Having problems with your Canon EOS Digital Rebel XS / 1000D IS Digital Camera ?

My new canon 100d is not switching on

\015 My new canon 1000d is not switching on when I put it on. it only goes on when i remove the battery and puts it back again.What is the problem? how can I solve it?\015

Answers :

If it is new, look in your manual and make sure you have properly followed the setup process. If you have, and the camera has been used and was OK before,then it is faulty, and therefore you should return it to your supplier for repair under warranty.
Repair Help & Product Troubleshooting for Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My new canon 100d is not switching on


If it is new, look in your manual and make sure you have properly followed the setup process. If you have, and the camera has been used and was OK before,then it is faulty, and therefore you should return it to your supplier for repair under warranty ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My canon EOS 100D digital SLR is saying 'card write protected' when ever I turn it on. It just started to appear on my screen for no apparent reason one day and it won't let me take pictures anymore. It's not the card it's the camera, I have tried sliding the switch on the side of the memory card and even tried new cards in my camera but it happens with every card I insert. I have googled the problem and can't find any solution to fix the problem. Would be very grateful if you could help at all


... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Review switch Having had no problems since new 18 months ago, my A85 is stuck in review mode leaving me unable to take any pictures. The switch now has no effect. The unit has been very well looked after and not subjected to any shocks or damage. Is this a return to Canon to fix it or would it be economical simply to buy a new one? (not under warranty)


It seems that the switch to toggle between camera mode and playback is broken, as it happens in most of the cases. the replacement of the switch will do the job. ... Canon PowerShot A85 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

My Canon T2i battery is about 1/4 to 1/2 down. Can I recharge without creating a memory? I have a Canon RS-60E3 remote switch. Will it work with my T2i? I have a Sun Pak pwer zoom flash that I used with my Canon SLR Rebel Gll. Is it okay with my new T2i?


You don't have to worry about a memory effect with lithium-ion batteries.\012\012\012Before anyone can tell you whether a Sunpak flash would work with a digital camera, you'll have to tell us the model of the flash. You can try checking f ... Digital Cameras

I have a canon poershot A85 with error E18. It was working fine until I switched off for a few minutes. When it was switched back on, the lens stopped halfway and the camera "locked up". On putting new batteries in, I have got the lens fully out, but it is now stuck there and I'm still getting the E18. Any suggestions?


I would suggest you go and buy a new camera as they are so hard to get repaired and if you dont know how to work on them it makes it even harder.you will get a lot of odd advice on here as you are alreay figuring out but your best solution is to go g ... Digital Cameras

I bought a new canon 1000d $ when I put it on it does not switch on until I have to open the battery compartment pull the battery out put it on before it can function. I have to do this Exercise each time I switch the camera off.HOW DO I SOLVE THIS PROBLEM?


... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I have a canon EOS 450D Digital Camera & it won't auto focus using the smaller lens when switched to AF. The larger lens works fine when switched to AF, does it need cleaning or do i need to get new lens?


Hi dear boyd kellie, try clean the lens contacts if no solve contact a Canon service.Best regards ... Canon EOS 450D Digital Camera

Have a brand new EOS 100D with Canon image


Have you actually cleaned the contacts or are you just looking at them and they "look" clean? Clean them with a cotton swab lightly dampened in rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I've had my Canon SD880 for awhile and have never had issues uploading pictures to my old PC. However I recently switched to Mac and seem to be having issues now. I downloaded all the camera software and once I tried to upload new pics, I received a "Failed to initialize program" message and can't seem to get any further. Any thoughts on what to do here? Thanks.


Use a card reader instead of the camera and download to a folder you create on your desktop. From there, you can do what you want with the pics. ... Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera

Have a new Canon Camera with 2gb SD card. Card was OK at first but now comes up as card locked. Installed in a different camera with same results. Lock switch on card is in unlock pos.


Hello. your SD card has a tiny switch on the card itself which locks the card in one position and unlocks it in the other. The purpose of the lock is to prevent anyone from formating it and losing it's contents. Check your card and I believe you w ... Canon Rebel XT / EOS 350D Digital Camera

My Canon PowerShot A85 hasn't been used much. Every now and then - when I switch the camera on - I just just get purplish mess on the screen. It's not the screen itself that doesn't seem to function (the review mode with taken pictures does work). The CCD seems to be malfunctioning. But then, after a while and while, the camera just decides to act normally again. Could it be I need new firmware? If so, how and where can I download that? Thank you for your attention. Frank.


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A85 Digital Camera

No image on screen when switched on. New batteries fitted. Canon Power Shot A60.


Hi,If your Canon A60 camera shows previously saved pictures in memory card in playback mode but does not show live view in camera mode than ccd imager chip in camera got defective and will be replaced.Canon offers free of cost ccd imager ... Canon PowerShot A60 Digital Camera

I have a canon xl2 camera which is presently at an event that my company is supplying equipment for. the camera is experiencing intermittent video output to our video switching system (which is new and we have thoroughly gone through with a factory tech and has been eliminated as being part of the problem). We have replaced the bnc cable connecting the camera to the switcher and it should also be noted that we have added an amplifier to the cable run but that has not eliminated the problem. The


Ok...I suspect that its something wrong with the BNC out...to see if this is the problem ...try to connect it using the IEEE1394... (firewire) .directly to a pc ...or so ...the driver should not be a problem ... cause the camera its very common ...an ... Digital Cameras

I got a new 4gb sd memcard for my 2005 canon ixus 50, screen shows " memory card error" "card locked". tried switch on card as u suggested, no diff.


4 GB memory cards do work, i use one. just look along the left side of the memory card. there is an arrow labelled lockslide the button on the left side so it isn't locked. hope this works ... Canon Digital Cameras

I have an old 35 mm Canon A1. I can't get it to click a photo or advance. It has a new battery. This happened to it once before and it turned out something had accidentally been switched on that froze it. Help!


The shutter on the A series Canons is controlled by magnets. These are under the bottom cover. Due to their age, contaminants can cause them to stick. If you have the proper cross point screw driver, you can remove the bottom cover, (3 screws) and ... Digital Cameras

Hi there We have a Canon Powershot A570IS digital camera, about a month old. Since changing the batteries once, the camera "low battery" warning light blinks every time the camera is switched on, and then it just cuts out with a "change the batteries" message. The new batteries are fine. They have been checked with a voltmeter and are giving spec of 1.5 V each. Any ideas? Thanks for your help Andrew James, Wantage, Oxfordshire, UK


Here are some simple things to try first for a camera that won't power on properly. They won't work for every case, but they're worth a try:\015\012\015\012 ... Canon Digital Cameras

I need to replace my Canon a610 battery door. I have the door and I need to know how to switch it out for the new one.


... Canon PowerShot A610 Digital Camera

I have a canon s21s power shot, my problem is that i just replaced the 4 rechargeable battries with new ones,now my camera will not stay on, i turn the power on and it clicks the light comes on but as soon as i remove my hand it powers down and if i try to switch to the other side it does the same thing


It sounds like the batteries are not charged. New rechargeable batteries usually are not. Try alkaline batteries just to test the camera. ... Canon PowerShot S2 IS Digital Camera

Camera problem with an old Canon "Sure Shot Max". The lens will not emerge when the opening switch is used. Battery is new, and film has loaded ok. Any ideas?


Sir,\015\012\015\012Click this link and read it. Hope it will works....\015\012\015\012http://www.wikihow.com/Use-M42-Lenses ... Digital Cameras

Received a new SD990 IS today. Charged battery, inserted and switched on. Blue Canon screen appears but no request to set date and time, and none of the buttons have any effect. After about 30 seconds it powers down again. Seems to me it must have been damaged in transit. Any advice about things to try would be welcome, but I guess I may just have to send it back. Alistair. (Edinburgh) [email protected]


Best bet is to send it back for a new one. ... Canon PowerShot SD990 IS / Digital IXUS 980 IS Digital Camera

My computer doesn't recognize my camera ViviCam 3785 I could not get my new Canon SX110 to be recognized by my pc. I was using a similar cord for another device. After I switched to the white cord that actually came with the camera - voila! No problem, it worked like a charm. I guess all cords are not made alike? This site helped me, I hope this helps someone else who may need a little more description.


I run into this problem all the time with different cords. It seems that vendors like to keep you returning only to them when you have a problem with their devices. Thanks for the post ... Canon PowerShot SX110 IS Digital Camera

Fairly brand new (less than 6 months old) Canon rebel xti - shooting in manual mode, then it gives a low battery message. I switch the battery and nothing. I recharge the first battery and install it, again - nothing. I removed the internal battery and left both batteries out for 30 minutes. Nada. I have barely even used this camera and I am furious. Is there anyone who knows what the problem is? If I seriously have to send it back under warranty already after shooting less than 1000 photos, I a


If its brand new and with less than 7 monthsof usage, you have to send it back and make valid the warranty.\015\012\015\012Such symptoms indicate a malfunction o the DC/DC voltage converter circuitry, and the camera has two of them locate ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Error 16 I just bought a brand new Canon SD400 and a SanDisk Ultra II 1.0 gig Secure Digital memory card. When I use the fast frame rate (60 frames/sec), I often get an "E16" error and then my camera switches off. Can somebody help me out with this? I have searched all over the net for a solution to this, but there isn't much out there regarding this error. Thanks,


Do you have another memory card? can you try the stock canon card and see if it does it with that memory card? \015\012\015\012How do the contacts on the battery pack look? can you clean them? scratch them up a bit with somthing pointed. ... Canon PowerShot SD400 / IXUS 50 Digital Camera

When the camera is switched on it shows only memory card photos but in the camera mode it does not shoot photographs. I sent the camera to Canon Repair center, they told its optical assembly is faulty and it will cost Rs 5000/- which is more than the cost of new camera


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter (a.k.a. "faulty optical assembly") are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck clo ... Canon PowerShot A85 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1774 seconds