Having problems with your Canon PowerShot A460 Digital Camera ?

Camera time and date needs reset evrytime I turn it back on?


Answers :

Sounds to me like the thin button battery that maintains memory and clock is rundown (or never been put in?). Put in a new battery!
Repair Help & Product Troubleshooting for Canon PowerShot A460 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera time and date needs reset evrytime I turn it back on?


Sounds to me like the thin button battery that maintains memory and clock is rundown (or never been put in?). Put in a new battery! ... Canon PowerShot A460 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

The date on my camera is reseting every time i turn it off and then back on again so it is asking me to enter the date every time I turn the camera on.


Next time you finish entering the information, press the set/ok (or whatever) button twice. ... Canon PowerShot SX110 IS Digital Camera

I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera

Blurry photos THe last few times I have attempted to use my camera I have had two problems. One, each time I turn it on it resets itself as if I have never used it and goes back to the language selection and and I have to reset the date (which I stopped doing because of the inconvenience every time I wanted to take a photo, so now all my photos say January 1, 2000). Also, every time I go to take a photo, the picture is blurry. I have tried to reset the quality, but it's not helping and, admitted


The problem with your camera is not that simple to correct. I can tell you that you can going to the setup menu and do a camera reset and see if that corrects it and if it does then great . I work on these types of cameras all the time and ... Casio EXILIM Card EX-S770 Digital Camera

Need to reset time and date every time I turn on camera.


You need to insert a new date/time battery. It's one of those flat disc batts that fits in a holder on the side of your camera. Look for a battery compartment cover on the right side of your camera with the lens facing you... it should come open with ... Canon PowerShot SX100 IS Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.


... Canon PowerShot S400 / IXUS 400 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Will not save date every time camera turned on and off date needs resetting


Time to change out the CR1220 battery that keeps the camera's time. It's located under the rubber flap on the left side of the camera (with the A/V and power inputs plugs). Just pry out its slide door with your fingernail, and take the little batter ... Canon PowerShot A520 Digital Camera

I Have to Reset The Date an Time Everytime I turn the camera on


The following is from the manual which you can download on the link below:\015\012\015\012http://world.casio.com/qv/download/en/manual/\015\012\015\012So it seems that you must either keep the battery charged or leave the camera connected to the USB ... Casio EXILIM ZOOM EX-Z60 Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

Date/Time Set I dropped the camera and now, when I turn it on, the date and time have reset to zero and I have to set it all again before I can take a picture. Is it in need of repair or is there something I can do?


I'm an imagining salesman at Circuit City and to tell you the truth I suggest just getting a new camera if you can afford it. This camera is well off in years. Most digital cameras aren't really meant to last too long. Don't get me wrong, they are ab ... Canon PowerShot A410 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Hi today i recieved my FujiPix S4000 camera, after putting in the date and time, it then pops up, turn off the camera and turn on again, which i have done several times, along with changing the batteries supplied with it to rechargeable ones like it says it only takes in the manual, i have also tried resetting it, and trying various sim cards other than the one supplied. Butr it keeps popping up everytime i turn it on.


... FUJIFILM FinePix S4000 / S4050 Digital Camera

I am trying to set date time in my camera(canon sx110is). But in every power on it is reseted. Whatever date i am setting in this camera is not stored in the memory. In every power on it asking for setting date and time. I need help in this regard.


You have to change the 'date battery'. Use the user manual to find its location.\015\012\015\012Mine is Canon A520, located beside the cable link sockets. Battery is CR 1220. ... Digital Cameras

I have a canon ixus 9515. It works perfectly apart from the time and date. It sets the time and date no problem and it does adjust the time whilst taking photos. However as soon as the camera is turned off the time and date resets itself to the original information put in


If the camera do not hold the settings ..it means the internal battery is faulty and need to be changed..(equivalent to a bios/cmos battery on computers....it is just a small size battery designed to power the memory for the settings when the batter ... Canon Digital Cameras

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?


Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

Is there a small battery somewhere that keeps track of the date and time? Every time you turn off and then turn on the camera, you have to reset the date?


... Polaroid A500 Digital Camera

AF problem Last week I took some pics that needed the flash turned off. I did that and took the pics with no problem. I turned the flash setting back to "auto" afterwards. (this may not be related to the current problem but does seem too much of a coincidence). Next time I went to use the camera, I got an AF(red dot) and a red hand on the screen. It would take one picture and then would be frozen (no zoom, no picture taking, but the screen would stay on). If I turn it back on I can then ta


Jangles,\015\012\015\012I am having the exact same problem. Have you found a fix ? ... Nikon Coolpix 5600 Digital Camera

Relatively new canon eos 60d. Was taking multiple pictures in a group setting. Received an error that the lens and the camera were not connected well (I receive this from time to time, need to buy a newer lens). Usually, I just turn the camera off and then back on and it works fine. This time, the view through the viewfinder is very dark and it will take no pictures of any kind. Tried everything I know- no luck.


Hi,\015\012What lens exactly are you currently using? Have you tried cleaning the contacts on the lens as well as resetting the camera? ... Canon EOS 60D Digital Camera

I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.


Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Have to reset date every time I turn on camera.


You need to replace the date battery. It's a button-type battery (CR1220) which is in a holder near the regular batteries. After you pull the holder out, place the new battery into the holder with the negative side up, and slide it back into its slot ... Canon PowerShot A400 Digital Camera

The date and time fuction on my G11 keeps resetting back to '0' when I turn it on resulting in me having to reset which in turns opens up another file to store the photo's in for that shoot also the photo numbers are repeated although the filing is set to continuous. Any ideas??????


The next time you enter the date and time info, press the set/ok button twice. ... Canon PowerShot G11 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6610 seconds