Having problems with your Canon PowerShot A50 Digital Camera ?

My camera not working and not displaying any thing. not blinking any led


Answers :

Try the following:
\015\0121). Check batteries whether they are fully charged.
\015\0122). Check with Battery terminal are clean. You can clean them with a ear bud using some alcohol or spirit. Wipe the battery terminal with a clean dry cloth.
\015\0123). confirm that the memory car slot/battery cover is securly closed.
\015\0124). Reload the battery several times. This will also remove poor contact between camera and battery terminals.
\015\0125).Check battery are loaded in the correct direction.
\015\012
\015\012If the probelm persist, you might need to take it to the service center.
Repair Help & Product Troubleshooting for Canon PowerShot A50 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera not working and not displaying any thing. not blinking any led


Try the following:\015\0121). Check batteries whether they are fully charged.\015\0122). Check with Battery terminal are clean. You can clean them with a ear bud using some alcohol or spirit. Wipe the battery terminal with a clean dry clo ... Canon PowerShot A50 Digital Camera

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.


... Canon PowerShot A400 Digital Camera

Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?


Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera

Lcd display not working.nikon p500 went into watrefalls.. after putting it into ricebag for few days ( service center guy told it can t be done) after few days i could switch on camera , and could take pictures from view finder, lcd display seem to be not working.. any thing advisable to make work? can i go for new lcd, if so how much it would cost..


Yes you can replace it You must to do the decission replace LCD vs New camera. Call or go to NIKKON and ask them where is difference in cost Sometimes replace is cheaper that to buy. Other is better to buy that replace specially in USA.God bless ... Digital Cameras

Vivitar 8225 camera wont work its showing a screen msdc and a red led, manual says green led, cant get any thing else to work etc, and the red light is static, any ideas the vivitar website is **** no help there


Got this camera for Christmas- dumb disc user guide wont load- HOWEVER i found online source- downlaodable user guide\015\012 ... Digital Cameras

I am having problems with the flash working on my camera. It does not seem to matter if it is in automatic or manual modes. When I take a picture in either mode, when a flash is needed, the flash icon just blinks on the display. The camera will not take any photo when this is happening. The only way I can get my camera to take a photo is manually set the flash to off. Why is this happening?


Please reset camera through Reset option in Menu. This will set camera on default settings and any glitch in settings will be removed.Thanks. ... Canon PowerShot SD870 IS Digital Camera

Battery compatibility battery is fully charged when it was replaced after charging the camera display says ' for use with compatible battery only' this is the original battery and has not been replaced with a sustitute.My husband has the same model camera and i have tried his battery but it still says the same thing, also i tried the battery from my camera and it works perfectly fine in his.


There's not much you can do about the problem because the problem is inside the camera. A faulty component is probably the cause. (I think its receiving more or less that the needed amount of power so that's the error with compatibility)If stil ... Sony Cyber-shot DSC-W55 Digital Camera

The camera won't focus or zoom in and out. It feels like the lens drive machanism is rough when it turns on. When you try to focus in or out the led display between the camera and play buttons blinks and then the camera turns off.


A couple of suggestions:\015\012Try resetting all features back to the default. Your manual will show you this if you can't find the settings on your camera.\015\012if that doesn't work, this company does great repairs: ... Olympus FE-280 Digital Camera

The camera is suddenly not working. Battery was fully charged. It turns on and orange light blinks near the play button. screen does not display anything. after some blinks it then turns off.


This is due to the software errors of the camera ... Olympus FE-330 Digital Camera

E:91:01 hello friend I saw your reply for the e:91:01 flash error. I'd like to ask you if those steps are realy working, i dont have the camera with me right now to test it. but i will do it when i get home later in day. I have a DSC-W50 that now blinks that error. Before this error i had 2 others but i fix them. firstly: while i was turning ON the camera ...lens where comming in and out for 3 times, and message was displayed on LCD that i cant remember right now. Solution: .. i disassembled in


I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think t ... Sony Cyber-shot DSC-W50 Digital Camera

Pentax, 12megapixels (7.9mm, 23.7mm). camera turns on and will take a picture, but i cannot then preview the picture and the orange light next to the LED viewing screen will continue to blink. At this point, no other buttons work (for example, i can't pull up the menu or zoom the lens), its just frozen. holding down the "on" button will turn the camera off, but nothing gets solved.


... Aqua Pentax Optio S12 Digital Camera

Hello there, i have had my tz15 for 18 months and have never had a problem it until now. I taking video at the time and then I went to zoom in and the lens started to do so maybe 1x, hesitated then retracted back into the camera as if it had been turned off and a message displayed on the white screen "Please turn camera of then on again". This doesn't work, i can still take photos but when i try to zoom the same thing happens every time. I was taking some shots and video of some electric arc we


I had the same problem. Tried on and off and press every button and it still tells me to "Please turn camera of then on again". I took my SD card out, turn it on in display mode, select menu, go to internal memory, erase all files in the intern ... Panasonic Lumix DMC-TZ15 Digital Camera

My camera polaroid i533, when a turn on the flash the led is blink red and green, the camera doesnt work. Help me please


... Polaroid I533P Digital Camera

Lens cap off but pictures all black. Tested another SD card same thing happens. Black on review on camera and black when put SD card in computer. Camera a few years old and never had a problem before. Flash works and all other displays look fine??


Hello,\015\012\015\012Is this a Canon ? If it is, you need to call Canon. You might have a CCD sensor failure. \015\012\015\012Take a look at ... Pentax *ist DL Digital Camera

When I turned on my camera the green light blinks on and right off. I changed batteries and the camera worked for about 1 week and now it's doing the same thing


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Digital Cameras

I've had my Panasonic Lumix DMC LX3 for about just 3 months. It has worked like a charm until today, when suddenly several things have gone whack, as if the calibration died. I just uploaded pix to my computer, but I can't erase them from the camera. The buttons do not respond. When I turn the camera on, it goes immediately to the "Burst Shooting" window, and doesn't respond to the select buttons. It just blinks and beeps on the "Normal" selection. When I try snapping a picture, nothing happens.


My camera problems have been resolved, although I can't attest to how or why. After about six hours, as I prepared to pack off the little guy to the manufacturer, everything had gone back to normal. I'm left only to speculate that maybe the camera ad ... Panasonic Lumix DMC-LX3 Digital Camera

My Canon Powereshot 200SX IS does not start properly. Display comes on but the lens stays closed inside and a led blinks. After a while display turns black, a beep comes on and the white text says: there is an error, try to start again. Starting it again brings exactly the same situation. Loosing the battery does not help either. Camera seems not to react to any control buttons. There has not been any any obvious reason for this, no falling onto the ground or any other impact.


See http://www.fixya.com/support/r13011856-lens_error ... Canon Digital Cameras

Camera works but no LED display and power switch not working. battery has been tested and is ok.


First you, should give the model of the camera, which will help for better understanding the problem. ... Sony Cyber-shot DSC-W55 Digital Camera

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera

My disney pix micro digital camera wont take pictures. we put in the right batteries the correct way but the LED flashes and beeps three times every time we try to take a picture and the counter display blinks 00.


How old is it? The average life span for a low-end ($100. to $200. usd) camera is about 1500 to 3000. photos. That camera averages $19 to $30. usd. You would be lucky to get 1500. pictures out of it.\015\012Sorry man.\015\012\015\012Rob ... Disney Pix Micro Digital Camera

It is showing "err 70 shooting is not possible due to an error turn the camera off on again" when i'm trying to shoot any picture..apart this everything is working very fine like displays and other things are totally before the attempt of shoot...


... Digital Cameras

Hello My casio QV-R51 won't start. When putting on batteries, the camera green led blinks. The screen does not display anything. Thanks for your assistance


... Casio QV-R51 Digital Camera

My panasonic lumix dmc-fs3 will not connect to my pc so I can upload pictures. It is not my usb port because I can plug other things into it and works fine. This happens with any usb cord I try to use. Also when I try to connect it I get a message that says picture is displayed for 4:3 tv for a 16:9 setup and even though i've reset all the settings on my camera it still comes up


Start using a card reader instead of your camera. ... Panasonic Lumix DMC-LZ2 Digital Camera

Led display broken,does not work - Canon PowerShot SD600 Digital Camera


Your best bet for this lcd problem on the SD600 would be: www.camerasandparts.com They just specialize in service for the powershots and they have all of the options availa ... Canon PowerShot SD600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5912 seconds