Having problems with your Canon PowerShot A400 Digital Camera ?
I dropped my camera and it is giving me an E18 error. It doesnt want to turn on. Help please. Should I take it apart? Canon Powershot A400. Thanks
I Dont Have a repair problem i was trying to get info on a warranty on my new phone .
It may or may not working after water damage, i suggest and at this point you have nothing to lose,if u want u can try to take it apart but i will warn you, camera have lots of small parts and you might not remeber what goes where, i suggest save for another, when device are drop in water only about 5% turn out to be ok. good luck
Repair Help & Product Troubleshooting for Canon PowerShot A400 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I dropped my camera and it is giving me an E18 error. It doesnt want to turn on. Help please. Should I take it apart? Canon Powershot A400. Thanks
I Dont Have a repair problem i was trying to get info on a warranty on my new phone . ... Canon PowerShot A400 Digital Camera
Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.
Try these procedures. ... Canon PowerShot SX100 IS Digital Camera
Hi there, I have a Canon Powershot S3IS and just lately when you try to turn it on it comes up with a message that says E24. I have looked through the manual and cannot find anything resembling this message. It turns on for a few seconds and then the screen goes black and displays the E24 message. I was taking photos during a recent wedding I attended and then it cut out suddenly and displayed the E24 and since then will not turn on. Please help me as my brother and his family are arriving soon
... Digital Cameras
Canon PowerShot SX10 IS- When looking through the viewfinder (display screen is turned in,not in use) to either take a picture or to review previously taken pictures, everything in the viewfinder appears blurry. When looking at the display screen to take a picture or to review pictures, everything looks normal. Please help. Thank you.
Glad to be of service. ... Canon PowerShot SX10 IS Digital Camera
Troubleshooting problems I have a canon powershot s60. I tried to take a picture earlier and the screen is completely white. The camera turns on, the battery is fully charged and there is nothing wrong with the digital card. THe camera wasn't dropped nor did it get wet. I keep trying to turn it off and on, but all I get is a white screen. No images. But there are 900 images on the camera card and i just used it this morning. Please help. Thanks, Shannon
Take a picture with the camera and download it. If the pictures also shows up white then this probably is a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's w ... Canon PowerShot S60 Digital Camera
Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx
Hi,\015\012I have the same problem with my 1 month old EOS 1000D.\015\012I tried cleaning the lens contacts, but the problem was not solved.\015\012\015\012ERR 99 is a generic error. I think this is a common message for a lot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i
Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
I have a camera Canon Powershot G9 and I was taking pictures when suddenly the camara got blocked even with the zoom lens out and I can not turn it on or off, see picture or take pictures.nothing. When I connect it to the computer it does not recognize it. Please help.
When a digital camera gets pressure on the lens, while it's extending, a number of things can happen with the tiny gears inside the lens assembly. They can get cracked, jammed, or broken. The following web blog lists things you can try to get it ... Canon PowerShot G9 Digital Camera
Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.
This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera
Hi! ! have a problem about my digital Canon powershot A400. My problem is How to open the unlocked card always appeared..i dnt know what happened i cant take a shot. Please help me to back in normal. Respectfully yours. editha Marie D.Lueong
Take the memory card out of your camera and look at it. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. ... Digital Cameras
I have a canon powershot sx110is and when i turn it on it will not take any pictures but instead gives the message "memory card error." When I put it to the display mode it says the same message plus "memory card locked." I checked the Sd card and it isn't manually locked. I don't know what to do and I don't think I did anything to change the settings. Help!?
First see if the camera will work without the memory card installed. Then format the internal memory using the camera's setting as described in the manual.Then turn OFF the camera and insert the sd card. Turn on and reformat the card too. ... Canon Powershot SX110 IS Digital Camera 9.0MP
My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.
Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera
The lens on my canon digital camera will not close...i am unable to take apicture and do not know the reason for this...when my camera is put on the object is not clear and in few seconds the screen is blank..i dont know what to do..please help...i have the canon powershot sd550 and the problem that appears is the E18...please help
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot SD500 / IXUS 700 Digital Camera
Canon a80 dear hi, hope u all r well. please help me to solve the problem for the canon powershot a80 which suddenly got dead.when i press the power switch it takes around 150 ma of current till i keep power button pressed.no light comes on.After releasing thepower button the current goes down to zero. please help me.i m an electronic technician.this is my personal camera.thanks my email [email protected]
Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A80 Digital Camera
Can you please, please help, my beloved Canon Power Shot A75 (purchased in 2005 in France) has developed a LCD display problem when turned on. A few months ago the screen distorted with lines and now the screen is totally black. I am asking you for help as I had no luck to find anyone here in France to give me any help or support. Thank you. Looking forward hearing from you. Best wishes
This is most likely a CCD problem that is being repaired free by Canon. I don't know where the French repair center is but you might find it on the internet. For more details about the free repair, go here: ... Canon Digital Cameras
Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.
This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera
I have a canon powershot a430. When I am taking pictures in daylight all pictures are heavly over exposed, Si I cant take pictures but the lest is ok because I can take his res video of 640x480 without any problem. please help me... what to do.
See manual ,reset setup to factory default,if no results,probably the shutter flex cable is broken in the lensblock,replace or replace the lensblock,labor intensive ,technical skill required ,parts are available at ebay.\015\012\015\012Je ... Canon PowerShot A430 Digital Camera
Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??
Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera
Canon powershot a400 won't take a picture
Often, it occurs due to a misaligned lens. If your camera is still under warranty, the best thing you can do is to take it to the nearest official Canon repair shop and Canon should fix it for free. ... Fuji FinePix A500 Digital Camera
My Camera turns on But will not take a picture, I push the button to take a picture and it doesnt do anything! I took the batteries out, charged batteries, took out the lens, took out the card, and put them back in, i cant find anything wrong, the button will not work, PLEASE HELP! I have the Canon Rebel XTi.
Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Canon EOS 400D / Rebel XTi Digital Camera
All of a sudden my canon eos rebel xs stopped taking pictures. The camera turns on, focuses, and snaps like it is taking the picture but it is nothing but black. I have removed the battery and completely charged it and reinserted it and still nothing. Please help.
Hi.This may happen because of a firmware defect. Canon advice is to update the firmware to latest version. Click on page below, then choose EOS Rebel XS Firmware Update Version 1.0.6 . ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
My Canon EOS Digital Rebel XTI will not automatically focus. The little AF points don't show red to signify it is focusing. The camera just takes a blurry picture. It was working perfectly one minute and the next it wasn't. I tried taking the battery out and the points would turn red a few times then they would quit working again. Please give me an idea what might be wrong. Thanks,
Does the lens have an AF / MF switch on it, if so ensure it is on AF ... Canon Rebel XT / EOS 350D Digital Camera
The shutter will not open on my Sony DSC-P52 camera in the picture taking mode. It just flutters and gives the message to "turn off the camera and turn it back on." Apparently the gears are stuck. I have new batteries in it. Please help. Thanks.
Shutter will not open properly ... Sony Cyber-Shot DSC-P52 Digital Camera
Please help! I have a Canon Powershot A460. When I take pictures in macro mode, they are all flashed out, so bright even if taken indoor. I can barely make out an image. But if I take normal shot, results seem normal. I have read the manual -basic & advanced- but I can't find the right solution. This does not happen before.
Try going into the M(anual) mode on the selector dial and then turn off the flash (press the right side of the controller button until you see the lightning bolt with a bar through it). The macro shooting option should still be available in the manua ... Canon PowerShot A460 Digital Camera
I received a Canon PowerShot SD870IS Digital ELPH as a present for Christmas. Unfortunately, my apartment caught fire three weeks ago. My Camera was in its case. the case is burnt on the outside and the camera looked dirty on the outside. It seems to be working but I am just worried that there might be some more damage in the inside. Shall I send it to Canon for an overhaul? What do you suggest? I cleaned the outside but I am still not sure. Please help!
Hi,If it is not under warranty and the camera is working good and your not facing any problems then i believe that you don't need to send it for a service.If it is still under warranty then please go ahead.The service will be free o ... Digital Cameras