Having problems with your Canon PowerShot A480 Digital Camera ?

When turning on and off canon powershot a480 lens gets stuck and when turing off asks for reset camera how do i do this


Answers :

Fixing a Lens Error on a Digital Camera
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot A480 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When turning on and off canon powershot a480 lens gets stuck and when turing off asks for reset camera how do i do this


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Canon PowerShot A480 Digital Camera

I dropped my Canon Powershot SD750 digital camera and the extended lens was stuck open. I had no other options so I opened the camera up to fix it. I corrected it, but after I put the camera back together it takes poor pics. In normal light conditions it over exposes and pic looks really bright and also has many lines going through the picture? I love the camera and don't want to buy another one. I tried a different memory card and reset function under the menu.


Hi.You have damaged either the lens or the CCD sensor , located behind the lens, inside the camera.The camera must be taken apart by a technician to fix the problem.to get a quote on repair, try contacting Canon at ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My frind dropped my camera and my lens broke. It is a canon powershot SD600. When i turn it on it says lens error, press reset button. lens is stuck slanted-ly.it also is blurry wen u c the screen. "my friend" doent want to pay for it , so where can i go fix it and how much would it cost ?


Hi Dear,As we can see from your description of your problem. The issue is related to misalignment of the lens. As the lens is stuck it will not come in and out smoothly. And also as you have said the camera lens is broken. Hence, the best ... Canon PowerShot SD600 Digital Camera

Lens error. how do i reset camera - Canon PowerShot A480 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot A480 Digital Camera

Asking to reset camera as has lens error - Canon PowerShot SD550 / IXUS 750 Digital Camera


HiWhat you are seeing is a generic message that means there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears.A couple solutions would be to eith ... Canon PowerShot SD550 / IXUS 750 Digital Camera

Lens will not reset keeps shutting off - Canon PowerShot A480 Digital Camera


Hi.That is a lens error.The lens are stuck open either because of a mechanical problem, because of dirt and dust, or because the motor has failed.In some case a faulty control board can cause same problem.Try ... Canon PowerShot A480 Digital Camera

My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.


Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?


Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

I put my camera in my backpack and the lens got stuck, it won't come out at all. When I turn the camera on it says "Lens error, restart camera". I've tried everything this site said to try but nothing has worked. My camera is a Canon Powershot A560. Does anyone know how I can fix it? Please Help!


Try these procedures. ... Canon PowerShot A560 Digital Camera

My canon powershot a590 camera lens is stuck. When I attempt to start my camera I get a message saying Lens Error Restart Camera then the camera immediately powers off.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot S2 IS Digital Camera

Hello, I have a digital camera CANON PowerShot SD790 IS IXUS 9015. The lens started to come out as I turned the camera on and nothing was blocking the camera when doing so. But, suddenly it stopped and the lens is stuck and I can't get the camera to work. Please help. Thank you!!! Kristina.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Each attempt I ensue to power on my camera and error displays on the screen saying "Lens error, restart camera". How do I do this for it to be successful? The Lens will not retract and is somehow stuck, what am I doing wrong with the item. It is an A480 Canon camera.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot A480 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Lens barrel is stuck in the out position on my Canon Powershot SD1100 IS. Error message reads: "Lens error, restart camera". To my knowledge the camera has not been dropped and the barrel seems to be properly aligned. Any suggestions would be greatly appreciated. Thanks


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1100 IS Digital Camera

I have a canon powershot SD 1000. The lense is stuck out. When I go to turn on the camera it says "lens error, restart camera". I don't know how to do this or how to get the lens back it. Help?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1000 Digital Camera

Hi, I have Canon PowerShot A95, Digital Compact Camera, when i switch on the camera it will beep a few times and the LCD will display a little E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off. would be great if you could provide some advice for rectifying the problem. thanks


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Canon PowerShot A95 Digital Camera

Canon Powershot SD600 (elph) won't start. Error code "lens error, restart camera". Restart does not clear message. Removal battery does not help. Lens cover can be openned manually. Is there a way to "reset" this camera? Thanks.


Hi\015\012 What you are seeing is a generic stuck lens error message:\015\012\015\012Your\015\012lens needs to be cleaned, repaired or replaced. There are online places that will do it for a\015\012decent price and there are o ... Digital Cameras

White photos canon A470? i have a canon powershot A470 camera and there's a problem taking photo.. whenever i take a picture, it's either fully white or have white stripes on the pictures.. i thought it was the lens problem but the camera has no problem shoot a video.. i also try the factory reset but no use


I had this problem too, I think it's the shutter problem, it doesn't closewhen a picture is taken, therefore, causing the over exposed photo...I've sent it back to canon, still waiting for the reply...Kevin - Malaysia ... Canon PowerShot A470 Digital Camera

Canon powershot sd1100 1s lens is out of focus. This happened after there was a "lens error, restart camera" in which the lens was stuck. Once the lens finally went back in and was working properly the lens was then out of focus


... Canon PowerShot SD1100 IS Digital Camera

Turn camera on (Canon Powershot A480 digital), logo comes up, then it says LENS ERROR RESTART CAMERA. However, when restarting camera, same thing happens


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A480 Digital Camera

I have A Canon powershot A2200 HD Digital camera And the lens is stuck! Could you tell me how to fix it?


Try the procedures in this tip. ... Canon Powershot A2200 14.1mp Digital Camera red

I have A Canon powershot A2200 HD Digital camera And the lens is stuck! Could you tell me how to fix it?


Try the procedures in this tip. ... Canon Powershot A2200 14.1mp Digital Camera red

Canon powershot sd 800 lens stuck - Canon Digital Cameras


Did it get stuck due to a fall or all of a sudden..? if it is due to a fall.. try having a look at the lens at an angle of 360... to see if at any instant u see a slight droop.. u can try to adjust it with ur hand technically... else remove the batte ... Canon Digital Cameras

Lens is stuck on camera.  it won't retract - Canon PowerShot SX100 IS Digital Camera


This is an entirely hardware issue......Please immediately visit any nearest service centre... ... Canon PowerShot SX100 IS Digital Camera

Greetings, I have a Canon Powershot A640 and my lens won't fully open when I turn the camera on. It only opens slightly and appears to be stuck. Is there an easy fix for this? Everything else is working. I can take pictures but obviously am only getting a slice of a photo where the lens is open. Thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A640 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5412 seconds