Having problems with your Canon PowerShot A310 Digital Camera ?

Blured LCD ViewFinder

\015 LCD viewfinder shows blurred image.\015\012\015\012Dave\015

Answers :

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
\015\012Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
Repair Help & Product Troubleshooting for Canon PowerShot A310 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blured LCD ViewFinder

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A310 Digital Camera

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).

HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

The Viewfinder on my camera Canon Powershot SX20IS turns into black, but the LCD screen is okay. How will I see both the viewfinder & the LCD in normal viewing?

... Canon PowerShot SX20 IS Digital Camera

Camera shows no image through the viewfinder or on the lcd screen.pressing shutter button will actuate the camera, but only image is of a black box.using the display button to turn off the lcd does not help. the information icons show both in the viewfinder and on the lcd. camera has not been subjected to any abuse of any kind. has not been used for about 2 months

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S3 IS Digital Camera

My fuji finepix s7000 has a distorted/ blurry image in oth the LCD and viewfinder the image is blurry in the viewfinder and the LCD. When I take a picture, it gets even more distorted.

If the image is blurred on both clean the lens, if it does not fix it then it is probably a faulty lens problem. ... Fuji FinePix S7000 Digital Camera

Both my lcd and Viewfinder appear black (no image) in in shooting mode. I am able to view pictures on both the lcd and Viewfinder when I am in playback mode. i have a Cannon Powershot S3 is. Any suggestions?

I have this EXACT problem and notified Canon Customer Care via email today as I have found around the internet that this camera and it's predecessors had the same problem as do other A models. I got a canned answer about how they know of NO issues w ... Canon PowerShot S3 IS Digital Camera

Canon Power Shot S1IS 10x optical zoom 3.2 mega pixels: I turn the camera on and cannot view any subject images either through the viewfinder or LCD screen. The cap is off and the LCD screen and viewfinder are completely black. The display information works fine.

Hi,\015\012Your Canon S1IS camera has defect in CCD Sensor and Canon will repair it Free Of Cost. For details, please click ... Canon Digital Cameras

Blured viewfinder Pictures download OK, picture image in display is OK, but in viewfinder both picture image and overlayed icons are blured, as in multiple images.

Look at the viewfinder on the camera.Now look on the LEFT side of the viewfinder; just above the swivel-screen.You will see a little thumb wheel there.That is the focus for the viewfinder. Move it up and down to b ... Canon PowerShot S3 IS Digital Camera

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem

Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

My lcd screen won't come on. The viewfinder is working fine. The display button clears and replaces information on the viewfinder but it will not turn on the lcd. The camera is taking good pictures.

Hi. Problem might be shutter is stuck or the CCD sensor is having the problem. Please cehck this link for possible solution. ... Canon PowerShot S3 IS Digital Camera

Canon ixus i7. LCD screen is cracked, and thus does not sdisplay any image, however the camera still zooms, takes pictures, etc Obviously now viewfinder so only way to see what your taking pic of is through the cracked LCD.(whic you can;t as it is pure white with black leak lines of the crack. I assume its a simple replace of the LCD screen which i would assume connects like any standard LCD screen using a ribbon cable?

I know some canon LCDs can be replaced by the user. Canon will sell you the specific part or you can find them on ebay. The LCD ribbon cable can be easily pulled out and with a little fiddling a new one can be put in. I have not personally done it wi ... Digital Cameras

Our canon rebel T3 LCD will not display the menu or field of view. We can see the field of view thriugh the viewfinder only. The LCD does work in the video mode, so it is not that the LCD is broken. The LCD is totally black in all picture taking modes. Thanks.

... Canon EOS 1100D / Rebel T3 Digital Camera

Viewfinder jammed The viewfinder is out of focus and does not move when the zoom control is operated. The main lens mechanism seems to work, the field of view changes on the LCD display and pictures taken are in focus. Perhaps the zoom mechanism makes more noise than it did. Does anyone know how the viewfinder is adjusted and whether repair is likely to be feasible? Thanks

The mechanical link between Lens on V/F element has broken - Only Olympus will be able to do anything for you -check out the support site. ... Olympus Camedia C-5050 Zoom Digital Camera

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.

The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras

The viewfinder on my Canon PowerShot SX20 is blurry while the LCD screen is fine. When I take pictures using the viewfinder they come out ok so the camera is focusing but not through the viewfinder.

Check the diopter adjustment on the left side of the viewfinder. ... Canon PowerShot SX20 IS Digital Camera

Viewfinder can i use the lcd moniter on back of camera as viewfinder or am i stuck with the tiny eyepiece viewfinder? can't find away to use moniter as view finder.

The shutter remains closed on a DSLR until you take a picture. There is no way to preview an image that does not exist yet. Being stuck with the tiny viewfinder as earlier cameras had is a good thing. Holding a camera out from your body ... Nikon D40x Digital Camera

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.

On camera menu, turn on Reverse Disp. ... Digital Cameras

Canon powershot s2 with rotating lcd screen. lcd screen is black and not available for taking pictures, I amd forced to use the viewfinder to take a picture. When I playback the pictures the lcd works just fine.

The camera sensor for the lcd is most likely not functioning.\015\012\015\012I would suggest repairs, got warranty? free repair estimate is available from www.a ... Digital Cameras

"Milky" Viewfinder I was going thru the menu(s) on my Konica Minolta A2 and I somehow managed to set the viewfinder to a milky color....The LCD is fine and the cameras other functions are fine....Does any one know how I can reset the viewfinder back to normal ?...thanks

There's an LCD/EVF brightness control on one of the menus. You must select either LCD or EVF to adjust. Have you tried this? You might also try changing the frame rate, the higher rate goes to a lower resolution, to see if this changes anything. By m ... Konica Minolta DiMAGE A2 Digital Camera

Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?

Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera

Viewfinder When switching the camera to the Eye viewfinder it stays in the rear LCD view. Even after switching off and on in various orders it will not go into the Eye viewfinder mode.

Please check the rotary switch on the camera is in the correct position. The viewfinder and monitor settings are very close together!\015\012\015\012You can download the manual from the link below:\015\012\015\012http://ca.konicaminolta.com/support/m ... Konica Minolta DiMAGE Z10 Digital Camera

Lcd panel I've just bought a new canon eos 350d and the lcd panel will not show the image of what I am taking a picture of. I can take a picture, and display it back on the lcd panel but just not display what is in the viewfinder when I want to take a photo. Have I got a setting wrong somewhere or is the camera faulty? thank you!

SLR's don't show what your seeing through the view finder on the LCD. That is a function on point and shoot cameras, not on SLR's. ... Canon EOS 30D Body Only Digital Camera

Lcd Hi. I was sure that the LCD monitor could be used instead of the viewfinder. I cannot find any information on how to activate that portion. All I can do is turn the LCD off and on and in the on position all it ever shows is the current settings. When a picture is taken it goes to the 2 second viewing and then back to the settings menu. I went through the manual and cannot find any advice.

Normaly, a reflex camera cannot use the LCD monitor as like a non reflex camera. Your camera was designed to be used like a film camera. The CCD panel at the film plane is sort of like having a film inside the camera. \015\012\015\012Ther ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

LCD Screen Okay, Like an idiot, I turned off my LCD screen, long ago, so that I could use the viewfinder since both cannot be used at once. I would simply like to know HOW TO TURN THE LCD SCREEN BACK ON!!! it has driven me crazy, the book doesn't help, I have gone through resetting to default settings and nothing. I think I have really changed something in the setup and I hope I can reverse it. Anyone with a solution??? Please??? Driven Crazy by cam Rebecca

See this knowledge base article at Canon: ... Canon EOS-20D Body only Digital Camera

Dark LCD I have an A70, about a year old. The problem is the LCD screen is very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture with the viewfinder the picture is exactly what the LCD screen looks like. This happened as we were using the camera. I also cannot view any of the pictures in the camera. I no the display is not completly out because it works to access the menu screen. It wasn't droped or anything. I can't find any setting to change

I have a sony cybershot dsc w730 , since a year. The problem is that over 2-3 months the LCD screen has become very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture, the picture is exactly what the ... Canon PowerShot A70 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0574 seconds