove lens when warming.
Please rate my help++++Thanks for using FIXYA
Please rate my help++++Thanks for using FIXYA
Repair Help & Product Troubleshooting for Canon EOS 400D / Rebel XTi Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I'm getting an error msg asking me to switch on and off again
Try using a hairdryer on MEDIUM ( not hot or too close) to dry out anjy moisture open the battery door and remove lens when warming.Please rate my help++++Thanks for using FIXYA ... Canon EOS 400D / Rebel XTi Digital Camera
Just got an exilim ex-h5 and a sdhc memory card and keep on getting a 'card error' msg when i switch on my camera. ive already tried formatting it via my laptop but still am getting the same msg
... Casio EXILIM EXH5 Digital Camera
Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.
Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera
When I turn on my Nikon D40 with the 18-55 mm lens set to autofocus I get an error message "Error. Turn Camera off and then on again." If I turn the lens switch to manual, I do not get the error. If I attache my 70-300 mm lens, I get the error regardless of the lens focus switch psition. I have just upgraded the firmware with no improvement.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon D40 Digital Camera with G-II 18-55mm Lens
I have got Yashica Ez8032 Digital Camera and it suddenly showing Lense Error 21 & 16. It is not getting switched on and no sooner I switch it on it displays the Lens Error and gets switched off. I can't take any pic from it. What can I do?
... Digital Cameras
Card error When I switch on the power I get a message to either switch off power or format the card. I press OK to format the card and then get a message of card error
If you get a message as "Memory Card Error" on your camera AND you still need some of the photos , the first step is to format the card through the camera menu (Note: if you have an sD card, once you re-format your card any photos cannot be recovere ... Olympus SP-700 Digital Camera
Lens error restart camera but it just switches off i keep getting a lens error restart camers error i turn it off and on but get the same error
This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SX100 IS Digital Camera
Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,
The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera
We have a Sony DSC-P150 7.2 Megapixel camera. When it switches on we get an error message as follows: E:61:00. If we get the option to take a picture then there appears to be no auto focus on the lens alsowhen switching off the camera the lens does not close down into the camera.
... Sony Cyber-Shot DSC-P150 Digital Camera
Good Day. I dropped my Nikon Coolpix L16 camera onto a table. Since then when i switch the device on the lens goes out about a quarter and the goes back in and i get a lens error message. I noticed that when the lens goes out it bends to the right(looking from the top) and gets stuck by something. When i pull the lens a little to the left while switching it on everything works fine. A very small metal part came out of the camera. Any ideas? is it repairable?
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras
Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.
The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON ... Canon PowerShot SD1000 Digital Camera
ZOOM ERROR When I switch my F470 on. I get a white bar across the centre of the viewing screen with ZOOM ERROR. I have switched it off and on again, charged the battery so full of charge, all to no avail any Ideas ?
I used to get that error all the time with a earlier Fuji FinePix with the slide-over lens cover. If the cover wasn't pushed back completely, the lens would extend only so far and then give an error. Make sure that there's nothing (dirt, hair) on any ... Fuji FinePix F470 Digital Camera
Lens error CoolPix L11. I switch on the camera The lens comes out. A picture is shown for about 1 second. Then the message Lens Error is displayed. The lens is retracted. After 15 seconds or so the camera switches itself off. The camera was bought in USA as a gift for a friend in Sri Lanka. Not so easy to get a local repair - if this is at all possible anyway. What is your advice? Thanks James
Try the procedures in this tip. ... Nikon Coolpix 5700 Digital Camera
My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked. i have switched the lock switch on the card, and it doesn't do anything, i have also tried formatting my card.
1 Turn the Canon Powershot A560 over so the bottom is facing up. 2 Locate the door on the bottom of the camera. The door is labeled "CARD/BATT. OPEN." 3 Place your thumb on the sl ... Canon PowerShot SD750 / IXUS 75 Digital Camera
Hi Team hve a problem with Olympus Camedia C-450 Zoom Digital Camera - put in new memory card (original) and since cant get camera to work - I think the said camera is almost new - but I get error message -CARD ERROR - when asked to format? - please help? Paul
You need to format a card in the camera to erase and optimize it for the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. ... Olympus Camedia C-450 Zoom Digital Camera
Error I keep getting, intermitently, an error 99 that asked me to turn off camera and does not allow further picture taking. It also asks to remove and put battery back in. Sometimes this allows me to take more pictures.
I removed the lense and tried to shoot in AF mode. Still encountered the same problem. I returned the camera and exchanged it for another. New camera works fine. This appears to be an intermittent software problem with these cameras. If you enco ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens
I get error 99 with my EOS 1000D as soon as I try to shoot the first picture after switching on following either an auto switch off or switching off using the switch. re-installing the battery cure it until the next switch off.
Shutter unit is faulty you need to replace it\015\012its have come err99 problem which is can be sort out with service firmware 1.0.6 update and then put latest firmware 1.0.6 ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
E:91:01 hello friend I saw your reply for the e:91:01 flash error. I'd like to ask you if those steps are realy working, i dont have the camera with me right now to test it. but i will do it when i get home later in day. I have a DSC-W50 that now blinks that error. Before this error i had 2 others but i fix them. firstly: while i was turning ON the camera ...lens where comming in and out for 3 times, and message was displayed on LCD that i cant remember right now. Solution: .. i disassembled in
I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think t ... Sony Cyber-shot DSC-W50 Digital Camera
Error 16 I just bought a brand new Canon SD400 and a SanDisk Ultra II 1.0 gig Secure Digital memory card. When I use the fast frame rate (60 frames/sec), I often get an "E16" error and then my camera switches off. Can somebody help me out with this? I have searched all over the net for a solution to this, but there isn't much out there regarding this error. Thanks,
Do you have another memory card? can you try the stock canon card and see if it does it with that memory card? \015\012\015\012How do the contacts on the battery pack look? can you clean them? scratch them up a bit with somthing pointed. ... Canon PowerShot SD400 / IXUS 50 Digital Camera
I keep getting the error msg memory card cannont be read
Your camera is only supporting: SD/MMC up to 1 Gigabyte\015\012\015\012The card that you currently have might be high speed. All should be sorted if you change the SD card to the supported MMC SD card up to 1G. There is a lever on the SD ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD
I get a lens error msg restart camera
Give the lens a turn ... Canon PowerShot SX100 IS Digital Camera
Get the error The Card is locked when I switch on
Lock and unlock option is on the card,select unlock option,then try. ... Casio Exilim EX-S880 Digital Camera
Camera turns on BUT then get "lens error restart camera" msg
This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot S3 IS Digital Camera
My daughters olympus FE190 when switched on asks you to Format or Power Off. If you choose Format it switches itself off and if you choose Power Off is then gives you Card Error. Does this mean the Picture Card and she needs to buy a new one??
The largest xD card which can be used in this camera is 2GB. If the card is larger than that then it wont work. This camera has both internal and card memory. Try using the camera without the card or with a smaller card. ... Digital Cameras
I carent get a memory card to work at all. Tried a 2gb and it comes up with ERROR and askes if i wanna format the card, so I formated the card, and it went to picture display screen, took a photo and it came up with ERROR again. I then tried a 4gb card and when I turned on the camera and it just displays vivitar logo permanently. Camera works fine with no memory card in. Vivitar 3750 model thanks for all your help.
These cards is too much for the cam can hold and would cause errors just like u said try 512mb memory card or even less should work good and then clean it up by downloading all on ur pc and re use it i use 128mb even for mine lol,hope that helped ty ... Vivitar ViviCam 3750 Digital Camera