Having problems with your Canon PowerShot A410 Digital Camera ?

E18 displaying on screen and camera not registering when connected to computer

Answers :


The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Repair Help & Product Troubleshooting for Canon PowerShot A410 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

E18 displaying on screen and camera not registering when connected to computer

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot A410 Digital Camera

I am trying to connect my PDC 3070 camera to the computer to view pictures. Have installed the CD that came with, but can't get through to do the instructions with Windows Explorer. My camera displays on screen MSDC while in Playback and doesn't do anything else.

Hey kittywhat you have to do is load the software for your camera and from there, you eill be able to do about anything you want. but since your saying that it doesnt do anything else in Windows explorer.i may suggest you use ... Digital Cameras

My camera not showing my picture when i connect to the computer. on the screen word USB mode, mass storage, memory stick display. i have a sony Cyber-shot DSC-S750/S780. And my computer not pick-it-up

You need to install software from the cd which had been provided along with the camera. Then select USB mode option and then you can get photos and videos in the camera onto your pc. Software installation is a 1 time process and next time onwards yo ... Sony Cyber-Shot DSC-S75 Digital Camera

Black screen When i bought a usb cable for my pentax s5i.. and connected it to the computer the screen suddely turned black, i thought that happened coz the computer is reading it but the computer wotn recognize it at all and even when the camera is not connected to the cable.. the screen is still black.. i tried taking the battery out and squeezing the camera but it still wont work.. it still takes pictures htough and the pictures are fine. Thanks for your help :)

... Pentax Optio S5i Digital Camera

I have D-link DSC-350F, when I connect with my computer, camera display PC,While PC said camera not found may be USB cable not connected properly, but its already connected thats way, camera display PC, its mean its connected,please help me to solve this problem for use my camera. my operating system is windos Vista

Solve all your problems by using a card reader. ... Digital Cameras

Olympus FE-320 Digital Camera will not transfer photos to Computer via USB port hook up. When connected and PC or Transfer selected, screen message on camera says "Wait" and never connects. When Olympus Master 2 program opens on computer it does not recognize Camera Connection and continues to search for Camera so no images can be transferred. This combination did work in the past but has stopped. All updates have been applied. Need help.

I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for ... Olympus FE-320 Digital Camera

How can i connect my camera to a comp for live recording .....!!when i connected my camera to my tv av input i was able to see whatever i record in camera in my tv screen ...similarly.how can i connect my camera to computer and see in my computer ...plzz reply me fast ........

Well, your computer isn't a tv. What you want is called "tethering" and is available for a few high-end DSLR cameras such as Nikon and Canon. ... Canon PowerShot A480 Digital Camera

I cannot down load my photos from my digital camera on to the computer. I have connected the cord to the camera, switched it on, connected the cord to the computer USB outlet and no message comes up. I go into My Computer to click onto camera or similar icon, but there is nothing foreign registering. Where am I going wrong ?

I just experienced this problem and went round in circles for a few hours before stumbling on the solution. My camera, a Sony Cybershot, has 4 USB Connect modes in the Setup menu: PictBridge, PTP, Mass Storage, and Auto. The only mode that would work ... Digital Cameras

My Dell laptop running Vista will not recognize my camera (Samsung BL103). The USB port works fine for other things, just not when connected to the camera. The camera screen also turns dark when connected to the computer, but works fine when disconnected. I can take pictures when connected to the laptop, but the screen is still dark.

Time to start using a card reader. ... Samsung BL103 Digital Camera

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o

Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

When I connect the camera to the computer it says there's no camera detected. I try to turn the camera on and the welcome screen comes on and turns off immediately. Its completely charged... works fine when the camera isn't connected to the computer.

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak EasyShare M530 Digital Camera

After using my Finepix x700 for a couple of years to download photos onto my computer, for some reason I cannot now do so. Two weeks ago at a friends, I tried to connect her usb port to my camera to download photos on her computer but it came up with the message incorrect usb. On coming home and connecting my usb port as usual, the camera gave a message on the camera screen which said ''usb'' and then lit up in green ''pc camera'' and the usual instructions for downloading did not come up on my

Assuming your camera is in perfect condition. remember that cameras come up with its own driver. your camera attatched to your friend's computer analyses only as plug and play feature. Always use card reader even to your computer by removing your mem ... Digital Cameras

Screen my camera turns on fine, but nothing shows on the screen. i fully charged the battery and it still doesn't show anything on the screen. you can take a picture, but the screen is still blank. when i tried to connect my camera to my computer it said connection fail!...does anyone know how to fix this?? or what's wrong at least?

The screen can be switched off to save power! Make sure screen is set to on position ... Sanyo VPC-E760 Digital Camera

Digital camera about 4 years old, take pics, they are on screen when reviewed, but when I put SD card in computer they do not come on the computer. Couple of days later, took more pics, put SD card in computer, they did not come on the computer, but the previous days pics came up. What is the problem? Tried connecting camera to computer via cable, turned camera & computer off to reboot, removed and reinstalled SD card, changed camera settings, still have a problem. I have done this procedu

Possible that the SD card is having errors, So take a scan on the card and confirm. Also check the card on another PC to confirm if there are images on the card. If not there can be errrors in the camera. It will be ideal to have another SD card ( bo ... Panasonic Lumix DMC-LZ3 Digital Camera

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?

Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

When I connect my camera to my computer, it appears to be empty. I have over 1000 photos on it which show on the camera screen, but the computer sees none. I have even tried downloading the drivers and 'Nikon transfer' package from the disk that came with the box. I am using windows xp. Why does my computer not read the camera? When I open the S52 folder in my computer, there are no files. When I then press 'get pictures from camera' it says that the camera is in use. What am I doing wrong?!

First of all, why on earth would you keep 1000 pics on the memory card? They are not meant for storage....they can be easily corrupted and you could lose your pics. You need to get a card reader and use it to download your pics. Then, format the card ... Nikon COOLPIX S52 Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?

Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

Hi. I have some pictures on my camera memory card which I want to download, but when I connect the camera to my computer, it only displays one picture old picture which should have been deleted long ago and none of the pictures currently on the memory card. I have just run the anti-virus program when I connected the camera, but no threats were detected, although I previously downloaded pictures on the same computers which did indicate a threat or virus at the time.

Instead of connecting the camera to the computer, use a card reader to directly transfer the pictures from your camera's memory card. It is easier and the card reader is a cheap device. It will work just like a USB flash device. ... Samsung Digimax S500 Digital Camera

When I connect my camera to my computer, I hook it up using an USB cable. This links the camera to the computer. But when I ask the computer to download the pictures, it says "camera in use please try again later". But the camere is not in use the screen just reads "USB". And I have to turn the camera on to get the computer to realize its there.

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Fuji FinePix S1000FD Digital Camera

For some reason now my computer wont recognise my canon powershot A560 -says something about connection.I use to get a window on view screen on my camera that i used to download pics onto computer via usb cable and now i only get a frozen picture on camera.Had usb cable and camera at camera shop today and they said usb cable ok as was connection in camera..Have tried all 5 usb ports on my computer..I have lost manual so cant remember exactly what im meant to do to download pics i dont really wan

Windows updates changes the registry and sometimes causes our "toys" to stop working. You can contact Microsoft and get instructions to re-write your registry(very dangerous if you don't know what you're doing) or, you can do what the pros do to avoi ... Canon PowerShot A560 Digital Camera

Uploading pictures i have the i832 digital camera in pink and i love it and all the pictures are taking fine but tonight i tried to upload pictures on my computer and usually it says connected constantly on the screen but it says connecting then goes black..it won't show up on the computer screen and im really upset its not my batteries

Try to reinstall the software's CD you received with your camera.\015\012\015\012Good luck! ... Polaroid i832 Digital Camera

Warning massage I am getting a warning message in the screen a soon as I turn on the camera E91-01. Also the flash will not operate. My Cyber-shot display screen suddenly started flashing E61:00.  I know this is the self-diagnosis display, but can't find any explanations for this code.  Also, today my computer doesn't recognize my camera when I try to import new pics.

I am having the same problem as well. The error message E:91:01 comes up and the flash will not operate. ... Sony Cyber-shot DSC-W90 Digital Camera

Hello, We've just bought a FInePix XP10 and can't get the camera to connect to our computer or TV using the supplied USB cable. Camera screen reads 'USB' which suggests something's happening but nothing appears on TV or computer screen?? Thanks, Mel

The camera's memory will appear as a disk drive in "My Computer" (Windows). You will find your images as files in a directory on that drive. I don't know about connecting to a TV- presumably it has a USB socket, so I imagine that it will access the c ... FUJIFILM FinePix XP10 XP11 Digital Camera

Whenever i plug my camera into the computer and wait for the 'new hardware' icon to pop up on the computer, my camera screen goes black and the screen says 'connection fail'. it has worked for almost a year, since i got it. what do i do?

Use a card reader instead of the camera from now on. ... Digital Cameras

I keep getting: The software is unable to find Olympus digital camera connected to a USD port on your computer . Would you like to search again? I have connected the cameriavia USB, the camera screen shows PC (etc) I choose PC and then the screen just sits on One moment.

Hi if cant find your software for your camera,\015\012may be you can try to get a external card reader\015\012that you connect to the usb and it will be recognized\015\012automatically,.\015\012hope that will help you ... Olympus Stylus 7010 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4777 seconds