Having problems with your Canon EOS Rebel XSi Digital Camera ?

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


Answers :

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to have it repaired to operate again
CLICK HERE for the Owners manual in PDF format.
\015\012
\015\012It is over 13MB, so give it some time to download.
\015\012
\015\012There is a reset to factory settings option starting on page 114.
\015\012
\015\012Hope this is helpful to you.
\015\012
\015\012Thanks!!
Repair Help & Product Troubleshooting for Canon EOS Rebel XSi Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I am trying to download my pictures from my Canon IXUS 860. I have installed and updated the Canon software and it used to work. Now the Camera Window software will not start if I try and start it either automatically (when connecting the USB cable) or manually via the start menu. I have windows XP. There are no relevant messages in the event log.


Avoid the hassles and use a card reader to download your pics.\012 ... Canon PowerShot SD500 / IXUS 700 Digital Camera

I own a CANON EOS REBEL T1i EOS 500D. I used it in perfect order last saturday, went to use it yesterday afternoon and i have nothing viewing on the LCD. The camera still takes photos fine. Just nothing comes up on the screen, not the menu or settings nothing. It just a black screen. Spent many hours going through the manual last night and i cant find anything relating. Im thinking i may have to send it in to get fixed just thought i would check on here first. Thankyou!


Hi there, have you pressed the DISP button (see red line above) or REVIEW button (blue line) yet??if there`s still nothing appear on the L ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Canon EOS 350D LCD Does't show Pictures, and can not take pictures. It does not work with CF card or without. all other camera functions work and the lcdd works for all menu functions. Things I tried I tried removing battery. Updating the firmware.


Sounds like a faulty CF card, or it's not been placed in the camera correctly. ... Canon Rebel XT / EOS 350D Digital Camera

Dear fixya i have camera canon EOS 1000D not recognized with PC i installed driver included with my camera but still problem with pc the firmware Ver for my camera is: 3.7.6 this firmware not available update in canon wepsite pls i wanna looking for solution for this problem my email : [email protected] best regards


If all you want to do is download the pictures, you can easily accomplish this with a separate card reader. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Hi.I have a Canon Powershot S5 IS.When I turn on the camera, the little display seems not to focus and when I open the big display, there appears a black screen.I restored the factory settings and the big display is working fine, but the little display has the same problems.I think that a firmware update would be perfect, but I didn't find any update on Canon website.What can I do?


... Canon PowerShot S5 IS Digital Camera

I have a canon 40d SLR on Tuesday this week I updated the Firmware to 1.0.8 from 1.0.5 with no problems.but now find that when I review a picture on the LCD no problem,When I zoom in on the LCD screen no Problem but when I zoom out again this switches the LCD off. this was not a problem until I updated the Firmware can u Help Derek Pedder,[email protected]


Put all camera funtions back to factory defaults ... Canon Digital Cameras

Cannot update firmware


I am sorry to report that you have no other option than to send it to Canon for reprogramming. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Shutter speed I have had m590 kodak camera a year and love it but i need help with the shutter speed i have been through all the settings i can find in the menu , and yes read the owners manual but i cant find a way to set the shutter speed. The shutter is so slow i cant take any pictures where someone moves, and i cant take any pics of sporting events,waterfalls etc.Does anyone have a suggestion?


... Kodak M590 Digital Camera

Canon powershot s40 software support have tried downloading from Canon but this camera is from the U.K. I think it was formatted for Macintosh. How do i re format been doing what Canons manual vaguelly says. no luck. still cant get right drivers software for XP. HELPPPPPPPP


Here is all they got:http://software.canon-europe.com/products/0000573.asphttp://www.usa.canon.com/consumer/controller?act=SiteSearchResultsAct&functionid=1&fcategoryid=113&modelid=&keycode=&startIndex=1&am ... Digital Cameras

Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!


First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras

Canon A3100 IS firmware update - Canon PowerShot A3100 IS Digital Camera


... Canon PowerShot A3100 IS Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Bought my lumix in japan and now i cant find an english menu. Is there any way around this? Is there a firmware available? How the ehcl will tourists take advantage if buying gadgets if the menu comes in japanese only. Please help


... Panasonic Lumix DMC-FZ28 Digital Camera

Hi, how to setup time delay on canon power shot A410, i can find it in menu, but i cant go on it with my cursor, it is just going over this place and I cant click it.Can you give me some some advice how to do it, please? thank you


I Take it you don't have the instructions, if so you need a copy, you can download for free from:-\015\012\015\012http://www.canon.co.uk/Support/index.asp\015\0 ... Canon PowerShot A410 Digital Camera

I can't upload my photos from my Canon SD450. I have been looking at the manual and trying to follow what it says but when i turn it to the Play menu the screen goes black. It won't allow me to see the menu and the transfer order which I think I need to transfer the photos to my computer. Please help!


Buy an inexpensive card reader to download your pics to a folder you create on your desktop. ... Canon Powershot SD450 / IXUS 55 Digital Camera

Firmware update for canon - Canon EOS 450D Digital Camera


Http://software.canon-europe.com/products/0010610.asp\015\012Here you go.Enter your information-OS,Language and you will get the latest and grea ... Canon EOS 450D Digital Camera

CANON 40D. Had Flash Error code 05. Powered down for 12 hours. Camera now gives message "Busy" when shutter trigger button depressed. Flash works manually and antennae pops-up , Flashes works manually. Have no access to any other control or menu. Both memory card and battery have been taken out and replaced several times.


Pop up flash locking mechanism needs adjustment or to be replaced . You\015\012might be able to do this yourself but the top cover has to come off\015\012completely ( the mechanism I am talking about is on the inside of the\015\012top cover and is no ... Canon Rebel XT / EOS 350D Digital Camera

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef


Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

CANON A720IS How do I access DIGITAL zoom on the menu. Dimmly shows as a menu option but paging down skips the selection. Currently shows [OFF] ALSO My manual recommends formatting a new SD card. Is that necessary?


Let me get this straight---You want to charge ME $9.95 to answer my question---but you want ME to post the solution FREE????? ... Canon Digital Cameras

After I downloaded the firmware update I pressed the menu button as I turned it on it never started the actual update. after 20 minutes I then restarted the camera to see the hollow battery flashing on the top of the camera. Can anyone suggest a solution.


... Pentax Digital Cameras

I have a canon AE-1 program camera and i am looking for a owners manual so i can learn all the settings. It was given to me by a close friend he had two of them but he cant find the manuals for them. if at all possible i would like to get one. thanks for your attention to this matter barb


This website has two manuals for the Canon AE-1 camera. I'm not sure about the word "program" in your question. The manuals are in PDF format, and you just need to right-click on the links to "Save Target As," or left-click on them to open and then s ... Canon Digital Cameras

My husband has a Canon DS6014. I would like the screen on the back of the camera to show what the lens is looking at as I am taking pictures (as opposed to looking through the viewfinder). Right now, the screen remains dark unless I am reviewing pictures, or am in the menu. I've looked through the menu options and cant seem to find way to make it happen. Can you help?


... Digital Cameras

UPDATE FIRMWARE CANON POWERSHOT sx30is - Canon PowerShot SX30 IS Digital Camera


... Canon PowerShot SX30 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2948 seconds