Having problems with your Canon Powershot A2000 IS Digital Camera ?

How do I turn off the date time function. It can be altered but there appears to be no way to turn it off.


Answers :

Well ,there's good and bad news.
\015\012
\015\012the usermanual....
\015\012
\015\012http://safemanuals.com/user-guide-instructions-owner-manual/CANON/POWERSHOT%20A2000%20IS-_E
\015\012
\015\012suggests that you need to set the time and date (How to - page 18), as its stored with each image. There appears no option to turn it off "at the recording stage".
\015\012
\015\012However, on page 118, hidden in the <print settings> menu the option there is the option to turn off (suppress) the date on printing.
\015\012
\015\012So it would suggest that the file is kept separately from the image.
\015\012...... Which probably means if you look through the official software you see it, but if you looked at the jpeg through another viewer (such as xp media center, adobe photoshop, photosuite etc ... there are lots) it may not show up on the projected image.
\015\012
\015\012Just a theory, but one worth looking into?
Repair Help & Product Troubleshooting for Canon Powershot A2000 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I turn off the date time function. It can be altered but there appears to be no way to turn it off.


Well ,there's good and bad news.\015\012\015\012the usermanual....\015\012\015\012http://saf ... Canon Powershot A2000 IS Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Date and time setting dont save, I changed the CR 1220 battery. Still doesnt save. Every time I turn on the camera the date / time setup appears.


In another forum I found a solution: \015\012\015\012Remove the watch battery from the cameraCarefully bend the contacts inside the camera toward the opening that the battery fits into. - I used a heavy safety pin to bend the contac ... Canon PowerShot S5 IS Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe


Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

When i turn my camera on, it seems fine, all buttons functional. When i take a photo, it flashes, but no photo will pop up in my screen. Instead the screen stays black, and then the battery starts to get really warm. then i cant turn it on or off, the only way to get the batter to stop heating up, is to take it out of the camera. i can put the battery back in, turn it on again, but it will say no pictures had been taken, and the problem continues every time i try and use it. There is no history


FREE INFORMATION REGARDING YOUR CAMERA FIRST \012\012The Stylus Tough-3000 can be submerged up to 10 feet underwater and incorporates four preset underwater scene modes as well as the ability to capture HD movies underwater. It can also w ... Olympus TOUGH3000 Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c


It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?


Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

How to remove date and time stamps from photos. I know how to turn off the time function, but I want to know remove the stamps from the photos already taken.


If the photo was already taken then the date stamp is a part of the photo, exactly like any faces that may be in there. You can remove the date using photo-editing software, but whatever was behind the date is lost forever. ... Canon Sx230 IS Digital Camera

Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.


Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera

Hi, I wrote in a couple of days ago about my camera resetting every time I turn it on. It's a Casio Exilim EX-S500. It appeared that the battery wasn't connecting right. I bought a new battery, thinking it might be the battery itself, but it's not. It's just not catching when I push it in. Is there a way to fix this? It doesn't appear that anything is broken/missing in the battery compartment. Thanks in advance for your help.


Hey,\015\012\015\012\015\012Basically, the pins that touch the battery, you can most likely pull or twist them down a little bit without breaking anything.\015\012\015\012\015\012If you want to be sure you don't break it, and ... Digital Cameras

Lens problems I recently purchased a Kodak Z7590. I have only used it a couple times. My daughter set it on the couch (still on). When I sat down beside of it the camera slid down behind the cushion. I didn't notice it till I stood up. Now the lens will not retract. The lens appears to be extended all the way and has a slight tilt to it. When it is turned on it sounds like it is trying to work, same when it's turned off. I tried to twist the lens as it was powering on and off to get it t


This is a simple fix. Take the lens and with slight pressure, pens the lens until it's straight. It will make a clicking sounds and lens is lined up and will retract. ... Kodak EasyShare Z7590 Digital Camera

The date and time start up appears everytime i turn on.


Set the date and time at least once... if it still keeps coming up when you change the batteries the back up battery/capacitor has failed... my old kodak does that so i know the frustration but it's still a good camera \015\012\015\012Ro ... Casio Exilim EX-Z77 Digital Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp


There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

My nikon coolpix S4100 was fully charged and i wa setting up the date-time function when it froze on me. Can't get it to turn off or anything.


... Nikon Coolpix 8400 Digital Camera

My camera won't turn on? after I set the date and time., the screen won't appear any images.


Check the battery if properly inserted ... Digital Cameras

Just bought my used camera from Salvation Army. I know I shouldn't expect it to work, but it does in a way. I'd like to know why when I turn the camera on, the ready light flashes a few times (7, maybe), but does nothing else. I can't hear inside the camera to see if anything else is trying to function. I hooked the camera up to the computer, and nothing happened. Not sure if this is because I didn't install the CD needed.


Http://support.en.kodak.com/app/answers/detail/a_id/16430/session/L3RpbWUvMTI4OTMzNTc3OS9zaWQvR05OV ... Kodak EasyShare C360 Digital Camera

Purple Pictures When in the camera mode my mvc-fd73 appears all purple, the pictures also turn out this way. I was outside taking pictures and noticed the screen color go nutz a couple of times. Came inside to take a few pictures and found the camera in this purple almost a solorized effect. The Screen looks fine in the play mode. I've tried a freshly charged battery and a fresh disk, but it made no difference.


This is a CCD sensor problem and should be replaced. Try to have it done free of charge by Sony even though your camera is an old model because CCD sensor should last 10 years +. ... Sony Mavica MVC-FD73 Digital Camera

We were wondering if there is a way where we can turn off the date and time from showing when we play back what has been recorded. On a big plasma and lcd television, this information (although useful) we find very annoying and distracting. Thank you. Andre in Brisbane, Australia


Most cameras have the option of turning the date and time display off or on during recording. Unfortunately, if you recorded with the date and time on, then it has become part of the image and can not be removed. ... Digital Cameras

Why does the date and time setting screen appear when I turn on the camera?


Turning on the camera while the date and time are not set or after the date and time settings have been cleared due to a total cut off of power (which occurs when batteries are dead and the camera is not being supplied power via AC adaptor) causes th ... Casio Exilim EX-P700 Digital Camera

Went on a 3-week trip with my SX120is and it performed flawlessly. Downloaded all pictures upon returning. Hadn't used camera for a couple of weeks when yesterday the screen started displaying a very low resolution frozen picture and the camera stoped responding to all the controls. After about 10 seconds, the camera turned off without retracting the lens. This problem keeps repeating, but not the exact same way every time. Sometimes the camera functions well for a minute or two before hang


Did you go by the ocean on your trip? If so it probably got some salt air in it and would need to be cleaned. ... Canon PowerShot S3 IS Digital Camera

When switched on the camera tries to open the lens. It is clearly being obstructed in some way, and after three attempts closes down with the message "Please turn camera off and on again". If tapped gently sometimes the lens will open, and if the lens is caught and encouraged to stay out then ooccasionally the camera opens as normal. If the lens does stay open the camera appears to function as normal.


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Panasonic Lumix DMC-FS5 Digital Camera

Camera is not going ON, message appears that "turn the power off and on again" but all other features are working properly, like date, time etc.


Reset your camera by pressing the reset button using a hair/paper clip. This should reset the settings back to factory ... Sony Cyber-shot DSC-W35 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.


... Canon PowerShot S400 / IXUS 400 Digital Camera

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2832 seconds