Having problems with your Canon Powershot A2000 IS Digital Camera ?

The canon powershot A200is won't flash. have to turn off the lightening bolt flash to take picture. Can not get any of the flashes to work even after reset to manual setting.


Answers :

Repair Help & Product Troubleshooting for Canon Powershot A2000 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The canon powershot A200is won't flash. have to turn off the lightening bolt flash to take picture. Can not get any of the flashes to work even after reset to manual setting.


... Canon Powershot A2000 IS Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Olympus SP-550 UZ won't focus properly most of the time. Focus point should be infinity since my subjects are seascapes, sunsets and clouds. I've tried all 3 AF focus modes but none work consistently. I can get it to focus sometimes if point the camera at the ocean first. I've even tried manual focus but it won't focus to infinity. This camera is practically new, has never been dropped. Is this a known problem with this camera? Is it a settings problem (I've reset the camera to factory settings


... Olympus SP-550 UZ Digital Camera

The flash does not work even if the flash setting is SET to FILL ( the flash will work every time the camera is in used) I already tried to reset the settings to default but still the flash wont work my camera is olympus FE 190


Does the camera indicate that the flash is turned on? In most olympus cameras I have seen there is a lightning blot at the lower left corner of the screen. Verify that it is indeed there and let me know. ... Olympus FE-170 Digital Camera

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.


There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Corrupt images Anything I take in the portrait, landscape, the green box, or close up end up corrupt. The manual settings along with the fast action, no flash and night time settings work fine... I have formated the card, I have tried everything can think of. I even looked through the whole manual. I tried a second card... nothing, why would those four settings not work and the rest are fine?


Try updating firmware from canons website under support fixes all sorts of weird problems ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

I am having problems with the flash working on my camera. It does not seem to matter if it is in automatic or manual modes. When I take a picture in either mode, when a flash is needed, the flash icon just blinks on the display. The camera will not take any photo when this is happening. The only way I can get my camera to take a photo is manually set the flash to off. Why is this happening?


Please reset camera through Reset option in Menu. This will set camera on default settings and any glitch in settings will be removed.Thanks. ... Canon PowerShot SD870 IS Digital Camera

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u


Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

I can't get my camera to flash or work in the "Auto" mode. I've cleared all of the images, reset the settings and use custom settings. I place the camera on "Auto" and turn it on. It goes into the delay mode for 59 seconds and then goes to sleep. It won't take a picture or flash.


... Moultrie GameSpy 4.0 Digital Camera Deluxe

I have cyber shot DSC-S730 even though setting is set for flash on or auto, flash doesn't work. Symbol on the bottom left appears, but I don't have a manual to troubleshot. Can someone help?


... Sony Cyber-Shot DSC-S500 Digital Camera

Flash inop I have a Nikon COOLPIX L4 and the flash quit working. I have replaced several sets of batteries and reset all the settings to factory default. Nothing I have done has resolved it. The manual is no help. HELP! Cricket


It is either the capacitor, which stores the electric energy for the flash; or the flash bulb itself.Be careful with diy. If the capacitor is ok, it will give you a nasty shock when you touch the contacts. It is very dangerous and could cause s ... Nikon COOLPIX L4 Digital Camera

Hi I am having problems with my flash button it is stuck in the off postion.I cannot get the camera to change it to an on position,manually i can pop the flash up and even then it doesn't work


... Olympus SP-590 UZ Digital Camera

Hi there, my Nikon D40x flash suddenly stopped working (popping up but not flashing) after I was fooling around with the manual settings, now no matter what I do the "no flash" icon appears beside the battery life icon...any suggestions-I've gone through the menu and can't seem to get it. HELP!!!


Try turning camera on,\015\012Then press both Green buttons for a count of 10. This should restore factory reset.\015\012\015\012Some models also have a reset button under a connector flap, or go into your menu. Under Custom Setting ... Nikon D40x Digital Camera

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.


Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

Camera was working fine. replaced batteries, went thru the set up procedure everything fine. checked the camera a few days later, no pictures even though you could see fresh tracks in the snow in front of the camera. brought the camera in to see what was wrong. unable to get the set up screen or tones. is there some type of reset?????


... Bushnell 119415 Digital Camera

I have a Sony DSC-T90, i had initialized the reset default setting but the camera flash is still not working even in different shooting settings. what is the best solution for this?


... Sony Cyber-shot DSC-T90 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

Overexposure My Nikon D40x is WAY overexposing in AV or S mode. Does it need repairing? (a long trip to get fixed). I tried resetting to default store settings, tried using only manual focus, tries changing the metering options. Noe have worked. AV mode worked beautifully 6 months ago in Africa ......


That sounds like the aperture blades may be sticking open.\015\012See if the overexposure gets worse and worse as you close the aperture\015\012When you see these kinds of symptoms, and is usually caused by oil that's leaked on the apertu ... Nikon D40x Digital Camera

I own a D90 and of late have had problem getting the shutter to actually fire and take a photo at times. It will work sometimes and not at others. I have tried changing the memory card - putting it on manual etc but still won't work. The battery is fully charged. It occasionally comes up with an r05 and r21 code in the R lower box and a flashing F at the top R when this seems to happen. I haven't played with the settings all that much - just since this has begun happening. Can you make any sugge


The r codes you mention are related to speeds of buffering information onto the memory card. A high ISO NR setting on the camera has a huge impact.... the cross over point is 800 ISO. If you have it on, and are on 800 or over, the remaining buffer ca ... Nikon Digital Cameras

I have a Sony Cybershot DSC-W55 and when I go to take a picture with the flash on, it doesn't work and I get this error that says E:91:01. It also makes this quiet ticking noise when it's on. I reset the settings so many times and it still won't work. PLEASE GIVE ME A IMMEDIATE SOLUTION


The immediate solution is that your flash unit within or the triggger or control circuit to the flsh is fault.\012now since thisis within and just opening wont solve issues, it is advice able that you have the camera checked for errors, to esti ... Sony Cyber-shot DSC-W55 Digital Camera

Images I seem to get yellowish images and images that are really dark even when I put the flash on. The flash seems weak, almost defected. But then in the next series of shots it will work and the picture will come out just fine. All of this in the same setting with the same subject and everything else a constant too.  Help please, it seems like I must be doing something wrong either that or my camera is broken. P.S. it is brand new Amber


No that isn't it but I am not offended. The flash in fact looks like it goes off but at 10% of the full strength. I had other people try to take a picture to see if the same thing happened to them and it did and I saw them, they did not have their ha ... Canon PowerShot SD1000 Digital Camera

Flash will not work on automatic setting even in the dark. I have tried to reset but it still will not flash.


This is caused by the flash capacitor inside witch fills with eletricity to deliver to the flash bulb, if this is not filling or giving you a sign that its ready to flash then you got ether one of two issues:\015\012\015\0121. Battery ... Sanyo VPC-E760 Digital Camera

My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks


Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera

Nikon D100, can't get flash to work. I have reset the camera to factory setting, but still no joy.


... Nikon Digital Cameras

My panasonic lumix dmc-fs3 will not connect to my pc so I can upload pictures. It is not my usb port because I can plug other things into it and works fine. This happens with any usb cord I try to use. Also when I try to connect it I get a message that says picture is displayed for 4:3 tv for a 16:9 setup and even though i've reset all the settings on my camera it still comes up


Start using a card reader instead of your camera. ... Panasonic Lumix DMC-LZ2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4225 seconds