Having problems with your Canon EOS Rebel XSi Digital Camera ?

Hi when I use the creative settings I push the shutter realese button the camera clicks but does not tak the picture until I realesa the button and press it again. Is ths a setting I need to change or is it a fault in the camera . Regards Jim


Answers :

No fault of the camera it's has been programed in custom function #9 for mirror lock up. In mirror kock up mode first click of the shutter button locks up the mirror the second takes the shot and lowers the mirror. Mirror lock up is most often used while tripod mounted for extreme close ups or macro photography and also where a large telephoto lens is used. Mirror lock up is for reducing camera vibration during exposure. You can go into your custom function menu scroll to #9 and turn this off and all will return to normal.
Repair Help & Product Troubleshooting for Canon EOS Rebel XSi Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi when I use the creative settings I push the shutter realese button the camera clicks but does not tak the picture until I realesa the button and press it again. Is ths a setting I need to change or is it a fault in the camera . Regards Jim


No fault of the camera it's has been programed in custom function #9 for mirror lock up. In mirror kock up mode first click of the shutter button locks up the mirror the second takes the shot and lowers the mirror. Mirror lock up is most often used w ... Canon EOS Rebel XSi Digital Camera

White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.


\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera

I bought the camera in the UK but I have since moved to Portugal and have only now had a chance to get the new camera out. This, I know, is my fault. But, nevertheless, I can't get it to work - the LCD monitor remains black when shooting whatever I do. It will take pictures via the optical viewfinder okay but I cannot get the screen to show. It works to display the settings etc but not for taking pictures so that when I press the display button it alternates between the photo settings (which


Canon models oddly do not support images on the LCD in every picture mode. Since the LCD works for settings, my guess is its in the wrong mode for the live view and its is not an issue with the camera's LCD.\015\012\015\012Here is a link to the ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Hi Experts, I bought an Olympus C170 camera 6 years before. It was good... recently due to some problem Technicians changed Lens in my camera.. Now the problem is I feel some delay time while I am shooting.. I am not able to grab the scene which I suppose to take. Once I pressed click button.. it takes some time to get flash/photo. Please clarify what would be the reason... Is there any setting needs to be done in my camera .. or its a camera issue.


When taking a picture, you must press the shutter button half-way and allow the camera to lock in the focus (it will beep) and then press the rest of the way when the moment is right for an instant picture. Is that what you do? ... Olympus Camedia D-425 / C-170 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

Shutter button hello, The camera turns on fine, I can view old pictures on it, change all settings...but when I press the shutter button to take a new photo, nothing happens. It doesn't try to focus or anything. It's as if the button is broken. Please help!!


See this link. ... Canon PowerShot A60 Digital Camera

When shooting with the D70 I get bright pink, yellow, and green in the bright areas. So far I have: -changed CF Card -changed battery -presses reset camera button -reset custom menu -checked hue and saturation settings


There may be some dust particles on your low pass filter .To check this have a fully charged battery in your camera .switch on the mirror lock up to on from the menu exit menu and press the shutter now remove the lens and inspect and blow any dust on ... Nikon Digital Cameras

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef


Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

When I follow instructions to set the camera in manual mode and change the shutter speed, there is no response in the display panel when I press the shift buttons. It is at 125 and won't move. If I'm not doing anything wrong and a problem with the camera, can it be fixed?


I have already posted the solution to your previous post herehttp://www.fixya.com/support/t4116221-when_am_in_manualI have also posted a link to the ma ... Digital Cameras

Coolpix s8000 digital camera: Unable to get red-eye button whn pressing flash mode as per page 31, only 2 options i.e. flash auto and no flash. ISO - unable to change the iso function. Set at manual. Also, unable to change to black and white option. Please help. [email protected]


Dear Friend,\015\012\015\012All the functions are not available on each and every mode. So first ensure that you have selected right function and compatible mode.... but from your question it seems that your cam is not acting as per manual... T ... Nikon Digital Cameras

My Canon SX120 IS digital camera won't turn on. I used it in the morning, set it down on a table, cam back and it wouldn't work. There is no damage. When I press the power button it does NOTHING. Is there a reset button or something? Changing batteries didn't help.


If you're after a reset button there might be a little hole you can insert a pin into to reset it, look around the camera.You should also try holding down the power button for a few seconds, it might have a function where doing that does ... Canon Digital Cameras

Dear Experts: I got the 850SW over a year ago, I only used it less than 10 times around pool or water park. I never immersed the cemera in water though, I doubt it was really waterproof like they claimed. Three weeks ago, my friend borrowed it for snorkeling in Hawaii for a couple of minutes. then the camera couldn't be turned on: every time I pressed the power button, it kept on beeping a few times then went off. If I pre-set to picture review, the camera is normal, just when I change to shooti


Could be a lens problem. Try some of these:\012\012Fixing a Lens Error on a Digital Camera\012\012Thi ... Olympus Stylus 850SW Digital Camera

Shutter release I just purchased this camera and while I was taking a photo indoors I pressed the upflash button and eversince then every single button I press on the camera (including the off switch) sets off the shutter release. In addition to this problem I can no longer see though the view finder unless I am pressing the shutter release button and then I can momentarily see through the viewfinder. I have noticed that if I press the shutter release button, it does not allow autofocus and it a


Take it back to the shop ... Pentax *ist DS Digital Camera

HI! the flash of my canon sx130 stops working. I tried pressing the flash button but it would not change to the "flash on" mode, the icon always says that the flash is off. I tried different camera setting but still not working. Thanks!


... Canon PowerShot SX130 IS Digital Camera

Shutter When I press the shutter button and it takes the camera the screen goes black and stays then you hear a click and it will pop back up. Is there a setting I need to change?


Hi:\015\012Try this:\015\012Go to the menu and or setup menu. RESET ALL.\015\012See if the camera works right,\015\012If not, set the menu like you may choose, then test.\015\012\015\012If all fails, then there may ... Vivitar ViviCam 5100 Digital Camera

Have new Nikon D80 camera which was working OK, but now monitor only works in playback. Have I incorrectly pressed a button or changed a setting to cause this? If yes how can it be restored Many thanks for any help. Terry O'Keefe


Heres how to reset itRESET\015\012 Find the two buttons with green dots next to them on the top right of the D80 ... Digital Cameras

D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim


Return the control panel in order back to normal. ... Nikon D40x Digital Camera

I often miss a shot because there seems to be a delay when I press the shutter button on my Fuji FinePix A350 digital camera. Is there a setting I can change to speed up the process?


It's called "shutter lag"...a common problem with all point and shoot cameras. To avoid it, press the shutter button half-way and allow the camera to lock in the focus (it will beep) before pressing the rest of the way. ... Fuji FinePix A350 Digital Camera

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?


Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap


Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

After taking some pictures I wanted to delete them. Instead of hitting the MENU button I hit the SET button and a red light came on and was flashing. I pushed on the OFF button to shut the camera off. It would not shut off.So to shut the camera off I opened the battery door and the camera shut off. I went to turn the camera on and will not come on. I changed batteries still will not turn on. WHAT DO I DO??...JERRY


Hello Jerry, First make 100% certain that the battery is charged, also that you dont have a bad connection.The S2 has a small cell battery for storing the date/time ect under the battery flap, try removing and re-inserting it, but ... Canon PowerShot S2 IS Digital Camera

Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A


Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera

I have a sony cyber shot 6.0 mega pixels. Dsc-S600 camera. when i press the power button it lights up and the lens half comes out, but wont let me take pictures. When i press the power button to turn the camera off it doesn't do anything. I have changed the batteries but still does the same. How much will it cost to get fixed?


ACCESS ... Sony Cyber-shot DSC-S600 Digital Camera

Lost functionality Camera is about a year old. Suddenly, zoom doesn't work, Set button doesn't work and Display button doesn't work. Other than that, it takes pics and displays them. But without the Set button, I can't change settings. Any ideas?


I have the same problem.. happened after leaving it uncharged for more then a year. I think its a software problem.\015\012someone know how to do hard reset/reboot? ... Casio Exilim EX-Z750 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5020 seconds