Having problems with your Canon IXUS 960 IS Digital Camera ?

My camera lens can not come back when the switch


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon IXUS 960 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My samsung camera lens wont come out it seems to be stuck. when i switch the camera on it just beeps and switches back off, you can see the lens trying to come out but then it beeps and switches back off. What is wrong with it?


Try these procedures. ... Samsung Digimax L60 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

Power problem I was charging camera using 4.5 DC volt socket on Camera, next I switch on camera so Lens head came out, accidentally power pin came off from camera and lens will not go back. Now nothing happening to camera when power cord connected or with battery, camera will not switch on at all including power lite does not come on with power cord connected. Look like it may have blown fuse in camera or something else serious. Any solution which I can try? I'm a very handy man with good too


I sounds like coincidently something in the camera failed. I doubt very much that simply pulling the power from the camera would cause damage. \015\012\015\012In anycase, if you were to open the camera, you would see that all the circuit ... Olympus FE-220 Digital Camera

My samsung camera lens seems to be stuck in when switch the camera on it just beeps then switches back off, but you can see the lens trying to come out slighty then just going completly back in, does anybody know how to sort this problem?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Digital Cameras

Camera my lens is out and when i switch camera on it comes up on the screen lens error and switches itself back off before i can do anything


Use your thumbs and gently yet firmly push the lens assembly back into the camera until you hear a confirmation "click" ... Kodak Easyshare M753 Digital Camera

Hi, I've never had any problems transferring photos to my laptop until now. Suddenly, nothing is happening. I switch the camera off, connect it up, switch it back on again and the 'on' light comes on but the lens doesn't come out and the laptop doesn't seem to acknowledge the camera is there. Can anyone help?


Maybe you should update or reinstall the software? Does your camera act like it's connected (like black screen, special light, no access to menus, etc. etc.)? Check if there's a problem with your cable. ... Nikon Coolpix S550 Digital Camera

At switch on, the camera comes on, lens comes out, and then immediately goes back in and camera switches off. Battery fully charged. Works fine when in the mode where you connect to a PC.


It could be something more serious, or as simple as inserting\015\012fresh/fully charged batteries, but the problem you describe is frequently due to\015\012corroded battery contacts inside the camera. Remove the batteries and\015\012wipe the camera ... Kodak EasyShare M863 Digital Camera

Power problem My camera is dead even though it has a fully charged battery inside. You slide the cover back and nothing happens. We tried a different fully charged battery and still nothing. Any ideas? Have the Canon Powershot S30 since many years (some 6000 photos taken) but suddenly the camera is absolutely dead. The lens won't come out when sliding the lens door back, no pictures shown at the monitor when switching the viewing button to the right, no USB connection when connectiong to a P


I have the same camera with the same problem. I have tried the suggested solutions with no result. Any other ideas? ... Canon PowerShot S30 Digital Camera

Kodak DX4900 My camera switches on it lets me format the card or look at photos ,but when i go to switch the camera to shoot mode the lens come out and then goes back in again and switches off. The batteries are the correct one and i have tried new batteries in in as well as i thought at firtst it was dead batteries. ANY SUGGESTIONS?? as usual the camera is out of warranty Thanks


Try to remove the memory card first and turn it on without memory card, it has a built in memory by the way. if it works, throw away the memory card, If the problem is still there, try to shake it side by side. If it still dont works, it needs to be ... Kodak EasyShare DX4900 Zoom Digital Camera

Good-day I like to find out, please why is my Camera M863 lens is not going in anymore, trying to switch on the camera the lens goes in and come out back and the camera wouldn't work. thanks so much i will be so glad to receive solutions to this. thanks.


Hi there first of all I like to say its a common problem. Its happens when the lens guide pin damage or dislocate. Another general reason is scratch or dust on the Lens barrel or body. So please follow the steps below and let me know the result.\012 ... Kodak EasyShare M863 Digital Camera

Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth


TIPS:1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!..to fix this... ... Olympus FE-230 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

Hi i have a tamron 24-135 sp lens for cannon eos fit and it has developed a fault.when i switch the camera on it gives a 99 error,yet if i extend the lens to the 135 mm position everything is ok,i can then go to 24mm setting still ok,if i turn the camera off and on again back comes the fault.any thoughts? also i dont seem to find any tamron uk support contacts. regards phil langham


... Digital Cameras

Accidentally I dropped my Sony DSC S500 camera. Now the shutter is jammed. When i switch on, the lens ejects out and stops half way. While switching off, the lens doesn't come back to normal position, instead it stops in half way ejected position. From the LED display i could see a blurred image. I am able to see all the photos that i have taken so far, but am not able to take any new photos.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Sony Cyber-Shot DSC-S50 Digital Camera

I mistakenly dropped my digital camera a few inches when the lens was out.When i tried putting it off to know if the lens would go back in,it didnt move so i forcefully pushed it back inside.Now, when i try putting it on ,the green light flashes,then goes off and the lens attempts to come out but its like its stuck or something pulls it back inside.from what i noticed the camera cant come on without the lens coming out.pls i really dnt know what to do


You've likely jammed the zoom motor in the lens. You're correct in thinking that the camera can't work without the lens out. With it being physical damage repairs wouldn't be covered under warranty so you either need to pay to have it repaired (if th ... Digital Cameras

Lens I dropped my ixus 40 camera, and now the lens won't close. I turn it on and an error 18 comes up. The lens attempts to close back up when I switch it on but seems to be stuck... Should I send it away to be repaired? If so, can you recommend a repair shop?


Hi Meaghan,\015\012\015\012If it was me (and this did happen to my camera as well) I would take it to a camera shop. For about $50.00 they can put the lens back on track, and clean it as well. This is a great camera, and I would not risk taking it ap ... Canon PowerShot SD300 / IXUS 40 Digital Camera

When I turn the camera on the lens extends, the camera beeps several times, the lens comes back in, then the lens extends again, the camera beeps then it shuts off without having the lens come back in.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Camedia C-740 Ultra Zoom Digital Camera

When switched on, the len's start's to come out but then goes back and switches off. Had camera from new 3 to 4 year's.


Hi there, I suggest you replace your battery. Because after charging it will showing full but it is not real. Because you using in last 3 - 4 years and thats why the life of battery is finished. If you changed the battery already then remove the memo ... Sony Cyber-shot DSC-H2 Digital Camera

I have a sony camera DSC w30, when I switch it on, the lens comes out and goes back in, this happens twice and than a message pops up to restart the camera and same thing happens again


This is problem of lens mechanism and complete lens assembly will be replaced to correct this error.Please check with local camera repair shop for lens assembly replacement. ... Sony Digital Cameras

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help


You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Lens Error When I turn on the camera in any mode except play back, the lens will come out as if it's coming on but then the lens' go back in and the camera shuts down. The batteries are fully charged and the camera has not been damaged in any way.


I am sorry to say but you have a physical issue with the camera. Your either going to have to take the camera apart yourself or bring it in for service. Try working with their support \015\012\011\011\011\011\011\015\012\011\011\0 ... General Electric A835 Digital Camera

Dropped camera Camera dropped while lens was out. Lens was knocked crooked. My son attempted to push the lens back to center it and we heard a piece on the right side click or break. Now the lens wobbles, but retracts. However, the lens comes out halfway between wide and telephoto, have to move it back and forth, or shut off and sometimes it comes out to wide. Pictures are still great. Ask Kodak for help and they wanted me to send it to them and then give me a certificate to take 15% off a new c


Lens won't come out and lens cover won't open. New battery what do you do to make it work? ... Kodak EasyShare CX7430 Digital Camera

Toshiba PDR-M700 When I power up the camera, the lens will not come out and sometimes will come out all the way to maximum zoom. When I power off with the lens out, it clicks as if something is stripped or loose. After shut down, I can push the lens back in. Once in a while the camera will work but eventually the "Lens Error" message comes up. This was a good expensive camera when I bought it but taking it in for service would probably cost more than the price of a new camera today. Can you sugg


It sounds as though the drive gear is slipping... If you give up on trying to repair your camera I may want to purchase it for parts (my sister-in-law broke my LCD display)[email protected] ... Toshiba PDR-M700 Digital Camera

Lens error my canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera?? i'm currently overseas and although my camera is within warranty, i cant possibly send my camera back to the original country for repair. is there any DIY method?? i'm an amateur at cameras so i do not wish to try any method that may further make the problem worse. thank you for your h


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon IXUS V2 Digital Camera

Hi welcomejee, I read all your solutions regarding the digital camera Sony DSC N2. I really have to thank you for your precious Some of the problems are very similar to mine: After the camera fell on the ground from about 2 meters in off mode the lens would come out and immediately back in 4 times in a row. After that the lens is back in, a beeping sound comes up and on the display it is written to "Turn the power off and on again". Of course that does not help at all. The lens is opening


George, this is most likely a lens issue, and more precisely, probably a stripped gear when it fell. You will have to disassemble the entire unit to get at the lens assembly, and will probably be a professional by the time you get through! ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4393 seconds