Having problems with your Canon PowerShot A1100 IS Digital Camera ?

Lens retracted halfway and I cannot move it - Canon PowerShot A1100 IS Digital Camera


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Canon PowerShot A1100 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens retracted halfway and I cannot move it - Canon PowerShot A1100 IS Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot A1100 IS Digital Camera

Hi, I have Canon PowerShot A95, Digital Compact Camera, when i switch on the camera it will beep a few times and the LCD will display a little E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off. would be great if you could provide some advice for rectifying the problem. thanks


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Canon PowerShot A95 Digital Camera

I have a new Canon PowerShot SX100 IS and the message I receive is "lens error, restart camera." The lens will not move. I cannot restart or have it retract or expand. HELP!


Dear jeanr:Unfortunately your have experienced what is probably the number one error with these small point and shoot digital cameras. Only a small percentage of lens errors can be resolved on their own, such as by restarting your camera. ... Digital Cameras

Canon powershot SD700 IS len retract problem - Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera


... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Digital Camera Have a canon powershot SD700 IS digital elph ... "lens error ... restart camera" shows in the display and lens will not retract ... any suggestions?


The following blog outlines some repair options for a lens error:\015\012http://camerarepair.blogspot.com/2007/12/fixing ... Digital Cameras

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?


Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!


It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Hello I have a Canon digital elph sd600 and the lens won't retract all the way and it gives me a lens error message to restart the camera but the lens is stuck halfway - it won't extend fully and it won't completely retract. Any suggestions as to what I need to do to fix this? Thanks so much I appreciate it.


See http://www.fixya.com/support/r13011856-lens_error ... Canon PowerShot SD600 Digital Camera

I was taking photos when suddenly my Canon PowerShot SD 1300 IS IXUS 105 read "Lens error. Will shut down automatically. Restart camera." Then the screen went blank. The lens will not retract. I cannot do anything other than turn the camera back on and get the same message. I've never had this problem before.


There is something wrong with your lens barrel. It can be anything from some sand/dirt that got inside in which you try using some canned air to blow out the particles while continually turning it on and off. Usually what it is from is the camera bei ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Powershot A1100 IS error lens restart camera - Canon PowerShot A560 Digital Camera


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot A560 Digital Camera

Powershot A1100 IS error lens restart camera - Canon PowerShot A560 Digital Camera


Hi there,Well Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked pr ... Canon PowerShot A560 Digital Camera

Canon PowerShot S45 lens is retracted out and lens cover won't open or shut. camera cannot operate. Powers up, E18 shows on blank viewfinder, beeps 3 times and goes back to blank viewfinder. Shift lens cover back, sounds like it's opening/closing, but nothing happens other than the above.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S45 Digital Camera

Canon sd870 IS lens won't retract - Canon PowerShot SD870 IS Digital Camera


... Canon PowerShot SD870 IS Digital Camera

Lens error restart camera - Canon PowerShot A1100 IS Digital Camera


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot A1100 IS Digital Camera

Lens wont retract - Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Lens won't extend, message says lens error - Canon PowerShot A1100 IS Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot A1100 IS Digital Camera

Canon PowerShot A1100 IS Digital Camera Camera error lens restart


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101';';';;'' ... Canon PowerShot A1100 IS Digital Camera

Lens wont retract so camera turns itself off - Canon PowerShot SD750 / IXUS 75 Digital Camera


If the lens will not retract, and you cannot get to the menus, you need to have it repaired or sell it for parts on a site such as Ebay.Since it is not working anyway, you may want to try the following, be warned that it can cause more damage, ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Lens error restart camera - Canon PowerShot A1100 IS Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Canon PowerShot A1100 IS Digital Camera

Powers off my canon powershot sd600 digital camera keeps powering off after about 30 seconds. I have gotten a new battery and that didn't help. On the left hand side before it shuts down it has the letter and numbers E18 on the bottom. The zoom lens is also sticking out and will not retract. There are no error messages on the camera at all. If anyone has a solution please let me know. Thanks!


E18 is a lens error message, the lens is stuck or bent, and wouldn't come out, that's why camera shuts off after it tries to do so at the start, not much you can do, but replace the whole lens assembly ... Canon PowerShot SD600 Digital Camera

Lens won't retract, says lens error - Canon PowerShot SD850 IS Digital Camera


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot SD850 IS Digital Camera

Lens error, lens do not open - Canon PowerShot A1100 IS Digital Camera


Try one of these two fixes, if they dont work for you follow the link below for further troubleshooting.http://camerarepair.blogspo ... Canon PowerShot A1100 IS Digital Camera

Lens cant move out or in, saying lens error - Canon PowerShot A470 Digital Camera


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot A470 Digital Camera

Lens is stuck on camera.  it won't retract - Canon PowerShot SX100 IS Digital Camera


This is an entirely hardware issue......Please immediately visit any nearest service centre... ... Canon PowerShot SX100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5875 seconds