Having problems with your Canon Powershot A1000IS Digital Camera ?

Powershot a1000 get flashing low battery indicator and power off with brand new alkaline batteries after only a few pictures???? any suggestions. i already tried setting the auto file to on.


Answers :

Repair Help & Product Troubleshooting for Canon Powershot A1000IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Powershot a1000 get flashing low battery indicator and power off with brand new alkaline batteries after only a few pictures???? any suggestions. i already tried setting the auto file to on.


... Canon Powershot A1000IS Digital Camera

I bought a camera from a friend, Olympus e-420. but when i started to use it, i always got dark picture even the flash is already switched on. i'm thinking the built-in flash is delayed, do i have way to make it more accurate? i also noticed when i take pictures it always save's as ORF file. how can i change this settings to a different format? i already tried restoring the default settings but why can't i access the Custom Reset option on the menu bar?


There are multiple reazons for the picture to look dark, a very short exposure, or a low flash intensity.\015\012Try changing the flash intensity, this is done by pressing the Exposure compensation and flash button simultaneously.\015\012 ... Olympus E-420 Digital Camera

My built in flash won't fire in dark sceneries, it worked fine a coupl of hours ago. Every setting is in auto, Is it related to other setings? The camera works fine in bright areas except during the dark due to the flash freezing the shutter. Can I fix this with setting adjustments? I already tried using the master reset but it didn't work.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Nikon D60 Digital Camera

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks


This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

Last night was taking photos indoors with flash on auto setting. All appeared fine except thre was a vertical line on the viewfinder, not quite half way across. After about 4 flash photos, the flash turned itself off and it wouldn't allow me to adjust the settings back to flash again. I checked the setting and it was still on auto and there was plenty of battery left. Tried a couple of shots and they took, but no flash, so useless. Turned camera off for half an hour then tried again and it was f


I have similar issues. flash won't fire but pops up normally. cannot adjust flash setting that remains in always off position.\015\012\015\012help. ... Canon PowerShot SX 200 IS Digital Camera

I have a Sony Cyber-shot DSC-W90. When I try to change the flash settings, a notification pops up on the screen saying, "Flash settings cannot be changed." I tried setting it in each mode (including Auto) and trying to change the flash from there, but it won't let me. How do you unlock the flash settings? Thank you.


Go to Menu/ Home and initialize camera to reset it for factory default settings to fix flash light settings bug.If problem still not solved, let me know do you see any error code flashing in top right corner of lcd? ... Sony Cyber-shot DSC-W90 Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

Portrait's I own an Olympus E-500 and I am trying to take portraits. I tried two different settings 1. Auto 2. Portrait neither with good results. I used a backdrop and two strobe lights, both professional equipment. With this said I would like to play with Manual mode, to try to improve the quality of my pictures. I am in JPEG SHQ settings. I am asking for your suggestion in manual to improve the quality of my Portraits. Thank you for your assistance. Ron Hafer


Hello ... Olympus EVOLT E-500 Digital Camera

Olympus u795sw - when I use this camera it now puts a ''blue/green'' halo around the edge of trees on the sky line in fairly bright light. I have got the white balance set on auto, have tried changing the shutter settings to landscape, portrait/landscape, portrait, etc. Have tried the first 14 settings. All give the same problem. Any suggestions please - Mark [email protected]


Try cleaning the lens. Use an appropriate photographic lens cleaning cloth.I hope this helps. ... Digital Cameras

My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks


Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera

I have a panasonic lumix G2. Im only a beginner with a SLR camera so im a bit stuck. I have the Camera set on A but for some reason the screen & photo's are very dark. I have tried changing the apature & shutter speeds & also tried restring settings but nothing works. However if you return to the intelegent auto button it's perfect but defeats the whole reason that I brought the SLR in the first place. Please please help. Thanks. Julie Leach


Julie, you're asking for a course in DSLR photography. We don't have the space here for that. Where is your owner's manual? If you follow it carefully, it can answer all your questions. ... Panasonic Lumix DMC-LZ2 Digital Camera

I have a Samsung SL202 which I purchased because it was pretty much auto setting if I wanted. I liked the dial on the back to tell me what I was shooting. I'm not camera techie. I have been trying to get clear pictures of items to list on ebay. I have had a trombone and a suit jacket. I have tried most settings, different places in the house for light, etc., but they are never clear, the colors are not right, and the picture is too bright making the object look faded. I have then spent way too m


You may have changed settings such a ISO, exposure compensation, etc. which are now affecting your pictures. Go into the setup menu and find "reset" to get your camera back to the default settings. ... Samsung SL202 Digital Camera

I HAVE A NIKON D40X.I CANNOT GET THE BUILT IN FLASH TO WORK.IT IS IN AUTO MODE AND FLASH IS TURNED ON.IF I ATATCH AN EXTERIA FLASH IT FIRES EVERY TIME.I HAVE TRIED IT ON ALL THE OTHER MODES,IT DID FIRE ONCE,TRIED IT AGAIN ON SAME SETTING NO LUCK.IT POPS UP ON DEMAND BUT NO FLASH.I THINK I MAY HAVE DONE SOMETHING IN MENU SETTINGS TO MESS IT UP AS I AM NO COMPUTER EXPERT.CAN YOU HELP. GOT A WEDDING IN MEXICO IN 4 DAYS.DAUGHTER IS EXPECTING GOOD PHOTOS.


In Auto mode the flash will only fire when the camera thinks it needs it.Only in the PASM modes do you get to decide whether to use the flash or not. ... Nikon Digital Cameras

Nikon N75 Camera will not auto focus. All of the settings are set in "auto" right now. Tried as much as I can think of.


Hi there go and reset to factory settings through menu. You may of locked it. Try using it set to P\015\012It sounds like y`ou have locked the focus, Also have you got a button that says manual focus, and auto focus on the front of the camera. see th ... Nikon D50 Digital Camera

Canon Vixia HSF100 - I've successfully transferred video files in the past, and have just transferred photos from camera to computer without problem - but when I try to transfer video files I get the message -'can't find any files to transfer to the computer'. This happens repeatedly, I have already reinstalled the software. The removable disk shows approx 6gb of files, but the computer does not recognise them. Any suggestions?


Hi!I read your corresponding posts and it seems to me that the problem you have is related to the USB mode of the camera.Make sure that when you connect the camera to the computer, you set it to PC/PRINTER mode!If that fails t ... Digital Cameras

Fujipix s2950. What is the best setting for low light with movement. I have taken some photos of children dancing on a stage, they all turned out blurred. I tried the sr auto setting and the sport setting. Thanks.


... Fuji Digital Cameras

The flash has been working fine until last night when I tried to take a picture and the flash was set to auto. When I press the button the little red light beside the flash sign lights up, but the camera does not take the photo. When I set it to flash mode, it still won't take a photo. When I turn off the flash, then it does. What could be the problem? Is it in the settings?


If your batteries are weak, the flash will not have enough power to flash and will prevent a picture from being taken. ... Nikon Coolpix S210 Digital Camera

The flash does not work even if the flash setting is SET to FILL ( the flash will work every time the camera is in used) I already tried to reset the settings to default but still the flash wont work my camera is olympus FE 190


Does the camera indicate that the flash is turned on? In most olympus cameras I have seen there is a lightning blot at the lower left corner of the screen. Verify that it is indeed there and let me know. ... Olympus FE-170 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in


Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Zoom goes in and out a couple times when I turn it on and then it stops and the display is blurry. I try to auto focus and nothing happens... Auto focus is on and I've changed the auto focus settings and still nothing. What can I do to fix this?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Zoom goes in and out a couple times when I turn it on and then it stops and the display is blurry. I try to auto focus and nothing happens... Auto focus is on and I've changed the auto focus settings and still nothing. What can I do to fix this?


Your auto focus sensor is malfunctioned in saying this you going ot need repair this explains why the lens goes in and out like this its trying to focus but cannot find the point and this is cause by the auto fo ... Digital Cameras

The photos taken by my Coolpix s70 are consistently blurry. I've changed the resolution to 8M with no improvement. I've tried Auto settings, various scene settings to no avail. Is there another setting I've somehow changed without realizing?


If you don t have a ccd faulty????its probably that you have change the iso. and the iso are to high. contol this selction. if the camera dont have betterement, it s very probably that the problem is in the ccd sensor. you can search on th ... Digital Cameras

Intermittently, I get a scene in the viewfinder which is just a mass of streaks of various colors. I tried snapping the photo anyway, and that's also what came out as the image. Camera was set on "Auto". Sometimes when I gave up in disgust, the camera would work the next day, sometimes all day, sometimes only for a while. I tried fresh batteries (though I had no low battery warning) and also tried reseating the memory sD card, all to no effect. This is an S7000, about 7-8 years old, with no pri


A capacitor in the circuitry has failed producing the results you are getting.. The cost to repair outweighs the cost of a new replacement camera ... Fuji FinePix S7000 Digital Camera

I set my Canon 50d to take large RAW files (cr2) and it is not recognizing them in adobe photoshot cs3. I have tried switching out the card and the same thing happens, i have tried different computers, same thing. However the Canon Utility program that came with the camera recognizes the images however cannot edit them the way you can in photoshop, (so i might as well shoot jpeg) my question is..., is this an internal problem with the camera? it just doesnt make sense?


The plug in is avail for cs3 but not cs2 you will have to use the canon photo editor software if you have cs2. ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3290 seconds