Having problems with your Canon PowerShot A470 Digital Camera ?
Camera not staying on LCD display message.
\015 My batteries went dead while the camera was on and now with the batteries recharged when I tun it on it displays please restart camera. I have only had this camera since March 2009. When I turn it off and then on again the lens move and then began to act as if it is jammed. It keeps making a beeping noise.\015
Remove the batteries and externally recharge them . Sometime batteries , in some cases can have a polarity change but then the camera may just not turn on.
Repair Help & Product Troubleshooting for Canon PowerShot A470 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Camera not staying on LCD display message.
Remove the batteries and externally recharge them . Sometime batteries , in some cases can have a polarity change but then the camera may just not turn on. ... Canon PowerShot A470 Digital Camera
About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera
Lens assembly The lens assembly has become loose. One of the outer rings has actually detatched from the camera body.When switching on - either the message 'lens fault' is displayed or a very blurred image is displayed in the LCD. The camera shop reckons the problem is quite common and estimates $A200 to fix ie replace lens assembly. Any similar experiences? (Of course, the camera is 3 months out of warranty).
"Lens Error" requires to be sent into repairs. ... Casio Exilim EX-Z40 Digital Camera
Lens -------------------------------------------------------------------------------- A friend has a Nikon 5700 (almost new) that has the following problem: When you press the shutter release, after the autofocus, the camera send the message "E r r" in the viewfinder display and in the top LCD display, and does not take the picture.beside it give on the monitor a message problem with lens does anybody have information about this problem? or do you have any idea where to ask about? Th
If it is almost new the thing to do is to reurn it to the vendor .\015\012Check out the situation with Nikon customer support. ... Nikon Coolpix 5700 Digital Camera
Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's
The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera
When I push the power-on button the LCD display briefly flashes on with the "Pentax Optio" screen and then switches off. The lens is stuck half-way open, and the camera will not stay powered up. The battery is fully charged (as well as the backup battery) so that isn't the problem. Is there a "camera reset" procedure for this camera? Other ideas?
Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fix ... Pentax Optio A10 Digital Camera
Kodak EASYSHARE v1253 Overheat Error when turning camera on. Lens extends and stays out, LCD pops up with message "Camera overheating, shutting down" Anyone know any fixes?
Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101;';;''; ... Kodak EASYSHARE V1253 Digital Camera
Lens error, restart camera.......... that's the reading I get on the lcd display. after I restart the camera the message just appears again. please help!
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
E:91:01 hello friend I saw your reply for the e:91:01 flash error. I'd like to ask you if those steps are realy working, i dont have the camera with me right now to test it. but i will do it when i get home later in day. I have a DSC-W50 that now blinks that error. Before this error i had 2 others but i fix them. firstly: while i was turning ON the camera ...lens where comming in and out for 3 times, and message was displayed on LCD that i cant remember right now. Solution: .. i disassembled in
I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think t ... Sony Cyber-shot DSC-W50 Digital Camera
I own a Sony Cybershot DSCW350 and when I put my sony memory card in, the camera on/off button, settings buttons, and shutter button stop working completely and the lcd portion is the only part that stays on. The memory card will not read in either my card reader for the computer or my camera (earlier it gave a reinsert memory card error, but after cleaning it with a pencil eraser and soft cloth as Sony tech assistance suggested, fter cleaning it the error message stopped coming up completely it
You might try to re clean the card with a smooth cloth that is used for cleaning DVD`s also clean the slot on your camera... sounds like you might have got something on the card or in the camera slot.. you can also trying cleaning them with a little ... Sony Cybershot DSCW350 Digital Camera
Camera displays message "internal memory error" on lcd when turned on. No functions can be used. Camera is a Sony T2
The internal memory was corrupted for some reason, all you have to do is get the memopry formatted. please refer to Sony's site for more information\015\012\015\012 ... Digital Cameras
My panasonic lumix dmc-lz7 camera is not functioning. It turns on the zoom goes in and out and then displays the message "please turn camera off and on again" after doing this the zoom stays out. Turning it on and off again does not get it to work. Jessica
Battery might be weak and needs a replacement or there is improper shutting down. ... Panasonic Lumix DMC-LZ7 Digital Camera
I just bought a nikon D3000 ,the shots displayed just fine on the camera & the computer , but a week later i was looking at the shots on the camera LCD some of the shots were gone & have this message"file does not contain image data ", but they open just fine on the computer.
Did you remove the card and insert it into the computer? Then, when you were finished, did you forget to use the "safely remove hardware" function? ... Digital Cameras
Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser
... Panasonic Digital Cameras
ZOOM ERROR An error message "ZOOM ERROR" is displayed when switched on . Their is an sound from the zoom gears . unable to Zoom in or Out. It was drop down from 3ft height. I think an error with the cambarrel, shutter.... Any solutions or the cost of this spares.???? Camera dropped and has a very slight dent near batteries. LCD displays 'Zoom error' and shuts down. Any help?
Did you take it apart to look at the mechanism? Definitely sounds like something is broken or out of place. \015\012\015\012KEH.com is a well known repair house that may be able to give you a good estimate. \015\012\015\012 ... Olympus SP-550 UZ Digital Camera
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .
Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera
I have a swing-out LCD display on my powershot camera when opening the LCD display the image appears upside down how can i resolve this? there were never problems in the past.. when closing the lcd display on the back of camera with the display face-up no image shows..i would really appreciate help to resolve this problem as i'll be going on holidays soon..thankyou..Anna
The camera requires partially dismantling in order to fix this. if you cannot do it yourself then you will have to take it somewhere but be warned it wont be very cheap. If you live in new zealand i could do it for you however unlikely that is. ... Canon PowerShot A85 Digital Camera
I have (2) DGS-200 Moultrie cameras that the LCD display has gone out. Replaced (1) with the LCD display from a Moultrie 100. Worked great but I still have two cameras that can't be programed without seeing on LCD. Is there anywhere to purchase these LCD screens or purchase non-working Moultrie cameras?
WWW.MOULTRIEFEEDERS.COM WILL SEND REPLACEMENTS AND INSTRUCTIONS FOR FREE.... ... Moultrie MFH-DGS-100V2 Digital Camera
I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln
... Olympus Digital Cameras
Panasonic dmc-fh22 camera when turned on displays a system error (zoom) message on the LCD
Hi,System error zoom message shows some thing wrong in lens mechanism and it is not user level repair/ fix.Camera will take apart, lens assembly will be replaced to resolve the issue and all that process need expertise of qualified camera ... Panasonic Lumix DMC-LZ2 Digital Camera
Okay i got pepsi in my camera, so now when i put batteries in the green light turnson and stays on but nothing is displayed on the lcd.
There is nothing you can do. You've just got a sugary acidic liquid into your camera which has presumably partially dried by now.Even if you could remove the sugar residues (difficult:you'd have to soak parts the camera in distilled water ... Samsung SL30 Digital Camera
We have a CoolPix L3 that is not very old nor has it been used (and or misused); perhaps 14 months old. Serial No. 30649827. The telescoping lens has tended to get stuck in a closed position. After installing FRESH new batteries, I gently tapped the camera body against my other hand and the lens opened but continued to move in and out. Sometimes it would stay open but not at its maximum position. Furthermore a message was displayed; LENS ERROR.What do you suggest we do. Is it repairable?
The lens has to be unlocked, thereby meanig that we need physically open the camera and check the three rollers which control the lens movement inside the camera. ... Digital Cameras
System Error The message "system error" and error code 32O keeps flashing on the LCD display. According to the owner's manual, the solution is to switch the camera off and then on again. This did not work so I removed the battery a few times. That didn't work either. Can anyone solve this?
Hello,\015\012If you have little knowledge of electronics hardware, then open the cabinet of camera and pull out every flexible connection cable and reinsert them. I would like to advise you to pay full attention while doing so, because these f ... Sony Cyber-Shot DSC-F717 Digital Camera
Zoom error? Hello,The camera shoot (lens) will not open and extend, it stays shut, likes it's stuck or something. I think it just may be broken now, but maybe not. On the LCD it displays "Zoom error". I tried brand new batteries, neg. Is there hope? Could you call me or email me?Phone: 360.652.5409Email: email@example.com-Ruben
Give it a little wiggle ... Fuji FinePix A350 Digital Camera