Having problems with your Canon EOS 40D Digital Camera ?

My ISO range only goes from 200-1600. How do I switch to ISO 100 or 3200 (H)?


Answers :

You need to set Custom Function 1-3 (ISO Expansion) to enable the H setting. You also need to be in one of the Creative Exposure modes.
Repair Help & Product Troubleshooting for Canon EOS 40D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My ISO range only goes from 200-1600. How do I switch to ISO 100 or 3200 (H)?


You need to set Custom Function 1-3 (ISO Expansion) to enable the H setting. You also need to be in one of the Creative Exposure modes. ... Canon EOS 40D Digital Camera

Battery/Power trouble My C-770 is 2 years old and I still have the original L1-10B batterys that came with it. The camera goes through periods of non-use so has not been used excessively. When I put in a newly charged battery the battery indicator says the battery is full, but then take one picture and the light blinks empty and usually dies with the lens out and the ISO numbers still on the screen. I switch the power button into the off position but it generally takes a min before it actuall


Using a little common sense I'd be checking the batteries first. You're going to need a new one sometime anyway so get a new one and try it out. Just make sure your battery charger is working first. It sure sound like battery problems to me. ... Olympus Camedia C-770 Digital Camera

Lens Error and Proper switching on Problem


\012Same problem for me. Try below one. Its working!!!\012\012Press the power-on button, and at the same time Press and hold the shutter button down\012 ... Digital Cameras

Omgggg help me please im gonna die for this kodak camra ok well i was in borders book store and my friend wanted to see my red kodak easyshare m853 and as i was handing it too her we dropped it when the lens was extended and for the first 2 min after dropping it it worked fine i jus picked it up and went on than like 5 min later it said lens error 1,22,1,0,0 or something like that help other people said force the lens back in but when i try i can see the screen going to pop open and i dont wanna


Please don't die. Unfortunantly this fault needs to be repaired.\015\012\015\012Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012\015\012An Out of Warranty repair for this model fo ... Kodak EasyShare M853 Digital Camera

After turning the camera on it goes to a full zoom mode. After 15 seconds the screen goes black. After 1 minute the camera shuts off. During the 1 minute the camera is on, none of the buttons work except you can switch over to view pics on the card.


Have you done anything recently like update the software on the camera? Can I get the make and model of the camera in question. Sounds like the camera board has gone bad with all of the symptoms that you are having. In this case then you would need t ... Digital Cameras

When i switch on my kodak easy share c613 camera, it displays lens error:111,0,0,0 followed by lens error :221,0,0,0 and then goes off.please help.


Good\012 day,This is a common problem and sometimes can be fixed.Please\012 see details on my tip on how to fix this error here: ... Kodak EasyShare C613 Digital Camera

DSC-W70-mode switching,format. Hello, I have 3 troubles with dsc-w 70: 1. During work manner interchanging mode switching without my hindrance is included and it precesses. 2. It joins in during work without my hindrance (format). 3. With regarding the photographs, some of them are with very little size, As (penny). You help out please, I thank ahead.


Well for the small size you can press the delete button( bin icon) and select 7MP that should upscale your photos . ... Sony Cyber-shot DSC-W70 Digital Camera

1. i get no responce whatever from the camera,even withmains power connected. 2. when i open the tape compartment, nothing happens. 3. when i switch on play nothing happens (black screen) when i switch to take video mode nothing happens (black screen)


Dear sir,\015\0121.check with New battery. if not helps\015\012 \015\012According to u r camera symptoms it seems to be camera is entirely dead.\015\012It is better to take to the service provider of Yo ... Digital Cameras

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

M753 LensError 115,1,0,0


Try these procedures. ... Kodak Easyshare M753 Digital Camera

When i try to format the SDHC 8GB memory card the recording screen display's (Waiting....) for about 1 to 2 second's, then goe's to the normal recording screen and when i push the record button it display's memory full, but the card is new and doesn't have anything saved on it. Can you please tell me what i did wrong, and how to format the card so i can use the camcorder. Thanks For Your Time Dean


Hi, look here's what to do, get yourself, or access to, A Computer, and a USB SD card reader, now, insert your 8GB SD card into the reader/writer, It will show up as a HDD in My Computer, and then, Format it FAT32. Now return it to the Camcord ... Jazz Digital Cameras

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks


This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

1- How do you set ISO? 2- How do you set aperture and shutter manually? 3-How do yu open the blue "operating instructions" disk?


The ISO is set in the camera menu. You can't set the aperture and shutter manually...this is basically a point-and-shoot camera with some nice features. You should copy the disc to your computer and then open it from there by double-clicking on it. ... Panasonic Lumix DMC-LZ2 Digital Camera

What is lense error 412, 1, 2, 0? - Kodak Easyshare M753 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak Easyshare M753 Digital Camera

I have a Nikon D90 with 18-105 mm lens. Lately, the onboard flash has not been firing even when I try to enforce it by having the flash popped up. It will only fire if I do one of the following: 1) unmount the lens from the camera body and then re-mount it back on, which the flash will fire maybe once or twice and that's it!, or 2) switch on a different lens which definitely works with the flash firing every single time. What needs to be done? I purchased this lens last December (2009). Is


Sounds like a dodgy electrical contact, possibly between the lens mount and the camera body. The lens ought to still be in warranty, but that would depend on what warranty the manufacturer or seller offer in your part of the world (in the UK, the sel ... Nikon D90 Digital Camera with 18-105mm lens

The lense is not coming out and no display. Following id the camera condition: 1. Battery is new 2. Camera is switched on 3. Mode is camera (NOT view) 4. Pressed button "display"


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A520 Digital Camera

I have a samsung S630 digital camera, about 2 years old. It seems to have stopped being able to download images onto my laptop. The laptop recently was recently repaired and I'm not sure if they removed some programs... I've tried reinstalling the software on the CD ROM that came with the camera, plus updating Adobe etc, but nothing works - when the camera screen comes up with 'connect to computer', I press 'OK' but then it just goes black and switches off! Any suggestons?


Do what the pros do...use a card reader. ... Samsung S630 Digital Camera

Hello. I've a panasonic camera model dmc-fs10. I bought it in uk over 2 months ago and its not doing well at the moment. The screen comes on and goes off on its own even if the power switch is turned on. May I know what is the problem with it. Another thing,this camera has a 3 year protection,can I have it repaired here in australia in any panasonic center? Thanks and i need your help. Teresa


Teresa, the repair warranty can be honored in Australia if it says so in the small print. You need to show the warranty to the camera store representative. It sounds like a power problem and not always in the battery. Are you sure the cha ... Panasonic Lumix DMC-FS5 Digital Camera

The camera will not switch on -just flashes red and goes off again . This camera is 2 weeks old!


This normally indicates low batteries. If you are using standard (not rechargeable) batteries you probably need to replace them. If using rechargeable batteries, make sure they are fully charged. If that doesn't fix the\015\012problem, check the ... Kodak EASYSHARE M340 Digital Camera

I'm trying to shoot HDR photos using my XSi/450D. From the menu two I've set the AEB EV step range as 0, -2 and 2. From here, though, I don't know what to do. If I go directly from the menu to shooting, I don't get any automatic shots, but rather single, individual shots based on the current exposure settings. Help. I've scanned my 45D manual, DVD tutorial, etc. and cannot find my missing step to create a series of AEB shots. Many Thanks, Robert


... Canon Digital Cameras

I have a Nikon D40. I wish my photographs to be numbered consecutively, 0 to whatever the numbering system goes up to (9999?), even when using a new card, without going into different files or whatever. I named a file "Card 1". The photographs come out labelled "100Card1 DSC 0001" etc. Yestreday, for no apparent reason, having reached "DSC 1021", it then started back at zero and was labelled "101Card1 DSC0001". When I go into the Folders menu there is no mention of "100" or "101", just "card


You need to set "file number sequence" to "on" in the setup menu.\015\012However to get to this menu item you need to ensure that "CSM/setup menu" is set to "full", also in the setup menu.\015\012\015\012\015\012\015\012The setup menu is the on ... Nikon Digital Cameras

Anti-shake problem My Konica Minolta 7D stopped taking pictures. It will still auto-focus, but nothing happens when you press the shutter button all the way down. The problem I experience is: 1. Shutter does not release. 2. When camera is powered up, after the initial lens shuffle a clicking sound is heard. 3. The auto shake bars (all five of them) to the right of the view finder are blinking 4. Show 0 (zero) as the number of frames remaining in the view finder. 5. The problem is intermitte


Symptom 1: referred to as FFB (Firts Frame Black). this is when you do not use the camera for a while and when you attempt to take the first snap shot, the Shutter is either stuck, or takes a blank/black picture (some cases the picture came out bluis ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

1. Will it support a 8 gig CompactFlash card? 2. I forgot to switch off before inserting the card and now the whole thing appears to be dead. Is there anything I can do?


Take out all those things you inserted and take the battery out. and start from the beginning... ... Nikon D1X Digital Camera

The battery on my canon s100 goes from 3 lights to 2 to 1 flashing all in one day without much use.


... Canon S100 / Digital IXUS Digital Camera

LCD Problems Hi, My Rebel XT's Top LCD screen and Display in the view finder isn't working properly. It displays random "symbols" but is identical in both. An example of this is the range finder will roll down but 3 notches will stay lit up ( 1 on one side 2 on the other. Do i need to send it to back to Canon?


Probably a canon repair situation ... Canon Rebel XT / EOS 350D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1442 seconds