Having problems with your Canon IXUS 970 IS Digital Camera ?

Canon Ixus 97 Camera Window does not appear

\015 Canon Software installed as instructed Camera window sequence followed.Camera Window never appears\015

Answers :

Consider NOT connecting your camera to your computer.\012\012\012

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.
Repair Help & Product Troubleshooting for Canon IXUS 970 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can't download pictures from my Canon Ixus 80 IS camera via USB cable. It appears to connect but there is no software options in the window and only option is to cancel. I aslo notice that the little green light flashes on the camera and then the screen goes off. The other downloaded canon software also fails to recognise there is a camera attached. I can down load my pictures via the card reader.This was working up until the end of March but my software crashed with the camera still attached an


... Canon IXUS 80 IS Digital Camera

Canon Ixus 97 Camera Window does not appear


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon IXUS 970 IS Digital Camera

Canon has announced a problem with some of the CCDs used in its digital cameras and camcorders which causes images not to appear or appear distorted. This is due to a malfunction that means the wiring in the CCDs may come undone if exposed to high temperature or high humidity. The affected cameras are the PowerShot A60, PowerShot A70, PowerShot A75, PowerShot A300, PowerShot A310, Digital IXUS V3, Digital IXUS II, Digital IXUS IIs. Canon advises anyone experiencing these problems to contact them


Oh it's more than just the cameras you list, and also includes some video cameras.\015\012\015\012Canon will fix these for you for free if they're experiencing symptoms of CCD failure (black, lined, discolored, or distorted images). This ... Canon PowerShot A70 Digital Camera

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?


Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

I have a Canon Ixus 100is digital camera that I cannot connect to the PC. When the camera is connected and I choose a canon option, i.e. Zoombrowser EX 6.7.2, a box appears. The box heading is "CameraWindowDC.exe - .NET Framewoek Initialization error" and the message is "Unable to find a version of the runtime to run this application". Can you help? Regards David


Download and install Microsoft .NET Framework 3.5 -->start download.Then connect your camera and see the result. ... Digital Cameras

I am trying to download my pictures from my Canon IXUS 860. I have installed and updated the Canon software and it used to work. Now the Camera Window software will not start if I try and start it either automatically (when connecting the USB cable) or manually via the start menu. I have windows XP. There are no relevant messages in the event log.


Avoid the hassles and use a card reader to download your pics.\012 ... Canon PowerShot SD500 / IXUS 700 Digital Camera

I have a Canon Digital IXUS 11s camera which has been displaying lines across the screen and it would not photograph. I replaced the memory card with an old one and the camera worked perfectly well for about a dozen shots before it too displayed the lined screen. I reformatted the memory card and now the screen id solid grey. Other functions on the camera appear to be working well The unit is four or maybe five years old and I would find it hard to justify buyin a new camera. (could it just be m


Hi,Play the Recorder Video / Image. Do you see the same \015\012Symptoms?If yes, then you have Bad LCD Panel. You need to \015\012replace. The cost of repair might be high relevant to the Cost of the \015\012new one. ... Canon Digital Cameras

My camera is a Canon IXUS IS digital camera. Recently the pictures will appear in the screen to review but when downloaded to a computer will either not be able to open OR open with a film of green or red covering the picture. Then, sometimes the image on the camera screen will be smaller than it should even though the first review was perfect. A week later, the smaller one will be large until you try to view it after download. then it will remain large but be green or red. There is an enti


... Canon Digital Cameras

Canon ixus 09is Turn camera on - yellow light appears - camera makes noises like its ready to go - screen doesnt work and it takes a few goes to turn it off. Even when the lens eventually retracted and stayed shut the yellow light stays on and the camera got very hot


... Canon IXUS 90IS Digital Camera

When on camera E8 will appear - Canon PowerShot SD100 / IXUS II Digital Camera


Error Code E8 is due to a Motor and Sensor Issue within the Optical ... Canon PowerShot SD100 / IXUS II Digital Camera

The small sliding bar which operates the closure to the battery compartment on my Canon Ixus 750 Camera has popped out when I tried to open it to replace the battery. It is made of plastic and has two small hooks or lugs on the underside which appear to engage in two holes in the camera. I am having difficulty putting it back and am reluctant to force it in case I break one of the plastic hooks. What is the best way forward?


Hi,Try to close the lid without the battery, this we can check if the lock was still functioning or there was a problem on the mechanism on the lock..Let me knw ... Canon Digital Cameras

I have a canon eos rebel xsi 450D. i loaded the eos digital solutions disk on to my windows xp computer. it seemed to load fine. the memory card manager screen appeared on my computer.then a small EOS utility screen appeared and read " camera is not recognized" and would like me to click ok. please advise. my phone number is 617-795-2558. e-mail: [email protected]


Not a good idea to post your phone # and e-address on this or any other site.This question arrived on FixYa.Problem is the camera firmware isn't compatible with the software possible needs a Canon free update or purchase a car ... Canon EOS 450D EOS Rebel XSi Digital Camera with 1785mm and 70300mm lenses

E18 error I have a Canon Ixus II which is four years old. Today I switched it on, took a couple of pictures which appeared blurred on the screen. Deleted these pictures. Camera lens stayed out. Switched camera on and E18 showed on bottom left of screen.


The following outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/2007/ ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

Canon Sd700IS;Unable to download images. As soon as the window appears on my PC it will show no images on both the camera and PC.


If you installed the camera cd rom you should have no problem.It is normal not to see the pics on your camera while connected to the computer but you should be prompted to use a ge eric program do download the files like windows camera wizard.try to ... Canon Digital Cameras

Canon Ixus 80 Is digital camera. When I turn it on a bar code type lines appear in the LCD monitor.


... Digital Cameras

Need powershot s300 driver for windows vista - Canon PowerShot S300 / IXUS 300 Digital Camera


It is FAAAR better to use an external card-reader than using a wired-connection to a digital camera, i don't recommend using a direct-connection get a card-reader; it's more reliable, faster and should not need any driver. ... Canon PowerShot S300 / IXUS 300 Digital Camera

Cannot connect to windows 7 - Canon IXUS 80 IS Digital Camera


If you have not install the CD/ software that came with your camera it will not connect. So install the Camera CD first and let us know if this is helpful. ... Canon IXUS 80 IS Digital Camera

I can not turn on my Canon Digital IXUS 900Ti. It appears that the on/off switch is not functioning at all. I have re-charged my battery but still unable to turn on camera.


... Canon Digital SD900 / IXUS 900 Ti Digital Camera

We have a canon digital ixus 60 camera, I dropped it on the pavement and ever since, it takes photos that appear over exposed (very white) yet the video works perfectly still.


There are 2 possibilities, If you know how to open and fit camera, then open it, remove and reinsert flexible ribbon wires (mostly 2) in main board.If problem still exist, most likely aperture in Lens Mechanism is misaligned ... Digital Cameras

Can anyone tell me how to get the date to appear on my photos using a Canon Ixus 70 camera?


The date/time stamp only works in "Postcard" resolution. Press the "Func Set" button, then scroll down to the bottom to select postcard resolution. \015\012\015\012Then press the menu button. Select the "Camera" menu, then scroll down to ... Canon Digital Cameras

Display window has gone wacky - Canon PowerShot S410 / IXUS 430 Digital Camera


Based on your model camera, this might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warrant ... Canon PowerShot S410 / IXUS 430 Digital Camera

E24 code Hi all, when i turn my Canon Ixus 70 Digital Camera on i cannot take a picture as as an error message appears E24. I can look at photo's but not take them . Please help me !!! =)


Dont stick a pin in the wee hole at the front thinking its the restart button.\015\012it's the microphone... ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Hello, i have just bought a Canon ixus 80 IS camera but i'm having trouble instaling the sortware, i get abox appear saying my screen resolution isn't hight enough, i have tried it on all settings but nothing seems to help, how can i resolve it ?


Change your screen resolution in the windows display control panel. The ez way to get there is to right click your desktop anywhere and something about the display should appear. If changing the settings does not work, use a memory card and a ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3501 seconds