Having problems with your Canon IXUS V2 Digital Camera ?

How to remove lcd scren in canon sx 10 is and instal new, is broken


Answers :

Http://www.andyozment.com/guides/twisted_rotateable_canon_lcd might help, or you can always send it to Canon. The camera is less than a year old, your warranty might cover it.
Repair Help & Product Troubleshooting for Canon IXUS V2 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to remove lcd scren in canon sx 10 is and instal new, is broken


Http://www.andyozment.com/guides/twisted_rotateable_canon_lcd might help, or you can always send it to Canon. The camera is less than a year ... Canon IXUS V2 Digital Camera

The LCD screen of my canon g9 broke following a fall. I purchased a new one. I removed the back panel but can't see how to disconnect and connect the wiring strip or know how to remove the broken screen from the aluminium frame without bending or breaking it. Please advise


HelloHERE is a link on the screen replacement on a G7, they are pretty much the same. Just have a look at the pictures.If th ... Canon Digital Cameras

I bought a replacement LCD screen, but when I remove the back case, the connector for the LCD is *under* the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir fishiemnma, remove the broken LCD display lifting it up carefully of retention plate.You did not make? will you have access to the connector afterwards.Regards ... Nikon Coolpix S3000 Digital Camera

I bought a replacement LCD screen for my Nikon S3000 camera, but when I remove the back case, the connector for the LCD is under the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir, contact uscamera.com to obtain a repair manual.Regards ... Nikon Coolpix S3000 Digital Camera

I purcahsed a new canon SLR 7D and have an error message on the LCD screen E30. instructions says to remove battery pack or turn off the camera but it seems its not working at all. i have tried so many times but the error message keeps appearing on the LCD screen. What can I do?


According to Canon's Knowledge Base here, this error means that there is ... Canon Digital Cameras

My LCD screen in my Canon FS10 needs to be replaced. I have a new one but need to know how to remove the old one and replace it with the new one.


Hello. I noticed your request has been here for some time. I'm not familiar with your camera model and therefore can't give you good repair directions. I will tell you a very good way to learn about camera repair if you have an intrest. This may seem ... Digital Cameras

Availibility and price ?Canon Ixus 55 camera LCD display broken; mark on it SONY AM336BLAA


Perhaps you could Google it, there is a chance you may find it. ... Digital Cameras

I have removed the battery and CF card and re install battery. When I turn it on, it reads no CF card, however, when I insert card, it freezes, it does nothing. I just purchased a new CF card, but it continues to do the same. only thing that comes on is the EOS part. Please help. It is a Canon Rebel EOS 300. Thank you.


Hi there, You need to reformat the CF card first. 1. Put the CF card into the EOS DIGITAL REBEL camera, and turn on the Power Switch. 2. Press "MENU" \015\012 button and select the tools "Setup" menu. 3. Select \015\012 ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Have a Canon Prima Super 155, about 7 years old, that will no longer take pictures. A flashing "H" appears in the "Caption" windo, even with the camera turned off. The battery is fine (new one installed did not help) and I can not get the H removed and the shutter will not open when the shoot pic buttion is depressed. Any ideas on what to try? Thanks!


I have also the same problem.... I don´t know what to do! And want my camera back! :)\015\012\015\012 ... Canon Prima Super 155 35mm Rangfinder Camera

Fairly brand new (less than 6 months old) Canon rebel xti - shooting in manual mode, then it gives a low battery message. I switch the battery and nothing. I recharge the first battery and install it, again - nothing. I removed the internal battery and left both batteries out for 30 minutes. Nada. I have barely even used this camera and I am furious. Is there anyone who knows what the problem is? If I seriously have to send it back under warranty already after shooting less than 1000 photos, I a


If its brand new and with less than 7 monthsof usage, you have to send it back and make valid the warranty.\015\012\015\012Such symptoms indicate a malfunction o the DC/DC voltage converter circuitry, and the camera has two of them locate ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

I bought a used Canon EOS Rebel and was told there was a problem with it. I purchased a new battery and charger. I have installed a fully charged battery and I get nothing at all on the lcd screen, also nothing works.


What you have told is right then - why did you buy it?There is nothing for you to do- but to find a repairerI dont think there is much hope -as wth all small electronics they are not made to be repaired. ... Digital Cameras

Hi i have broken lcd creen in my a 500 canon , where may i find on line shop to buy a new one


If you do a Google search for 'digital camera parts' the first listing is a website that can help you. The LCD is $55 with shipping.\015\012\015\012The website name is: Darntoothysam com then search by your model number. Please check and ... Canon PowerShot S500 IXUS 500 Digital Camera

How to remove and install a lcd screen on a Canon SD870 Powershot digital camera


Hi. Here's the link on how to remove and replace the LCD. Please click here. ... Canon PowerShot SD870 IS Digital Camera

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes


I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Installation I have just purchased my new G6 and want to install the new version, however I have the Canon Zoombrowser Version 3.1 on my computer. When it asks do I want to install the new version it will uninstall the old version and all it's components. If I say yes, will I lose all my photos it will it automatically transfer all the pictures into the new version??


It is no problem to change the version of program. You will not loss your photos. Your photos are actualy on the diferent folders on your PC hard disk but not in the folder of ZoomBrouser - the program will not touch them. Go ahead. ;)\015\012Best Re ... Canon PowerShot G6 Digital Camera

AFTER iI REMOVED THE SOFTWARE CONVERTING RAW TO JPG I'M NOT ABLE TO RECOVER IT AFTER FOLLOWING INSTALATIONS ( The computer doesn't want to install full software and doesn't see my Canon camera after connection) I tried to remove all files connected to the word "Canon", but I thing there must be one hidden in computer's memory. What can I do ?


Make sure the software is compatible with your operating system. If you just upgraded to windows 7 you should also check that you have the most current version of the Canon ZoomBrowser. Canon support is: ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

New sd card will not allow me to select format. Wanting to install new SD card. Removed current 1GB card and installed new 4GB. Then went to format and it doesn't seem to reconize the new card. It states "Memoray card error" but I tried two new cards with same result. It sees the old card just fine. suggestions on how to format the new card or is it the camera.


This camera was manufactured before the SDHC protocol was developed for SD cards. A 'standard' SD card protocol is 2GB maximum, and that is what the camera is compatible with. I'm pretty sure the cards you are trying to use say SDHC on them, right? ... Canon PowerShot A520 Digital Camera

Install a new lcd screen in a olympus pen epl 1 camera


... Olympus PEN EPL1 Body only Digital Camera

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the


Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

I have a canon sd 750 have been using it for 4 months now, but yesterday the screen went black i can see the old picturs i took but cant take any new pictures all the new pictures i take are black the LCD is gone black the lense is moving but no image on the LCD i can see the menu and settings but no image from the lense


OK, SORRY I DIDN'T KNOW WHAT KIND OF MEMORY YOU HAD IN THE CAMERA. I WAS HOPING THAT WE MIGHT HAVE A SIMPLE PROBLEM FOR YOUR SAKE AND WE COULD GET YOUR CAMERA UP AND RUNNING FOR YOU AGAIN. NOW, IT SOUNDS LIKE YOU NEED A PROFESSIONAL TO TAKE A LOOK AT ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

My samsung digimax L70 lcd got broken and i need to get a new lcd for it. where could i find a new screen?


Hi,You could buy it from :-http://cgi.ebay.com/LCD-Screen-Display-Parts-Samsung-Digimax-L70-L-70-/280389738500?pt=Digital_Camera_AccessoriesGood Luck!!Thanks!! ... Samsung Digimax L70 Digital Camera

Broken LCD Does any one have idea how much is a replacement lcd for canon ixus 860IS? mine got broken. thanks.


We are a leading supplier for digital camera replacement including LCD screen. If you are still looking for it, pls don't hesitate to contact us and visit our website http://szaid ... Canon IXUS 860 IS Digital Camera

Black LCD Canon A60 Cute camera, many nice features. Installed a Lexar 256mb CF. Worked well until just past the warranty period. Now nada, just a black screen, or scrambled LCD. If you squeeze the shutter, wysiwyg--a black photo. Contacted Canon and essentially they offered me an "upgrade" to their A70 for $150 plus $10 for shipping. And a 3 month warranty. Any advice or do I have an expensive paperweight?


I have heard that there is a CCD sensor issue with a few selected models. Somtimes if you bang on the case this will help a connection problem in the camera and you will get some change in the image on the display. If this does happen then that is th ... Canon PowerShot A60 Digital Camera

Battery door. I have purchased a new battery cover to replace a broken one but cannot remove the pin to get the old door out and the new door in. I have remove the front and back covers but the pin won't slide out. Can you help, please. Peter


Hi Peter and I think there was someone else with a similar problem,\015\012I finally received the new cover today. I wasn't able to work out how to get the pin out but what I've done is separated the plastic part from the metal part by undoing ... Olympus FE-210 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2518 seconds