Having problems with your Canon IXUS 860 IS Digital Camera ?

My canon Ixus 860 has terrible trouble taking pictures in the dark, it seems like there is no flash, do I need to change the settings, I have fiddled with them, but to no avail?


Answers :

It happens with IXUS160 and IXUS170 that it is impossible to force flash (only auto or no flash is allowed) so it is impossible have good photos again light or inside. I recommend to give vendor back the camera and buy a no CANON ixus one but any other
I do not have the camera but I know it has flash you need to go on the internet and try find the button!
Repair Help & Product Troubleshooting for Canon IXUS 860 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon Ixus 860 has terrible trouble taking pictures in the dark, it seems like there is no flash, do I need to change the settings, I have fiddled with them, but to no avail?


It happens with IXUS160 and IXUS170 that it is impossible to force flash (only auto or no flash is allowed) so it is impossible have good photos again light or inside. I recommend to give vendor back the camera and buy a no CANON ixus one but any oth ... Canon IXUS 860 IS Digital Camera

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.


There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Bright pictures I have had my Sony Cyber Shot (DSC-S650) for about 6 mo. I have tried all different settings for the flash but almost all of my pictures come out with the person very white and bright. The pictures are fine if taken outside in natural light but anything other than that and my pictures are very white and bright. I have even tried to turn the flash all the way down on the manual setting. This is the third Sony Cybershot camera that I have owned and have never needed to change any o


Hey JAKI-LYNN,\015\012 I would reset the camera to the factory default settings in case something got set wrong. You can reset the camera in the setup menu and it is called initializing the camera. I would then set th ... Sony Cybershot S650 Digital Camera

Hi, I have just bought the Panasonic FZ45 and seem to have a problem with the flash. It will not pop up automatically when in "IA" mode. The display actually shows the symbol indicating that the flash is forced off. Have tried to change this using the REC set up menu but to no avail (incidentally the option to force the flash off appears in the user manual, but not on the REC menu). I have searched some of the forums on the web and it has been suggested that the FZ45 does not have an auto fla


... Digital Cameras

My sb600 has stopped flashing for no reason. Changed the batteries and it still didn't work. Tried to trouble shoot to no avail. The next morning I tried it again and it worked like a charm - then tonight it stopped again. All settings haven't been changed.


I would suggest to bring your cam to the service center it is a technical error not a DIY problem.. ... Digital Cameras

Pop-up flash I cannot get the pop-up flash to stow. I am almost positive it is simply a setting that I need to change.


Go to the menu RESET ALL may work. Then go back to the menu and set the settings to the way you want them, test the camera and see if the flash works.Make sure that the flash settings are on and not turned off in the menu settings.I ... Nikon Coolpix 5700 Digital Camera

I have a Sony Cyber-shot DSC-W90. When I try to change the flash settings, a notification pops up on the screen saying, "Flash settings cannot be changed." I tried setting it in each mode (including Auto) and trying to change the flash from there, but it won't let me. How do you unlock the flash settings? Thank you.


Go to Menu/ Home and initialize camera to reset it for factory default settings to fix flash light settings bug.If problem still not solved, let me know do you see any error code flashing in top right corner of lcd? ... Sony Cyber-shot DSC-W90 Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera

I NEED TO CHANGE MY FLASH SETTINGS. SOME ONE HELP ME PLEASE.


Its all on page 49 of your user manual, if you haven't got one you can download a copy from\015\012\015\012\015\012 ... Sony Cyber-shot DSC-W200 Digital Camera

I can only get my FL-50 flash to go into manual or auto mode, I am wanting to put it into TTL mode but don't know how to do this. I have just changed my E-3 body and wondered if there is a setting I need to have it in in order for the TTL mode to work?


... Digital Cameras

I was given an old sony fd200 digital camera (that takes the old floppy discs!) to use momentarily until I get a new camera - BUT it doesn't have a manual. I used it years ago but its been awhile. There are just a couple basic questions still - #1 The photo size is set for around 1250 and I think I need it smaller to put photos onto ebay - so how do I go in and change the photo size to smaller? #2 I feel stupid but how do I turn off the flash when I want to? I messed around with the came


... Sony Mavica MVC-FD200 Digital Camera

BATTERY DISCHARGE I have an Olympus FE 210 Digital Camera and had been using the same for over 3 months. Recently I observed a problem in the same. When I put the camera on, I can browse on the LCD screen and can see the snaps available in the memory. However, when I try to click a new snap, before the flash could pick up, the LCD screen trurns blue and starts showing the signal "BATTERY EMPTY". I changed many sets of new batteries but the problem continues. I am not able to use the camera for c


This is the worst camera I have ever owned. There is nothing wrong with your batteries. The Battery Empty sign lights up even when I know they are full. It happens all the time with mine. I believe it to be the contacts in the battery compartment. Wh ... Olympus FE-210 Digital Camera

Outdoor photos I have a casio camera. the inside (flash) photos are good but the outdoor pics all have a blue tint. I probably need to change a setting but haven't a clue what to do. Please help,.


The settings, according to what you've said, might be the problem. You didn't say how new the camera was or if its been damaged before, so if that is the problem, i can't help. However, it sounds like your white balance may be preset to flash mode. M ... Casio Digital Cameras

My Cannon Powershot A1000 IS does not review pictures, zoom in, or register that I try to change the menu settings (or the flash, macro, ISO, or display setttings). My husband was taking video near the ocean and some of the water got onto the camera. There was only a little on the surface - just enough to warrant needing to be dried off with a towel. What can I do to get the camera working properly again?


ISO buttons or zoom on power shot A1000 IS image stabilizer camera just stop working Help!!! ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

Flash comes on all the time. Day shots are just white!! is this a fault or just a setting that needs changing?


Possible that the CCD , charge coupled device, the imager of the camera is faulty. If by nay chance you have exposed the camera to high intensity lights the probability is high.\012I dont think any settings can sett this right but a replacement ... Canon Digital Cameras

Flash problems Sony DSC-H9 My flash will not go off and when I try to change the flash setting it says FLASH SETTING CANNOT BE CHANGED


As you haven't said which shooting mode the problem occurs under (e.g. Auto, Scene etc) I can only suggest that you try different shooting modes to gain access to changing the Flash settings. Hope this helps. ... Sony Cyber-shot DSC-H9 Digital Camera

I have a Panasonic DMC-TZ1 that I can't get the flash to go off on. The only flash setting that works on my camera is no flash setting and the icon for the no flash symbol appears white. The rest of the settings such as automatic flash with red-eye, and automatic flash, ect... are red. Is this a settings issues or a repair issue? If it is a repair issue could you tell me what on the camera needs to be repaired. Weather it be the LED light is broken or a resistor or transistor on the circuit


... Digital Cameras

Sony Cybershot DSC-H7 - can not change flash settings


For anyone who wants to know how i solved my problem with the flash saying it cannot be changed...\015\012\015\012If you go into the c ... Sony Cyber-Shot DSC-H1 Digital Camera

SONY DSC-H50 WON'T LET ME CHANGE FLASH SETTINGS ON AUTO ADJ SETTI


Select upper jog dial on Auto (green mark) and have flash options.you maybe changing desired selections which are preset on that particular selection.let me know what selections you want to change on what settings? ... Sony Digital Cameras

When I try to change my flash setting, I get a "Flash settings cannot be changed" message on the screen. It doesn't matter what setting I've selected, it does it for all.


Some modes don't permit flash changes...try a different mode to see if the problem is still there. ... Sony Cyber-shot DSC-H9 Digital Camera

Flash is not working in my DSC-S930 steady shot camera. if i try to change flash settings. message appears on screen: Flash settings cannot be changed


... Sony DSC-S930 Digital Camera

Trying to change flash settings but says 'flash settings cannot be changed' with a warning triangle. I am in the 'Green Camera' setting on the dial on top


Hello. I have a solution for you. You have your camera set to "burst" mode, which does not use flash. Reset it to "single" mode and you will be able to change the flash settings. Regards, Joe. PS Please rate my answer. Thanks. ... Sony Cybershot DSC-H3 Digital Camera

Flash unit will not open or work in any mode except "easy". If you try to change flash setting with control button, you get message that "flash settings cannot be changed"


You may have accidentally hit the BRK button next to the shot button. this turns on bracketing and locks out flash changes. Hit this button again to turn off bracketing ... Sony Cyber-shot DSC-H50 Digital Camera

When I fit the radio transmitter module from a set of Jianisi PT-04TM wireless flash slaves to the FZ50 it will no longer select all settings of apeture and speed. With the camera on manual setting the apeture freezes on f4 and the fastest speed available is 1/250. radio transmitter wasn't allowing flash to open fully, as it projected out over flash popup. I tried fitting an extension to mount radio transmitter higher and allow flash to open fully but still the same problem Fitting a normal


I've looked through the PDF manual for this camera and found the flash system pretty well full auto with the built in flash here is the manual link I used it's the fifth one from the top.http://www.google.ca/#hl=en&biw=1303&bih=818&q=pana ... Panasonic Lumix DMC-FZ50K Digital Camera

I HAVE A NIKON SB-800 FLASH UNIT AND I WAS TAKING PHOTOS OF RACECARS AND SOMEONE ELSE THERE HAD FLASH UNITS SET UP ON BOTH SIDES OF THE RACE TRACK WITH REMOTES, AND NOW MY FLASH WONT LIGHT UP AND THE SCREEN READS MRPT A RPT AND UNDER THAT IS BRPT CRPT AND OVER TO THE RIGHT SIDE IT READS CH4 STBY 80 AND BELOW IS F11 XM ZOOM 14MM WHAT DO I NEED TO DO TO CANCEL THIS SETTING AND GET BACK TO MY REGULAR SETTING AND HAVE


Hey ljthomp6_30,\015\012 I would just reset the flash back to the manufacturers default setting, which is done by pressing the mode button and the on/off button simultaneously for about 2 seconds. Keep in mind this wi ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2398 seconds