Having problems with your Canon PowerShot A480 Digital Camera ?

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?


Answers :

If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag. This causes a lens error. Try these:\012Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot A480 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?


If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera

Lens error!!!! my canon s515 is less then a year old, and i was taking pictures when the camera said it had a lens error. I restarted the camera and it stayed on the welcome thing and the lens squeaked and just went back and forth. HELP!!!!!!!!


When i turn on my camera the lens comes out ,then goes back in saying theres a lens error.it tells me to restart my camera but im not sure how too. is it just turning it back on ,or is there a reset button? ... Canon PowerShot S5 IS Digital Camera

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

Have had the camera about a year.... today took a picture with it and screen went black, the camera froze up (zoom lens stayed out didn't close). I have put new batteries in it.... the green light comes on on the back but the lens stays out.... the screen stays black. When I hold down power button to turn it off it quacks like a duck and goes off.... Please help!!!


This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. No point in reinventing the wheel!Stuck lenses are probably ... Polaroid i830 Digital Camera

My camera was working fine all day yesterday. I took a picture and then i placed my camera back in my purse. After a long while i went in my purse and saw the lens outward like if it was on and there is no possible way to make it close back. Its frozen. Please help. Thank you!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Samsung BL103 Digital Camera

Lens error and the camera restarting doesn't fix it.I took pictures and the lens didn't go back in when I was done and turned the camera off.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot S3 IS Digital Camera

Two things....my approx.18 month old battery died and i bought a replacement yesterday. is this the normal life expectancy? 2nd. Today, with a totally charged battery, I took eight pictures. Later I wanted to review the pics and when I pushed the on/off button, the lens came out but no image appeared. I could not shut off the camera, so had to pop the battery out. I am not sure now if the lens went back in. I pushed the on button again and the lens moved out; the display lit up with the message


To answer your questions, depending on how much use, (meaning how many snap shoots) will dictate whether your camera has reached its life expectancy. The proper procedure for long life with the battery is to have it totally drain out be ... Kodak EasyShare M1033 Digital Camera

Battery? I just purchased the camera last night. Installed the included batteries, took a few pictures. When I put the camera into auto macro mode, set the resolution to super fine and try taking a picture, the camera shuts off and will not come back on. The lens is still extended from the camera. The same thing happend last night, without the super fine resolution. I took out the batteries and put them back in and the camera functioned normally. But today it will not come back on. A


I just got mine today, and the batteries were dead withtin a couple of hours, so yes.\015\012\015\012mines has decided to go black, it was fun while it lasted,, theres \302\24390 ill never see again ... Samsung Digimax S500 Digital Camera

Gone? I had my memory card in a ready hooked up to my computer. I took several pictures off the card and saved them to my computer. But I left several pictures on the card. I put the card in my camera and got a no image message on my camera. I took the card out put it back in my computer and was able to view the photos. I but it back in my camera and there were still not available. So I went to the menu of my camera and selected the format card button. Now it says my card is empty. Is there anyw


Buy a memorycard reader and stick it in the computer. not by usb cable on the camera\015\012\015\012then\015\012\015\012You might use a program like ontrack easy recovery.\015\012choose data recovery then formatrecovery. ... Canon PowerShot A410 Digital Camera

Last friday i took some pictures and transfered them to my pc as i have done for the last 18 months. Over the weekend i took some more pictures. I went through exactly the same routine in connecting he camera up to the pc, when i switched the camera on the pc froze. I had to switch off by holding my finger on the off switch for ages. I restarted my pc and tried another usb port, same thing happened, and i repeated this on every usb port. Went out and bought a memory stick (i think thats what its


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... FUJIFILM Finepix S1500fd Digital Camera

I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.


Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I took a bunch of pictures and went to put them on my computer, when I inserted the memory stick into the computer it only showed half the pictures on the memory stick, so I put it back in my IR 500 and the pictures were still there, but then suddenly my camera went blank and when I turned it back on my pictures were all gone and when I put the memory stick into my computer it's now showing a bunch of random folders that won't open..These pictures are irreplaceable, please help me figure out how


Removing the memory stick without using the "safely remove hardware" function is probably the cause cause of your problem. The pics are still there but you need a 3rd party machine to read them. Go to a Walmart and plug the card into one of their pic ... Olympus i:robe IR-500 Digital Camera

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???


Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

My camera has been on a easyshare dock a very long time. One time when the dock was unplugged, I plugged it back in, and put the camera on it. It had a blinking red light, which is had never shown before. I upplugged the dock and replugged and put the camera back on. It seemed fine, but Christmas day when I wanted to take pictures with my camera, the zoom lens would not work, and then I couldn't view the pictures anymore. My husband went and bought a new battery, we put it in, and put it on t


Terrible time for a camera to fail, sorry. It sounds like the dock might be bad, and failing to recharge the new battery. The old battery may have been at the end of it's life, also.\015\012Other problems can cause these symptoms, which ca ... Digital Cameras

Card Error Hello. I am having a problem with my camera reading my card. My card was working fine. I took the card out to have the pics saved onto a disk. When I put my card back in my camera it first said that the card was full but it would not pull up any pictures. So I panicked because I thought I had lost all my pictures and I went back to Target and checked out my card to see if it still had pictures on it. It did....so I saved all the pictures to a cd and I was then going to delete th


Appears to have bent pins ... check the slot.. should be two even rows of pins ... Olympus EVOLT E-500 Digital Camera

I have a canon powershot sd1100 IS and bought it on ebay back in the fall. I havent had any problems and it was in great condition. One night I went to erase some pictures before going out- the camera was fine. About an hour later, I took the camera out of my purse and when I turned it on I saw the screen was white whether I went to take a picture or view one. I can still take pictures and load them on my computer but I can't see what I'm taking because of the white. Is there a way to fix this?


... Canon PowerShot SD1100 IS Digital Camera

Lens it had a low battery light, then after taking last picture, the screen went blank and the lens stayed out. when i hit the on/off button it says on the screen, lens error, restart camera? how do you restart camera?


MIne is doing the same thing. I'm pretty sure in my case it is because sand got stuck behind the lens and the lens can't retract properly. ... Canon PowerShot A460 Digital Camera

Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth


TIPS:1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!..to fix this... ... Olympus FE-230 Digital Camera

I turn the camera on and the shutter opens but i have a black screen to look through.when i go back to look at some of the older pictures the screen comes up with no problem.the last time i was usuing the camera i took about 10 pictures,the last picture that i took came up very blurry and then the screen went out?


Try resetting the camera to default settings. The option should be available in the Menu. ... Sony Cyber-Shot DSC-S40 Digital Camera

I have a Canon PowerShot S5 IS, and a few months ago I started getting a lense error whenever I went into phototaking mode. Every once-in-a-while when I went into the "view pictures" mode, the lense would retract itself, but when I tried to take pictures again, the lense would go out and "lense error. restart camera" would appear on the screen. A few weeks ago I finally got my camera fixed at a shop. I got the camera back and used it for about a week, now the same problem is happening. I've


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot S5 IS Digital Camera

I have a Sony Cybershot DSC-W30 camera. This morning, I took a picture of my daughter, and turned the camera off. Right when I was turning it off, she asked me if she could see the picture, so I quickly turned it back on again, and now it is stuck. The lens is stuck out and the power off, and it won't do anything. I have tried taking the battery out, and putting it back in, nothing. Anyone have any ideas??


MY LENS IS ALSO STUCK OUT. I pressed on the lens by accident while it was on. Now it won't turn on and the lens is stuck out. I tried twisting it left as recommended by aplynn09 but didn't work. SOMEONE PLEASE HELP!!! ... Sony Cyber-shot DSC-S700 Digital Camera

AF problem Last week I took some pics that needed the flash turned off. I did that and took the pics with no problem. I turned the flash setting back to "auto" afterwards. (this may not be related to the current problem but does seem too much of a coincidence). Next time I went to use the camera, I got an AF(red dot) and a red hand on the screen. It would take one picture and then would be frozen (no zoom, no picture taking, but the screen would stay on). If I turn it back on I can then ta


Jangles,\015\012\015\012I am having the exact same problem. Have you found a fix ? ... Nikon Coolpix 5600 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

The lens on my sd600 won't open when I turn the camera to picture taking position. Screen goes black and message says ''lens error, restart camera''. I have to go back to view mode and then turn camera off and on again in order for partially opened lens to retract fully and close.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5068 seconds