Having problems with your Canon EOS 40D Digital Camera ?
LCD says "firmware update program" when battery is inserted..
\015 It also says "update file cannot be found. Please check the memory card and reload the battery and try again."\015\012\015\012\015\012\015\012It shows up when I insert the battery, even when the camera is off. It wont let me go to menus or anything.\302\240\015\012\015\012The memory card I am using is one I used in my older Rebel Xt and is a Lexar Professional CF \302\240\015\012\015\012I JUST took it out of the box like this, is there an easy way to fix this or do I need to send it back?\015
You probably put a firmware update on the memory card for your old Xt. You need to open the memory card on your computer and delete the old firmware update.
Repair Help & Product Troubleshooting for Canon EOS 40D Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
LCD says "firmware update program" when battery is inserted..
You probably put a firmware update on the memory card for your old Xt. You need to open the memory card on your computer and delete the old firmware update. ... Canon EOS 40D Digital Camera
When control dial is set to Tv the lcd says it is in P mode, When set to Av it says M. When set to portrait, it says full auto, the control dial will only show P, M, A-DEP,full auto and sports. I have updated the firmware, but still the dial does not give all the functions. Any ideas??
Sorry we are not able to help you with your problem. ... Canon EOS Rebel XSi Digital Camera
I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju
Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
Hello, My Canon EOS 300D has no display and says busy in the view finder and in the lcd screen also. The focus and flash still work. Can you please tell me what could be the problem. I have taken out the battery and card and it does not change anything. It was working properly but suddenly it does not take any more pictures... i read some of your comments to change the firmware but i was not sure for that i wanted to take your opinion... thanks Mirdash
Hi\012I think your unit has memory card receptance unit bad.( the CF card inserting area pins---bent and shorting), or some of loosen screw moving around and shorting. Mostly it is the pin problem. Your local repair shop would charge around $50 to ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm and EF 75-300mm Lenses
Canon EOS 350D LCD Does't show Pictures, and can not take pictures. It does not work with CF card or without. all other camera functions work and the lcdd works for all menu functions. Things I tried I tried removing battery. Updating the firmware.
Sounds like a faulty CF card, or it's not been placed in the camera correctly. ... Canon Rebel XT / EOS 350D Digital Camera
I have a canon 40d SLR on Tuesday this week I updated the Firmware to 1.0.8 from 1.0.5 with no problems.but now find that when I review a picture on the LCD no problem,When I zoom in on the LCD screen no Problem but when I zoom out again this switches the LCD off. this was not a problem until I updated the Firmware can u Help Derek Pedder,[email protected]
Put all camera funtions back to factory defaults ... Canon Digital Cameras
I bought a spare battery DMW - BCG10E for my Panasonic DMC-ZS3 Digital Camera but it doesn't work since the firmware is meant for Version 1.1. Should I try to downgrade my firmware to V. 1.1 in order to be able to use that battery? Or, is it going to affect the quality of playback HD videos? In any case, I tried to download the firmware Update 1.1 Driver for Mac OSX to be able to use that battery but couldn't find any internet server capable of doing it. Thanks!
Hi.Most batteries of this kind work with firmware 1.1 and following \015\012(1.2,1.3 and 1.4). They never work with the 1.0 version, which was \015\012built in in earlier DMC-ZS3. Check your firmware version. If you have 1.0 ... Digital Cameras
Sony dsc-t100 Tried to update to firmware version 2. Camera tries to "Updating Dont turn off". Eventually goes to "Error 10". I can't press anything except round Select button which restarts the updating process again and eventually error message again. I can't find the original firmware anywhere on the web. Only version 2. I believe finding a firmware other than version 2 may solve this problem. Also tried resetting camera. It always goes to same process described above, once the battery is put
Please open the page by clicking the link provided below.http://esupport.sony.com/US/perl/swu-download.pl?m ... Sony Cyber-shot DSC-W80 Digital Camera
Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the
... Sony Alpha DSLR-A200 Digital Camera
Drained batteries I have a FE210 digital camera the batteries go dead after a few pictures yet when I check the batteries they era good. purchsed 4 aa size batteries-had 25/30 shots. bought 2500mah batteries, charges fully-- had 20/30 shots or half an hour of camera operation and battery shows empty on screen. tried a couple of times but in vain. the empty batteries are inserted in other digital cameras, its running fine. checked the camera with olympus authorised repair agency, they say camera
Digital cameras do use a lot of power to operate. Somethings can make the batteries die faster. Even if the batteries may have worked in other cameras after ou used them in yours could just be that the other camera requires less power to operate th ... Olympus SP-550 UZ Digital Camera
DSC-W200 Frozen My W200 has the lens open (extended) and will not close. Additionally, when I press the power button or the play button on the back, the LCD lights up and says Sony, but nothing else happens. I've tried connecting it to my macbook, using a fully charged battery, memory card vs no card, etc. Nothing seems to work. If I press the power button a seond time, the green power light goes off, but the LCD still says Sony. Any help would be greatly appreciated. Not too eager to send it
Try this it works for lens problems like you describe ]]] OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local gara ... Sony Cyber-shot DSC-W200 Digital Camera
I have an Acer Aspire 9410 with the built in Orbicam, the program pops up every time i start up the computer and then it tells me it needs an update, and begins to try and update itself with out me doing anything. Shortly after it stops and says the feature you are trying to use is on a network resource that is unavailable, it says click OK to try again, or enter an alternate path to a folder containing the installation package 'Orbicam.msi'. I have no folder that contains that , and whenever
Http://support.acer-euro.com/drivers/notebook/as_9410.html ... Digital Cameras
Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...
Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera
Ist issue: how do you get the battery out? I have been using a nail file to pry it out. 2nd issue: the charger blinks green and orange whether battery is inserted or not. Battery does not seem to charge. 3rd issue: I have camera plugged in by USB. The green power light comes on but that's it. The LCD screen doesn't light up, no other buttons seem to work. Where does my issue lie? Is it the battery, the charger or the camera?
1st- you shouldn't have to do this. Stop filing your nails and you will be able to pry the battery out with a fingernail.2cnd- I can't decide whether this is a bad battery or a fault with the charger. Either way, the battery won't charge, ... Polaroid T737 Digital Camera
I keep inserting brand new batteries and immediately when it turns on it says " BATTERIES LOW" that the batteries are too low to take pictures../
... HP Photosmart M425 Digital Camera
My Nikon 1 says to insert a fully charged battery cannot take pictures. Well my battery is fully charged....You think my battery is bad? I just bought from someone on Ebay, wonder if its broke...any suggestions?
... Nikon "1 J1 Mirrorless Digital Camera with 10-30 mm VR Zoom Lens Black"
Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.
Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera
Lens stuck out No display No link to computer but will charge battery. Only way to power off is remove battery. Numerous key holds when power on result in no change. View lott's on FixYa. Try gentle but firm exercise of barrel, left right with success when some inward movement felt. Insert battery, power on, screen display yes, take picture yes [onboard memory as no SD installed for tests]. Will update if problem comes back. Gentle but firm is the key, good luck.
... Samsung HZ35W WB650 Digital Camera
I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi
Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras
Depleted Batteries I have a Pentax Optio S40 with new batteries and the camra is saying on the LCD screen depleted batteries, I have changed them many times.
Clean the contacts in the battery chamber\015\012to get to the bottom of the chamber use an eraser on the end of a pencil\015\012Also the top contacts. you could also try packing out the contacts on the tops of the batteries to ensure good contact. ... Pentax Optio S40 Digital Camera
Always says low battery; when new battery inserted, it froze
CALL DIGITAL POWER PRO @ 801-934-6269 OR GO ON-LINE TO DIGITALPOWERPRO.COM,\015\012THEY SHOULD BE ABLE TO HELP YOU. I BELIEVE YOUR BATTERY IS COMPATIBLE WITH THE FUJI NP40 ... Vivitar ViviCam 7500I Digital Camera
I have a canon A520 Powershot camera . I have 2 problems, 1st, when i take a picture and view it on the LCD there are white lines going horizontal across the picture. The scon proble is, I put in a newly charged pair of batteries and the camera works for 5 minutes and then says please change the batteries.
The battery issue seems to be a problem with this model after 4 years, unfortunately you have to open and close the battery compartment to clear this error. This is not a permanent fix. ... Canon Digital Cameras
I have a sony DSC-W150 and the camera turns on but it says "for use with compatible battery only" and then turns off. I talked to a sony representative and they told me to take the battery out and then hold the power butter for 30 seconds but that didn't work. They told me that it is probably the firmware and said it would cost over 200.00 dollars to get it fixed is there any way I can fix this myself? What else can be the problem?
I just bought a Canon Camcorder that has some sort of code that won't let it charge up while in the camera and plug in to the house outlet, unless it is made by Canon. Maybe Sony is doing the same thing. A new Sony battery goes for $40 to $50. Cheape ... Digital Cameras
Failed to initialize program. The downloading program is not initializing. Cannot transfer pictures from camera to computer. Also, batteries don't last long. Canon site says my camera needs service. Is that true?
Try NOT connecting your camera to your computer.\012 \012 The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the compute ... Canon Powershot SX110 IS Digital Camera 9.0MP
When I turn my camera on it says "Access" then a message comes up that tells me to "turn the camera off and then on" I have tried this many times and all the camera does is continue to push the lens in and out and then tells me to "turn camera off then on" Problem will not go away. Fully charged battery, took battery and memory card out for a while and re-inserted both and have same problem. [DSC-W55
This is a firmware problem that is common with many many digital cameras. It will have to be upgraded. The company will do this for $50Otherwise you may be able to find a kit online and do it which would be hard to located ... Sony Cyber-shot DSC-W55 Digital Camera