Having problems with your Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens ?

Error99 occurs when i use lenses not supplied with my 400d these lenses however work with my 1000fn

Answers :

The 99 error is usually associated with a faulty pin connection. on the lens to the pin on the camera. Hers a trick that has worked in the past.
Use a pencil with eraser attached, gold the lens mount down while at same time you hold at a height you can run the rubber over the pins on the mount. Do the aame on the camera ensuring you dont get rubber bits inside camera. Finish off with a blast of copmpressed air feom a can and re assemble 99% of the time E99 disappears.

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope \012the advise is useful. please do not hesitate to let me know if you need any further assistance.

Repair Help & Product Troubleshooting for Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Error99 occurs when i use lenses not supplied with my 400d these lenses however work with my 1000fn

The 99 error is usually associated with a faulty pin connection. on the lens to the pin on the camera. Hers a trick that has worked in the past.Use a pencil with eraser attached, gold the lens mount down while at same time you hold at a height ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Hi there i have a auto focus problem. i used mt 50D for the first time on saturday, after about 100 shots Err99 appeared, i turned the camera off and took the battery out an the error message never occured again, however since then the camera will not auto focus correctly with my 17-40 IS lens. the lens has worked perfectly on my 20D for the past couple of years. When going from close focus to distant focus (and distant to close) there is no autofocus whatsoever. the focus points highlight i

The camera is having problems with your lens and this is why it goues into the error mode. Try first cleaning the interface contacts on the lens ( see enclosed pic ) . If this does not sort the problem out then the auto focus motor ( or related hardw ... Canon Digital Cameras

Olympus e10 problem. Even with new batteries, could only take a couple of shots before the low battery icon came up & camera shut down. Would work fine using mains supply. Fixed by buying new battery holder. Now 3 weeks later doesn't work again - low battery then switch off both using batteries or mains power supply. Any ideas appreciated as it's a great camera when working. Thanks

You didn't say what type of batteries you are using. Best are CR-V3 lithium which should give 500 shots. 2300 mAh Ni-MH rechargeable batteries should give 200 shots. Worst are alkalines which Olympus do not recommend. Have you checked the co ... Olympus Digital Cameras

My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just

Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera

I have a Canon EOS 1000D, and I've had it for almost 4 years. Recently i started having problems with both my lenses. Autofocus works but through the everything appears blurry when "focuses" and thus I can't use manual focus anymore. In conclusion, everything appears blurry through the eyepiece but the lenses obviously work as the pictures come out perfectly clear when using autofocus. What is the problem and how do I fix it?

My canon eos rebel xs works properly for the last 2 years but now faces delayed lcd on problem especially in cold weather ... Canon EOS Rebel XS / EOS 1000D Digital Camera with 18-55mm lens

I found a Quantaray 55-52 mm step down ring (Manufacture # 241664614) on Wolf Camera's website that I am interested in purchasing, but want to make sure it would work for me. I have some close up lenses (Hoya) for my old Canon SLR film camera (55mm) and was hoping I could use those lenses on my newer Nikon DSLR (52mm) camera. Would the step down ring make it possible to attach and use my old camera's close up lenses on my new DSLR camera? Thanks, Jerry

No. The 55-52mm step-down ring will let you attach a 52mm attachment onto a lens with a 55mm thread. You want a 52-55mm step-up ring. ... Digital Cameras

Where does the external power supply plug in ? The system uses 6- 1.5 volt batteries , This equals 9 volts ..... Does this mean that the system is 9V ? Can I use a 6volt power supply with a solar panel? Your advertised external power supply is 12V..... How does this work on a 9V camera ? Looking for a way to leave the camera long term with out having to make a 200 mile trip to change batteries every few weeks.

... Moultrie GameSpy 4.0 Digital Camera Deluxe

I have a Panasonic DVC20P camcorder for my school. We used it three times and it stoped recording and playback. I sent it into a service provider which said they cleaned the heads and realined the lenses...Anyway, I tryed to use it after we received the camera back and it still does not work. It is only 4 months old. I want either my money back or a different camera which will work. We lost some import opportunities to campture video for our school because out new camera would not work. I

... Panasonic Digital Cameras

My HP M527 digital camera works well with my Macintosh iBook G4 using Image Capture. However, it does not work with my iMac desktop even though I am using the identical software. With my iMac, I get all indications that the camera is connected but all I get is a continuing mwessage "..waiting for the device." I have tried disconnecting my all in one printer, but get the same results. I'm using Mac OS X v 10.4.11 and Image Capture versio 3.3.3 on both computers. Any suggestions? Than

Locate and copy the driver into the desktop...or locate it somewhere on the net ...it is not enough to use the software that makes the camera available for commands and all ...but it needs the actual driver for to communicate ...it is searching in l ... HP Photosmart M527 Digital Camera

I have an old interchangable lense from a Nikon camera that I used to use with film. My question is does the lense Sigma DL zoom 75-300 mm 1:4-5.6, fit or work on any of the digital camera today?

Yes. It will fit and work on every current Nikon digital camera. It will act longer, like a 125-450mm on the smaller sensor bodies (everything except the D700 and the D3 series). It will act like a 75-300mm on the D700 and the D3. It also won't autof ... Digital Cameras

The auto focus will not work on my EOS 400D lense. ,I dropped the camera. The tele-scope lense works fine. I cleaned the contacts as suggested with swab & alcohol

You can take your camera/lens to a repair shop for a possible repair, however, this sort of repair, if it can be done may be pricey. I am sorry to tell you that cameras have a healthy sized strap and padded cases for a this reason. They are very easy ... Canon PowerShot EOS D30 Digital Camera

Camedia Master I have been using Camedia Master on my computer to edit my photos, for some time now. I like it very much. We have recently bought a new computer however, with Vista already installed. The program has worked fine until recently, but now when I try to use it, I get the message "A problem stopped the program working correctly. Windows will close the program and notify you if a solution is available." That is all that appears to happen, & I hear nothing from Windows! I just cannot us

To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Camedia C-740 Ultra Zoom Digital Camera

Hi I have used my canon camera eos 400d with the 17-85 mm canon lense for nearly 2 years. Since last week i am encouttering the error 99 < replace the battery and try again>.I did this but the problem persist. I replaced the lense with the default lense that comes with the camera.The problem has been solve. So the conclusion is that the 17-85mm lense was faulty. Since it cannot fucus on automatic and is continueously blinking. I SHOULD BE GRATEFUL IF YOU COULD HELP ME TO HAV

The lens most probably has dirty contact between the lens and camera body. It only worked with the "default" lens because you disturbed the dirt removing the 17-85 lens.Here is what I'm suggesting, seeing you said the problem was solved b ... Canon EOS 40D Digital Camera with 17-85mm lens

I have a Sigma 17-70mm F2.8-4.5 Macro lens working on a Nokon D40X and Nikon D300. For medium to long distances the autofocus does not seem to work with this lens. I think it used to but now I notice that from about 40 feet away the autofocus does not work. The same happens with both cameras. Other lenses work fine so I don't think it is the camera. Is there any history of problems or is it a feature of the lens? thanks, Richard Brand

... Sigma Digital Cameras

LENSE i BOUGHT A LENSE optomax 300 mm f5.5, with a sliding hood at the end...I put it on my Pentax ist DL but it seems that it's not working.. DO I have to set up the aperture. the shutter is not functioning everytim I use this lense. Pls. Help Thanks.

Make sure the aperture ring is set to the "A" position. If the lens doesn't have an auto aperture setting then I don't think the lens will work. \015\012\015\012There is a setting called "Using Aperture Ring" that you can setup using the menu and c ... Pentax *ist DL (W/18-55 LENS) Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe

Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have a Canon Powershot A70 digitical camera. It is about five years old.I use re-chargeable batteries.I use the camera periodically usually having to recharge the batteries before use. However when I placed the batteries in the camera the lens extended but there was no image on the lcd. The flash still works but the camera won't take a photo.

Hi, \015\012You said that Canon A70 has blank screen and takes blanck picture. Its issue of bad CCD Imager in camera. Canon announced a scheme to repair this problem free of cost. Please click on ... Digital Cameras

Camera works fine with power supply cord connected. It will also charge the battery if connected to camera and power supply connected to ac outlet. Checked battery and it has 8.32 Volts stored in it after charge, however the camera will not power on with fully charged battery. Checked DC connection plug where power supply connects to camera and battery voltage present at connecting port with charged battery connected. Checked 3 Spring pins where battery connects on camera and voltage present whe

Your charger is probibly the problem i had a friend of mine that had the same problem but different camera i told him to get a new charger he did and it worked so yoyu do the same goodluck:) please rate this solution... ... Digital Cameras

Viewfinder focus I am unable to properly focus using the viewfinder and see a clear focused picture even with trying to use the opitcal zoom. However, I have no problem using the lcd and adjusting the optical zoom to get a clear picture. is there something wrong with the lense or have i inadvertently set a function on the camera.

Mickykay, Have you tried focusing the diopter? The focus wheel is just left of the viewer. If you know all this then consider one more thing. There is a plus and minus setting for your eye so roll the wheel slowly to not miss the sweet spot ... Panasonic Lumix DMC-FZ50K Digital Camera

Nikon tells me that the biggest card that will work with my 3200 is a 512mb. However there are much larger cards sold for this camera that are "guaranteed" to work. can I use a 2gb card? What problems might I see if it's not working.

SD cards up to 2GB should work in the 3200. Nikon's claim is due to the fact that at the time the 3200 was released there basically were no cards larger than 512MB and thus larger cards had not been tested.Cards larger than 2GB are ... Nikon Coolpix 3200 Digital Camera

I have a new Panasonic DMC-FZ38 digital camera and I seem to have a problem capturing video footage to a PC. I can record video on the camera and it plays back on the camera quite satisfactorily. However when using the supplied software (Photofun studio 4 HD Edition) to transfer images to the PC it fails to recognise that there are any video images. Only the still pictures are transferred. I have tried using other software also and that also says there are no video images. I cannot find anyt

I recommend downloading quicktime player. This player is made for playing pics and videos from these cameras. ... Digital Cameras

Ok so i have a canon rebel xti 400d and i have put a speedlite and bower both compatible with my camera model but they wont work with miy camera or any of my friends with the same model. The speedlite is used the bower is new. is there something that i need to do to make it work? please help

You will have to go into the setup menu and set it up for hotshoe, instead of cord or IR. ... Canon EOS 400D / Rebel XTi Digital Camera

I used to be able to view a picture within the 10 second review timeset immediately after shooting with the 'zoom lever', however, this function is not working now. Any suggestions as to what i need to go to in the menu to get this function working again.... or is it a malfunction with the camera?

Sounds like the settings just got changed - to change the Review time setting do the following:\015\012\015\012-Press the MENU button on the camera\015\012-Under the camera settings menu (the tab with the camera icon), use the down ... Canon IXUS 80 IS Digital Camera

Lense error my camera work well, but it does not open because lense error occur

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon Coolpix S1 Digital Camera

Brightness I recieved a fuji finepix f420 digital camera for my birthday last year, and up until now it has worked fantastically, ive got some great pictures at football matches and concerts etc. However, recently, i have started using the camera outdoors, and have been having problems with very bright pictures. I was recently climbing snowdon, and wanted to take some shots. It was a sunny day, with no clouds. However, the sun was directly behind me, where i believe it should be. After tak

Kindly provide me with contact details of your repair centre in New Delhi, India. I have fujifilm f420 finePix digital camera and facing problems inusing it.\015\012\015\012Regards\015\012\015\012Alok \015\012 ... Fuji FinePix F420 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2654 seconds