Having problems with your Canon EOS Rebel T2 with 28-90 lens 35mm Film Camera ?

I just tried to turn on my camera for the first time in a really long time and nothing is showing up on the LCD screen. I changed the batteries and they are in the right way and it still will not do anything.



Answers :

A couple of things First if batteries were left in the camera the contact surface down inside the camera may be corroded and need cleaning check this with a flashlight. If the battery contact is dark black then it might require some aggressive cleaning. What I use is a piece of light sandpaper formed over a pencil and taped to it set it down inside and spin it lightly to remove as much of the black stuff as possible a Qtip and alcohol will clean out the dust and other partials. Clean off the battery door and clean off the batteries (because you had them in the camera) install the batteries again. If it comes on and works great if it come on but doesn't work correctly then you need to work the camera in.

Working the camera in by turning everything to manual mode including the lens set the ISO speed at 100 aperture 1 stop down from wide open. Set your shutter speed at 1/125 and release the shutter do this three time, set at 1/250 and do it again three times then set to 1/500 and do it three times and again until you reach the cameras fastest shutter speed then back down again. Listen to the sound of the shutter you should hear it increase and decrease in speed. In fact the more you use it the better it will sound.
Repair Help & Product Troubleshooting for Canon EOS Rebel T2 with 28-90 lens 35mm Film Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just tried to turn on my camera for the first time in a really long time and nothing is showing up on the LCD screen. I changed the batteries and they are in the right way and it still will not do anything.


A couple of things First if batteries were left in the camera the contact surface down inside the camera may be corroded and need cleaning check this with a flashlight. If the battery contact is dark black then it might require some aggressive cleani ... Canon EOS Rebel T2 with 28-90 lens 35mm Film Camera

My Canon A2200 has a white screen when I turn it on and stays that way can't see what I am taking a picture of or any menu items . It still takes pictures but cannot view them on the camera and don't really know what I am taking pictures of. Is there anything I can do to correct this. I have chrged the battery fully taken out the memory card and battery and still nothing.


... Canon Powershot A2200 14.1mp Digital Camera red

Power Over the last few weeks I have had issues with the batteries. I found that the "Eveready" brand certainly doesnt work (I am currently in India and it is hard to find anything here!) and I just went through 3 sets of Duracells but after a short period of time it tells me to change the batteries. I just changed them with new Duracells but when I turn the camera on it wont let me get past that initial little birdy which is the start up screen. I also just noticed that my zoom lens thinger is


Get Rechargable batteries with charger of good company and try it. Your problem is discharged/ outdated batteries. ... Canon PowerShot A510 Digital Camera

No screen my camers has a black screen and when i take a picture ni picture appears. ive changed the batteries three times and still no screen...but when i turn it on the hp screen shows up so i know the screen works. help...


This is an internal failure and the camera has dies.\015\012HP support will advise- depending on age of camera whether they replace it or you buy another ... HP Photosmart E217 Digital Camera

Hi, I wrote in a couple of days ago about my camera resetting every time I turn it on. It's a Casio Exilim EX-S500. It appeared that the battery wasn't connecting right. I bought a new battery, thinking it might be the battery itself, but it's not. It's just not catching when I push it in. Is there a way to fix this? It doesn't appear that anything is broken/missing in the battery compartment. Thanks in advance for your help.


Hey,\015\012\015\012\015\012Basically, the pins that touch the battery, you can most likely pull or twist them down a little bit without breaking anything.\015\012\015\012\015\012If you want to be sure you don't break it, and ... Digital Cameras

Everything seems to be working but the shutter release button. It does nothing, even depressing the button halfway for metering shows nothing. no indicators in viewfinder info line. I assumed it was a third party Battery problem, as there was a Impact battery being used primarily at the time. However replacing the Battery with a pentax battery didn't change anything. Camera not dropped, or damaged in any way, its a sudden problem i cannot seem to troubleshoot.


Remove the lens and fire off a few shots. Re-attach the lens and try again. That sometimes works. ... Pentax K10D Body Only Digital Camera

White Screen: I turned on my camera shortly after replacing the batteries, but when I looked at my screen, it was completely white. I turned it off, then turned it on again, and the same thing happened. Later, I tried to see if it'll work after I connected it to my computer, but the screen was still white. The camera has been dropped a couple of times, but it wasn't anything severe - just a couple of centimeters from the ground, and I'm pretty sure the screen isn't cracked (I didn't see an


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Digital Cameras

Lens stuck out No display No link to computer but will charge battery. Only way to power off is remove battery. Numerous key holds when power on result in no change. View lott's on FixYa. Try gentle but firm exercise of barrel, left right with success when some inward movement felt. Insert battery, power on, screen display yes, take picture yes [onboard memory as no SD installed for tests]. Will update if problem comes back. Gentle but firm is the key, good luck.


... Samsung HZ35W WB650 Digital Camera

My Kodak EasyShare Z1285 won't turn on (and the batteries are in the right way) and the last time I turned it on, the lens opened up and it shut off without the lens retracting. That had never happened before. I just thought the batteries were dead, but with new batteries it still won't turn on.


You've got to clean the battry contacts with a, dampened in rubbing alcohol, Q-Tip Do the same to the battery and the charging station. ... Kodak EASYSHARE Z1285 Digital Camera

White scrren I have had a kodak easy share Z1275 for about a year. dropped it about 6 mo ago and cracked the screen, however it still worked. Las time i used it was in mid june and it was fine. When i turned it on toady the screen was white. there was a very faint grey shadow/outline of what should have been there. Not enough could be seen to take a picture though. I tried changing the batteries and nothing happed. I can't even read the menu options.


Screen csreen ... Kodak EasyShare Z1275 Digital Camera

I have a sony cybershot camera, i took it into the mountains the other day, and it has not been working properly since. every time i turn it on the lens comes in and olut multiple times and says, "turn the power off and on again." i can still look at pictures on it, but am unable to bring up a menu or take any pictures. i have recharged the battery and let it warm up, but nothing seems to change anything.


DSC-W120===============Hi,You need to replace lens assembly in camera to get it back in business.Lens mechanism is not sending initialize signal to system control due to some reason and system control chip tries to open ... Digital Cameras

My camera will also show pics that I have already taken so I know the screen is still good but won't go into camera mode. I changed the batteries, even the card and still have the problem. I have been using fuji s5600 for three years now and it's the first time i encountered such problem


If it won't go into camera mode then maybe the micro switch underneath the swtich is damaged. It's on a small pcb with 2 micro switches for either of the 2 functions. play back and camera ... Fuji FinePix S5200 / S5600 Digital Camera

I own a canon s2 is power shot. Symptoms began with the digital zoom beeping and the screen going blank when invoked to draw an image closer. After a periood of time of avoiding the zoom, the camera lense stuck inside and gave an e18 message when beeping. I could still survey old pics but can't take new pics as the screen is blank and the lense won't come out. The warranty expired 10 months ago, I've tried forced air, changing batteries and mem card and pressing on the lense. The lense is off to


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Canon PowerShot S2 IS Digital Camera

A few months ago my camera started having problems. no matter how many times i change the batteries, the camera still will not turn on and when it does it flashes a quick image and then the screen goes black and it dies without taking in the lens!!! i am very VERY careful with it and have never dropped it, so i do not understand why it is not working! the Camera is only a year old and i have used it quite a few times and it has never had a problem until now.


Hi,This is a common problem. There is a fault within the lens mechanism. The lens error is common for cameras with telescoping lenses.\015\012 ... Sanyo Xacti VPCS1275 Digital Camera

Hi, in a Kodak C743 , the display was replaced and the backlight remains on even when the camera is shutted off. It only gets off removing batteries. Any software release or connection change is required? What happens if the backlite wire is disconnected?. Do I get a dark screen on the LCD? Can you help? By the way if I decide to buy another replacement LCD screen Gen 1 , what consideration should I take in account in order to get the right one?


There is a brand or model of LCD screen that does this. The buyer I purchased some from is called yallstore. I have not noticed a significant discharge of my batteries but I am using 1.2 volt rechargeables. when a 1.5 volt is installed it really s ... Kodak EasyShare C643 Digital Camera

Hello, My Canon EOS 300D has no display and says busy in the view finder and in the lcd screen also. The focus and flash still work. Can you please tell me what could be the problem. I have taken out the battery and card and it does not change anything. It was working properly but suddenly it does not take any more pictures... i read some of your comments to change the firmware but i was not sure for that i wanted to take your opinion... thanks Mirdash


Hi\012I think your unit has memory card receptance unit bad.( the CF card inserting area pins---bent and shorting), or some of loosen screw moving around and shorting. Mostly it is the pin problem. Your local repair shop would charge around $50 to ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm and EF 75-300mm Lenses

Black-out I've had my camera for about six months now, since February. It's worked fine, and I never had a problem, until about two weeks ago. Now, when I turn it on, all I see is black. If shaken it shows an image for about two seconds, before it goes black again. Taking pictures doesn't do anything, it's still black. Sometimes I can get an image, but it's grainy and only shows up as blue with light on the main object. It's worked fine up until now. I've changed the batteries a few times, but i


Mine was given as a gift for my birthday: no reciept. how do i get it fixed???? they only will keep it under warranty for one year with a reciept..... ... Kodak EasyShare C533 Digital Camera

Hi my kodak camera has a problem. When I start the camera the screen turns all blue and some letters that says, "ERROR L03" and I can't do anything at all. I already change the battery, I charged it, and I put a new memory card and still the same problem. Do you thing that there is a solution for my problem? Thank you


L03 means that the firmware does not have the correct checksum.\015\012Firmware has to be reinstalled. I can help you do this, but as firmware\015\012files and the way they are updated are considered confidential, I can't\015\012help you here in publ ... Kodak EasyShare V1073 Digital Camera

Camera My boyfriend gave me his camera to do my art project with. 1 problem i tried to turn it on but it wont. I changed the batteries time and again still no joy. every bit on it is secured as it ought to be. Im pretty sure it hasn't been dropped or anything help ?


I have the same cam and had the same prob...only to realize that i was putting the battery in the wrong order....follow the diagram in the camaera when you open the battery door...it shows the position the battery goes in. Good luck, i hope this work ... Fuji FinePix S700 Digital Camera

The battery is fully charged. When I turn my camera on, it zooms out, then zooms in, then zooms out, then zooms in, etc. After doing this for about a minute, it finally stops and the screen reads ''Turn camera off and on again.'' But that doesn't do anything. The same thing happens the next time. Is there a way to just reset the camera or do something else to fix it? It is a SonyDSC 150


Try a manual reset...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Digital Cameras

My viewfinder went dark on me while taking pictures last night. The camera still takes pictures fine, but I can not see anything in the viewfinder. I see an 1842 on the screen when I first turn on the camera. Did a setting get changed when I swapped out the battery?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot SD1000 Digital Camera

Was taking pics & everything was okay. put the battery on the charger & when I put it back in the camera a while later the camera turned on, went right off then i hit power on again & it turned on but just a blank (lit up) screen. It won't do anything at all. It does this same thing every time I try turning it on. Goes off then turns on but nothing.Please help! I have lots of sentimental pics of my kids on there that I want to get copies of.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Sony Cyber-shot DSC-S750 Digital Camera

My viewfinder went dark on me while taking pictures last night. The camera still takes pictures fine, but I can not see anything in the viewfinder. I see an 1842 on the screen when I first turn on the camera. Did a setting get changed when I swapped out the battery?


Have you tried pressing the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP b ... Canon PowerShot SD1000 Digital Camera

Frozen Camera I have a Panasonic Lumix TZ3 digital camera. The last time it worked, the screen went checkered, so i turned it off. But upon turning it off, the lens of the camera stayed out like it was taking a picture. Now it won't turn on. I've tried recharging the battery, changing memory cards, no memory card, switching settings and turning the on/off switch. Is there anything to be done or I do I just need to get a new camera?


Try letting it drop about 4 tto 6 inches on a hard service covered by a paper towel. Don't let it land on lens of course. You can remove the mem card. It has 13Meg of internal. ... Panasonic Lumix DMC-TZ3 Digital Camera

Hi I have a Samsung L100 Digital camera. I was using it last night to make a movie, I finished the movie and than viewed the movie when I was done. I pressed the button to turn the camera off, well the lens stayed out and didn't retract and now when I try to turn the camera on the blue light comes on and than it beeps 3 times and turns off. I've checked the battery life and its full, right now I have it charging to see if anything changes >.> but I don't think it will. If you have any input it w


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Samsung L100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2751 seconds