Having problems with your Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens ?

Main dial not working

\015 The main dial on my Canon 400d won't change the aperture or shutter speed settings. Can you help?\015

Answers :

Repair Help & Product Troubleshooting for Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

D7000 main command dial doesn't seem to be working. Many functions say to press a button nd then use main command dial for the options, but it doesn't scroll through any when I turn the dial. For example, for auto focus modes. Any ideas?!

... Nikon D7000 Digital Camera

Main command dial not working

... Nikon D200 Digital Camera with 18-70mm Lens

Canon 450D Main dial not working

Spillage or impact damage that breaks lands in the flexible top cover circuit can cause this problem, as can sand which wears away traces on the switch contacts on the circuit itself. Impact can also cause the flex from the top cover topull loose or ... Canon EOS 450D Digital Camera

The main dial on my Canon Rebel T1i isn't working. This prevents me from using auto exposure bracketing. Any ideas?

... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

The main dial on my rebel xti is not working. any thoughts?

... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Main dial on canon 30D not working

... Canon Digital Cameras

I have a Nikon D3 and the main command dial will not change shutter speed. It will change info in the rear control panel but not the shutter speed in the top panel.

... Nikon D3 Digital Camera

Olympus e10 problem. Even with new batteries, could only take a couple of shots before the low battery icon came up & camera shut down. Would work fine using mains supply. Fixed by buying new battery holder. Now 3 weeks later doesn't work again - low battery then switch off both using batteries or mains power supply. Any ideas appreciated as it's a great camera when working. Thanks

You didn't say what type of batteries you are using. Best are CR-V3 lithium which should give 500 shots. 2300 mAh Ni-MH rechargeable batteries should give 200 shots. Worst are alkalines which Olympus do not recommend. Have you checked the co ... Olympus Digital Cameras

When reconnecting my Sony ccd-f375e camcorder using the mains adaptor it initially worked. However when I switched of and on again it has failed to work. The light on the mains adaptor is on which suggests that power is going thru. I have tried to cleaning the terminals on the adaptors connectors to the camera but this also failed. Any thoughts? I have ordered a new battery just in case it is the mains adaptor.

Hi,Sony CCD-F375E is pretty old model camcorder that was launched in July 1991 This type of camcorders got known problem of leaky surface mount capacitors and solution was to replace these leaky capacitors carefully with proper soldering ... Digital Cameras

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.

Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

I have a SVP T-100 camcorder which all of a sudden stopped working. What is happening is it keeps showing a red light indicating there is no power in the battery and when you connect to the mains it turns green but when you try switching on it goes red again and stays this way!! I have tried a new battery in it and the same thing...the fact that it wont even work from the mains indicates something wrong with the powering getting to the battery or camcorder... Please help. Thanks Maxine xx

... Digital Cameras

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.

I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

My Pentax *ist DL camera has started to give me problems. The rotary control dial on the top left of the body does not work. When I turn it, it does not display the setting as set on the dial. In addition the flash has stopped working. It takes good daytime photos.

Hi,it is best to be sent for repairs, since it appears that something is wrong inside of your camera. Software doesnt respond to the switches, it is best to be not turned on and sent to repairs. ... Pentax K20D Digital Camera

1. Mode Dial not working, "Take-Picture-Button" not working.

If the camera was dropped, then it's really causing those kinds of issues like mode dial and shutter button will not work.\015\012\015\012But you could still try these steps below:\015\012\015\012First, do the POWER RESET: ... Samsung Digimax S630 Digital Camera

Mode dial is no working properly

... Panasonic Lumix DMC-FZ18K Digital Camera

How do I change the aperature in the manual mode. As I change the shutter speed using the top dial, that works fine however, I'm having trouble using the dial on the back to change the aperature. What should I do?

Make sure that the power switch is in the correct position.It actually has three positions:\012\012Off\012On (with quick control dial disabled!)\012Third positi ... Canon EOS 40D Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

Fujifilm Finepix J28. Have charged battery, but camera will not switch on. Will work if still plugged into mains socket. Why will it not work on battery.?

Your\015\012problem\015\012may be due to corrosion on the battery contacts inside the camera - which can\015\012prevent the full power of the batteries from flowing into the camera.\015\012Try this free fix before you do anything else: remove the bat ... Digital Cameras

My camera is not working well, the dial only work in automatic, lanscape and night option, the problem is on pet/child, movie, tv, etc, options. Do you have an idea how to fix these issues?

Go setting option in the camera and reset it, then use. If the problem ongoing then please visit service center. The dial may short from the inside. \015\012Thanks. ... Canon PowerShot SX100 IS Digital Camera

I have a Canon E80 that I bought several years ago. I connect the power supply from the electrical outlet to the camera and the power light comes on but the camera does not work ( I can not charge the tape the video camera does not work). What I can do it?. The main purpose to run the camera is transfer the videotapes to dvd and I can not do it. I would appreciate your support to transfer the 8mm tapes to dvd.

... Digital Cameras

Black-out I've had my camera for about six months now, since February. It's worked fine, and I never had a problem, until about two weeks ago. Now, when I turn it on, all I see is black. If shaken it shows an image for about two seconds, before it goes black again. Taking pictures doesn't do anything, it's still black. Sometimes I can get an image, but it's grainy and only shows up as blue with light on the main object. It's worked fine up until now. I've changed the batteries a few times, but i

Mine was given as a gift for my birthday: no reciept. how do i get it fixed???? they only will keep it under warranty for one year with a reciept..... ... Kodak EasyShare C533 Digital Camera

Wont work 20 is flashing in the lcd and mode but doesnt affect it? i have the d60 but it wont turn off, i tried swsitching it off **** it doesent work, it doesent take pics either i rotate the command dial and nothing happens,, whats worng help me , 5 months old

Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Nikon D60 Digital Camera with 18-55mm + 55-200mm lens

E:91:01 My camera got wet a couple of days ago and since then the flash symbol and the E:91:01 error message comes on whenever I switch it on. It only works when plugged into the mains (the battery will not charge). All functions apart from flash seem to be working, and it still takes pictures when plugged in.

According to the user manual an error 91 means that the camera has malfunctioned. You need to reset the camera. Here is how you do that: ... Sony Cyber-Shot DSC-P200 Digital Camera

A Canon A570IS will power on and and everything works with external power (3.5-3.7V, 2A. 3rd party) but is dead with batteries (two fresh alkaline or NIMH AAs). I have used parts (from junk 570s) and have replaced the main board, button board, flexicable that includes on/off switch & shutter, leds, etc.. Again, lens, flash, storage, LCD, etc. work with external power, but not with batteries. I am at a loss. Any suggestions?

Since the external power works, we need to know, first off, if the battery terminals have continuity with the external power supply contacts. That will tell us an important part of this puzzle. The one hard thing about this problem, is that what ... Canon PowerShot A570 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1526 seconds