Having problems with your Canon PowerShot A480 Digital Camera ?

Makes a horrible noise and says "lens error Restart camera"

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot A480 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Makes a horrible noise and says "lens error Restart camera"

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot A480 Digital Camera

Lens Error I dropped my camera and now when i try to take pictures the camera says Lens Error and makes a clicking noise. it also says to restart the power, but when i do, nothing happens..HELP! ASAP!

What do you do if it's a lens error? ... Casio Exilim EX-S500 Digital Camera

Lens error my camera was a bit blurry so i used my shirt to wipe a bit of it then when i shut it off the lens got stuck and now when i turn it on its says "lens error restart camera." but every time i do its still stuck and makes a buzzing noise

The lens has probably got something in the retraction mechanism that is stopping it retracting. This can be something as simple as sand or grit or as a result of a drop or knock. In most cases the camera will need to be stripped apart to remove the l ... Canon IXUS 80 IS Digital Camera

My camera is making a grinding noise before saying lens error restart camera, just wondering is therte a button i press to restart the camera. My camera is a canon ixus 80IS

Press the start button twice then it should work, ... Canon IXUS 80 IS Digital Camera

Lens error my canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera?? i'm currently overseas and although my camera is within warranty, i cant possibly send my camera back to the original country for repair. is there any DIY method?? i'm an amateur at cameras so i do not wish to try any method that may further make the problem worse. thank you for your h

This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon IXUS V2 Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.

I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

When I turn on my camera, it says 'Lens error. Please restart.' and then the lens makes a funny noise and turns off

HiWhat you are seeing is a generic stuck lens error message and obviously you didn't cause it as you said it was already happening before you tried to clean the camera and get it working again.\015\012Your lens needs to be cle ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Canon SD900 My lens is stuck out, and everytime i try and turn on my camera it makes a grinding noise and then reads on the screen, "lens error restart camera" How do i restart the camera? And how do i make the lens not stick out if the camera is off? Thanks for your help!! C

First off, see if Canon can help you. If not, the following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012 ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

Try to start up camara ,it makes a ticking noise and then it say lens error , restart camera>>

Good Afternoon,\015\012\015\012First let me say that the camera you have is a fantastic device, and one of my favourite point and shoot cameras!\015\012\015\012Unfortunately what you're experiencing is the "far too common" issue with Cano ... Canon PowerShot SD870 IS Digital Camera

The lens will not retract. A message says "lens error, restart camera," but the camera will not restart. The camera is a Canon PowerShot S3 IS. I can hear a "whirring" or motor noise when I try to start it, but the lens will not retract and it will not take photos or allow you to review photos. Batteries are just fine. I imagine it's the gears, but I wish I could have it repaired for not a lot of money.

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S2 IS Digital Camera

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?

If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera

My camera is in great condition and I'd hate to spend the money to get it fixed. It seems like everything else is working except for the lens...which is a big one! It never reads "ERROR" its just that the lens will not focus. It makes a noise when it is turned on like it is trying to focus. Even when I slightly hold the shutter button it makes a strange noise trying to focus but cannot. Any ideas of what I could do? I have air dusted it, gently pulled and twisted lens, restarted and recharge ba

First of all...stop telling yourself the camera is in great condition...obviously it's not. Now, try these:\012Fixing a Lens E ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

Focus error I am from the Caribbean Island of St.Kitts and I was on holiday in London, England in August 2006 and I bought this camera. It worked wonderfully and I took plenty pictures. I had no problems at all with it until now. When the camera was turned on there was a sound coming from the lens area. The lens are open and will not close. On the screen there is the warning display "focus error." Can I get a solution to fixing this problem Screen says focus error , makes noise.

Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Fuji FinePix A500 Digital Camera

Lens error i dropped my camera and the inner lens went in but there is a small circular part surrounding it that came out all little bit. i turned on my camera and it says lens error and makes a weird noise

If it is a canon than your lens is probaby uneven on the inside, If it is another brand than when the lens come out try to hold it out ... Digital Cameras

Lens error,restart camera, makes noise

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD890 IS / IXUS 970 IS Digital Camera

Lens problem The lens on my cannon powershot A1000 will not open. When I try to turn on the camera it makes a buzzing sound like it's trying to open and then a message comes on the screen saying lens error restart camera. This camera is pretty new so I'm not sure why the sudden problem.

You should have dropped your cam down to the floor or you should have forcibly tried to put your lens inside when the servomotor lens tried to bring the lens out..take your camera to the nearest service centre..you should not try to open the cam sinc ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

At first when turn on the camera and the lens got out but the camera dosent work and know y cant closed. still out always. The camera make a weird noise and dosent close the lens.the screen show:"lens error, restart the camera"

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Canon PowerShot SD1100 IS Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

LENS ERROR When I turn my camera on it says lens error and shuts back off. During this process it makes an awful noise and the lens will not come out.

Try the procedures in this tip. ... Pentax Optio 60 Digital Camera

Was taking pics last night at Disney World, went to put camera away & the lens would not go back in. Tried putting fresh batteries in and still nothing. Today tried again & camera comes on saying Lens Error! It's making a noise like it's trying to go in but nothing. Also nothing else working on camera either. Any suggestions please.

Get a can of compressed air, attach the included straw, aim it at the crevice where the body and lens housing meet. Now give it two or three good blasts and power the camera at the same time to see if the lens retracts, if not! take the ... Nikon COOLPIX L18 Digital Camera

Lens won't retract and when I try to turn the camera on, there is a clicking noise and then it says lens error, please restart camera. I assume something is jamming it, what do I do? My camera is a Powershot SD750

You are spot on. You've just diagnosed your own problem. Now, what to do about it? Number one, DO NOT do as some "person" on certain forums suggests Bash it on a hard surface.\015\012\015\012Either you or someone else has given the lens a ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Om my display is the camera saying: lens error restart camera I put on my camera and now i cant get my lens get in and every time i set on the camera it is saying lens error restart camera. I have also loaded my battery. my mailadress

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon Rebel XT / EOS 350D Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera

\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

When turning on the camera it makes strange noises (autofocus motor is trying to adjust) and the LCD-screen stays black. When turning off the camera the same noise sounds and ths LCD-screen says "lens error" I have tried taking out the battery for more than 24 hours, didn't work!

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Casio Exilim EX-Z77 Digital Camera

I take a few shots and get the Error message 30 on my 50D- Always need to shut it off and then back on. Since I did soe net surfing, and since the camera makes a clear noise whn it goes into error mode, I am thinking it is surely a shutter problem. Anyone there confirm that it is a shutter problem? Note I was using a Sigma Lens at the time, so the little boys at my local shop are saying it is "not" the camera...of course it is still in warranty. I am looking for any HELP or ADVICE! Tony C

HelloThe problem is that the lens has become stuck in the barrel\015\012 after dropping it. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.Use\01 ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5365 seconds