Having problems with your Canon PowerShot A400 Digital Camera ?

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


Answers :

E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash module as this can give a nasty shock.Big black capacitor) You will see the lens module take the it to bits carefully and re seat the components. I have done a few over the years. It takes about an hour. If you have any more issues contact me.
Repair Help & Product Troubleshooting for Canon PowerShot A400 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Black screen hi, i have a canon powershot A75 and when i turn the camera on i see the blue logo then its supose to be the picture screen but my picture screen is black n fuzzy i dunno y i thought maybe the settings were wrong but i dunno plz help me i need my camera for my brothers wedding help me fix this problem! remember black camera screen! thank you sue


Hi,\015\012Your Canon A75 camera has problem in CCD Imager and this part will be replaced to get back picture.\015\012Canon announced free of cost repair scheme for subject problem and you can see details by clicking ... Canon PowerShot A75 Digital Camera

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.


Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera

I recently got my Canon S2 1S camera back from being repaired because it developed the "black screen." Now the problem is the lens is sticking and on occasion it will not turn on. Is that another defect the Canon has and is is worth fixing again.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot S2 IS Digital Camera

Black Screen Hi up until yesterday camera worked fine, I had it in my handbag and it may have got knocked. Whenever I turn the camera on the LCD screen is now black and when I take a new picture that also just comes out black, although I can view old pictures. I called Olympus who to repair this camera will charge more than the cost of a new one. Love my camera and would like to have a quick fix for this problem if poss. Please help!!! Screen is black. It looks like I have the lens


Seems the contact to the sensor, or the sensor itself is gone. Not easy to DIY. I suggest to bring it to an independent service shop in the area and get a quote, ... Nikon Coolpix S4 Digital Camera

Black Screen Hi up until yesterday camera worked fine, I had it in my handbag and it may have got knocked. Whenever I turn the camera on the LCD screen is now black and when I take a new picture that also just comes out black, although I can view old pictures. I called Olympus who to repair this camera will charge more than the cost of a new one. Love my camera and would like to have a quick fix for this problem if poss. Please help!!!


I just started having this problem with my canon PowerShot A310 and checked their service website which says "Effective immediately, and regardless of warranty status, Canon will repair, free of charge, products exhibiting the above-mentioned malfunc ... Olympus MJU 300 Digital Camera

When I turn on my Canon PowerShot S2 IS camera and set it to shoot mode, the screen is black. A while back, I was able to get the screen to show by toggling with the camera and constantly turning it on and off. Now, however, it is completely black and will refuse to work. How do I fix this problem? Thank you.


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot S2 IS Digital Camera

Hi, I have a Canon Power shot A85 digital camera. This camera has a problem with the screen. When I turn the camera on, the screen shows black and when I take the picture, it is still black. What should I do? Cheers


... Canon Digital Cameras

I own a Canon power shot SD790 IS and I've been using wonderfully for the past few months Last weekend when I turned on my camera to view some pics I noticed a little blue screen on the corner of my camera in when I take pictures and upload them to the camera the blue spot doesn't show up on the pictures thank God but it's on my LCD screen and it seems internal I don't know if it's dead pixel or a lens problem can this be fixed at home please help I can't send it back because I ordered it online


It seems to be a dead pixel, best thing would be to have it replaced from the Seller, else you can get it replaced with a new working lcd panel. This may be an expensive solution.Check whether you have a worldwide warranty from Canon, that will help ... Canon PowerShot SD790 IS Digital Camera

E18? I can't turn on my camera. When I turn it on it beeps couple times then error E18 comes onto the screen and turns off. I read that I had some problem with my lens. How I can fix that? Canon Repair costs me as much as money that I can buy a new camera.


Http://www.4130-products.com/e18/index.htmlMy SD550 had an E18 error. I took it apart and found the broken gear, but was not able to get just the gear I needed. But you gain a lot of detailed photos of me taking apart my camera. ... Canon PowerShot S500 IXUS 500 Digital Camera

Hi, I have a camera, a Sanyo VPC-T1060 and it's having some problems. It turns on, flashes, takes photos apparently, but the LCD screen won't work. It turns white when I turn it on and when I take a photo with flash black lines appear all in the photo. I've tried finding a reset button, but nothing has been found. As I said, it takes photos, but I need the LCD screen to take a photo so I can see if I messed up and should take more. I'm a photographer and I got this camera as a side kick to my DS


Try to remove the memory card if used, and blowing out the connectors in the camera cavity with compressed air (to remove dust if any).\015\012\015\012Make sure the contacts are clean. If necessary try another memory card.\015\012 ... Sanyo VPC-T1060 Digital Camera

Hi,Have got got a canon(powershot a710 is) whenever i turn on the camera i get a few beep noises and the screen remain black with the message'lens error,restart the camera'....and it then turns off.....I have not dropped it down.hoping someone would help me out with a solution. Cheers, Sanjana


The lens is jammed. Usually dust or grit gets in the mechanism and causes it to stick. Could try blowing down the side of the lens but it will probably need taking apart and cleaning. It is not an easy job to do but it might be worth trying as it wou ... Canon PowerShot A710 IS Digital Camera

I have a Canon PowerShot A400 digital camera. when I turn the camera on, it acts like it is going to turn on, then it starts beeping and the screen goes black. It has the message E18 in the lower left corner of the screen. I changed the batteries, but it is still doing it.


Please see this post:\015\012\015\012http://www.fixya.com/support/t102982-e_18_problem\015\012\015\012Good Luck!\015\012\015\012Brian ... Canon Digital Cameras

Blank screen all the icons are present on the screen, but the rest is black and blank. tried taking shots but nothing appears on the screen. what is the problem. got this camera may 2008. i was taking pictures, and trying to do some color accent and all of a sudden, screen turned black even in auto mode and video cam mode.


Try this...if you can still get into the setup menu, scroll to "reset" and follow the on-screen instructions. If not, remove the memory card and battery...press all the buttons...leave the camera alone for 20 minutes...insert the card and then the ba ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I bought a new canon 50d in july and used it through the summer sporadically in preparation for an overseas trip. Periodically got an error 30 message on the LCD but always ok after turning camera on/off. In India for 3 weeks in Oct. Got the error 30 screen 4-5 days a day during heavy shooting. Internet says error 30 is shutter problem. Does camera store (Ritz Camera in DC) fix this? Camera is barely 4 months old. What should I do? Please keep explanations simple since I am technology challenged


Sorry about the trouble you're having with the camera. I searched the manual for error code 30, but I found nothing.You could try Ritz, but I think you'll find they're probably not set up for repairs. Since the camera is less than a yea ... Canon EOS 50D Digital Camera with 28-135mm lens

The camera was dropped by my son, which happened before, when turned on the canon logo shows then the screen is black. An error message in the bottome left says E1b or E18. Help!! thanks


Here is some information on the E18 error: http://www.e18error.comA repair guide (suggestions) http://www.e18error.com/repair.htmlForum for users with the same problem http://www.e18error.com/posts/index.php ... Canon Digital Cameras

When i turn on my powershot A75 Canon camera the screen is black. I have taken out the batteries and replaced them also, this has not checked the problem.... I have also taken out the memory card and put it back in and this still has not helped the problem. The camera has never been dropped so i am unsure of what the problem could be. please get back to me and let me know what i should/can do. thank you Lorraine


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A75 Digital Camera

Hi i have a CANON A1000 IS and I just got it a week ago and the batteries lasted me 2 days. I tried charging my camera but when i went to turn my camera back on it said low batteries then immedietly after the screen went black and at the bottom it said change batteries. So I put in new derecel batteries and i turned it on and it showed the same thing. low batterie then change batteries right after. Do you know whats going on with this thing? How do I charge the camera?


Hello,\015\012Are you installing Nmh (Nickle- Metal Hydride) rechargable batteries?\015\012If not then your camera probably will not recharege them.\015\012Also trying to recharge non rechargable batteries can cause damage to the ba ... Canon PowerShot S100 Digital Camera

Help! Hi! I have a canon powershot S45 digital camera, when i turn it on, I get the canon screen and then it goes straight to a black screen and on the bottom left hand side it says E18...what do i do?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012\015\012 ... Canon PowerShot S45 Digital Camera

White screen My camera (olympus Fe-46) seems fine when I turn it on, but when I make a picture outside, the screen turns white instead of showing the picture. When trying to make a picture in my room, it showed the picture with horizontal black stripes on it. Has anybody got a suggestion/solution for this problem?


This is a problem with shutter not fast enough opening to take a picture indoor shows the horizontal lines. In sun light it is too slow and over expose the picture. Not worth the trouble to fix, buy another camera? ... Olympus Digital Cameras

Screen problems i also have an olympus camera. I just got it about a month ago and my screen is'nt working right. When i turn it on everything is working and shows everything it should but the image view. it iss black and i can take a picture but its jus a black picture when i take it. what should i do to fix this? i have tried taking the battery and memory card out messing with the settings and formats but nothing has worked. What should i do?


... Digital Cameras

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

Our camera when you turn it on has a blank screen and you cannot take pictures. You can review pictures and see the different menu modes, but the screen is otherwise black. We have had it repaired once for almost $200 by a Canon repair centre with the exact same problem about 18 months ago. They said it was a shutter issue?? It sounds like it could be a CCD issue? I have written Canon customer service over 2 months ago, suggesting a defect, to which I have received no reply.


See this link:http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=9824&keycode=2112&id=48264Your camera is one of those listed, and your symptoms indicate this is the problem. Canon should rep ... Canon PowerShot S1 IS Digital Camera

Canon sx200 is, lens error restart camera, after taking some pics I wanted to delete them, so after deleting one picture I've got black screen and the message "lens error restart camera" and the camera turn off by itself. And there is no way to operate the camera after restart because it's showing me the same message as above mentioned.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5630 seconds