Having problems with your Canon PowerShot A460 Digital Camera ?

No image display on camera mode

\015 Hi!need your help with my canon powershot A460!no image display or everything is black everytime it is on camera mode but I can still preview the pictures I took before that problem!Please help me!Thank you very much!\015

Answers :

There are different settings. You can view the past photos because you are using the viewer for that, but you have a setting off in the menu. You need to turn on view photo or preview photo after picture taken.\015\012I am not sure what it is in the Canon line, but look in your manual for the setting.
Repair Help & Product Troubleshooting for Canon PowerShot A460 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have 2 Sony cameras with problems..one is a DSC-T1..there is no picture when in the camera mode..will display pictures made earlier..lcd is blank in camera mode. The other camera is DSC-F717..Camera has hardly been used..in camera mode the lcd only shows a smeared image..the image is not recgonizable. Strange conicidence, but both failed nerly at the same time.


Hi kd4kdp,\015\012Both of your camera have bad CCD Imagers and must be replaced. Good news for you is that Sony will replaced these parts free of cost. Check more details on following Sony web link. Have nice day.\015\0121= ... Digital Cameras

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

S5000 - camera does not display images in 'review' mode - still stays in photo shoot mode


Defective ccd imager!! company will replace this ccd imager free of charge. Year 2002 up to 2005 released unit has a factry defect ccd imager. the company recalled these unit and replaced with a stronger version of ccd imager( they are still doing it ... Fuji FinePix S5000 Digital Camera

I HAVE A GR2 DIGITAL CAMERA. I usually shoot in manual mode and and set white balance manually using a digital callabration target. Yesterday afternoon, after shooting most of theday without problems, my images started appearing completely washed out with an orange cast. This cast also was all over my calibration target image. The image was unclear with stripes running horizontally across my display. This problem is present in all modes. Itried everything I could think of to resolve the matter


I doubt that formatting the card will do anything but, if you choose to do that, download any pics first since formatting will completely erase the card. Have you tried going back to "Auto WB" to see if your camera works properly that way? How about ... Ricoh GR Digital Camera

A85 Dead During a normal session, switching from picture-taking mode to view mode, the lens would not retract and the picture in the view froze with the current image. I could not turn off the camera. After a while, the batteries got very hot, so I removed them. I took out the CF card. Later, I replaced the batteries and the put the card back in. The camera worked very briefly, but the LCD view would not work, displaying flashing lines on a black background. New batteries didn't help. The camera


I read something about the fuse going out...http://www.dcresource.com/forums/archive/index.php/t-18151.html ... Canon PowerShot A85 Digital Camera

Sanyo Xacti VPC-HD1 The display screen is completely black when in record mode; both for still pictures and video mode - yes the lens cap is off. The camera display will play back images and video previously stored on the memory card, but does not display anything new that I have tried to capture since the problem occured.


... Sanyo Digital Cameras

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera

Importing Images Hi, When we take photos on our 500D we can preview the photos on the screen. When we place our Camera card into the computer and try to import the file they say that it is not a supported mode. Displaying the image number for example as IMG_0135.CR2 usually they will display CRW_0135. Is there a solution ?


The CR2 suffix means that the picture was taken in the RAW file format, a proprietary format. This requires that the images be processed by a software conversion to be 'readable' by the computer. The EOS Utility software that came with the camera wil ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

My SD800IS was working fine while in the very hot/humid environment of Yap. I took it out of my air conditioned room and went to take a picture almost immediately. The view finder, the LCD image and the lens were all fogged. The camera worked but took foggy images. Eventually the fog cleared and my photos were fine but most of the controls no longer work. I can change the selector knob that determines if the camera is on auto, manual, video or display modes but it won't zoom and the program


The foggy images and lens was due to condensation caused by the camera's surfaces being cold in a humid/moist environment. Usually this happens and goes away without issue. If you believe issues are continuing, consider placing the camera completely ... Canon Digital Cameras

Lcd screen is not displaying images in camera mode....


Hi,Its known problem of bad ccd imager in your Sony DSC-T3 camera and ccd imager will be replaced.Sony will repair it free of cost, click ... Sony Cyber-Shot DSC-T3 Digital Camera

I have a Sony DSC-F88 5.1MP camera... When you switch it on to any of the program modes - image dispalyed on LCD and photographed is distorted. Image is skewed with the edges of the image flaring with three colours to the edge. A kind of focus shift..low resolution image - sort of semi solarised picture. Any previous picture taken displays normal on the LCD... I have tried other memory sticks.. no change..


Your DSC-F88 has problem with CCD Imager and needs to be replaced. Good news is Sony will replace it free of cost. Click Sony Official ... Digital Cameras

My Ge A730 digital camera is acting weird. The instructions say to put the camera in USB mode to upload pics to my PC. Not only does my computer not detect the camera, but now, when I unplug the USB cord, the camera screen goes BLACK, and only displays the regular images I normally see when the USB cord is plugged in.


HI there, reset the camera from Camera Manu option first. Then Connect with your computer vuia DATA cable. After that install the camera driver from the disk. Then restart your computer & enjoy your photo transfering from Camera to comouter. Than ... GE A730 Digital Camera

No image display on camera mode


There are different settings. You can view the past photos because you are using the viewer for that, but you have a setting off in the menu. You need to turn on view photo or preview photo after picture taken.\015\012I am not sure what it is in the ... Canon PowerShot A460 Digital Camera

Playback problem my the camera is *istDS. with camera on, good batteries, a push of the playback button often does not display any images. The camera does not leave capture mode. Anyone experiencing the same. Ideas welcome. This "problem" will ocur when first turning it on when I think it should go directly to playback when button pushed.


This might sound stupid, but make sure your other fingers are no where near the shutter release. Sometimes I accidentally nudge it when in playback... ... Pentax *ist D Digital Camera

Images taken with a Samsung Digimax A 503 that were written to a SD card will display in tumbnail mode but can not be opened on the compter to be viewed or printed. Some images render partially, some not at all and a couple work correctly. Some images return an error "loading or one or more plug in failed. The plug in files might be corupt or not valid". Can you tell if it is a problem with the camera, SD card or a driver? Is there any way to recover the photos?


Hi, kindly get it downloaded here :\012www.nodevice.com/driver/.../Samsung/Digital_Cameras.html\012\012 ... Samsung Digimax A503 Digital Camera

WHEN CAMERA IS TURNED ON THE SCREEN WILL SHOW PAST PICTURES FINE BUT WHEN THE SELECTOR SWITCH IS MOVED TO EITHER TAKE A NEW PICTURE OR TO THE MOVIE MODE THE DISPLAY SCREEN IS BLACK WITH LIKE PURPLISH LINES IT WILL NOT DISPLAY THE IMAGE YOUR TRYING TO TAKE A PICTURE OF.


From your description, it sounds to me like the image sensor within the camera went bad. \015\012\015\012This can happen from a few things:\015\012\015\012\015\012Camera dropped\015\012Moi ... Sony Cyber-Shot DSC-T1 Digital Camera

Hallo, when I turn on my Lumix DMC-LZ2 the display is black, and the image appear only if I press or twist strongly the camera. In the review mode the stored pictures appear on the display without problems. Thank you.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-LZ2 Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Camera does not display image when in camera mode


May be the issue with CCD (image sensor device) of the Camera.Refer this article to cofirm this. http://esupport.sony.com/US/perl/news-item.pl?mdl=DSCT1&news_id=161Check whether the LCD screen of the Camera loo ... Sony Cyber-Shot DSC-T1 Digital Camera

In camera and movie mode my screen is now showing coloured wavy image and wont take a picture. In play back it displays previous images perfectly so cant be a prob with screen.


Hi,If its Sony DSC-T1 camera then its problem of ccd imager and Sony will repair it free of cost.Click Sony CCD Imager Suppo ... Sony Cyber-Shot DSC-T1 Digital Camera

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t


My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

Lcd does not show image when camera is in shooting mode, but does show image when displaying the storage card and menu screens


HI,\015\012\015\012THis is the problem with the CCD device,\015\012\015\012Your CCD is worn and you need to replace your CCD..\015\012\015\012Please rate this solution\015\012RNJ VINODKUMAR ... Canon PowerShot S2 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3087 seconds