Having problems with your Canon PowerShot A510 Digital Camera ?

"E18" message when I turn on the camera

\015 Lost the owner's maual\015

Answers :

The answer is here:
http://www.e18error.com/
Repair Help & Product Troubleshooting for Canon PowerShot A510 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

E18? Hi, folks!  I have an old Canon PowerShop s100 that displays the message "E18" when I try to turn it on.  Thoughts?  I'm going abroad tomorrow and really need a working camera!! Less pressingly, I no longer have the software that came with the camera, and I have a new Dell with Vista. I've been trying to download photos off my camera, but when I attach the camera to the computer, I'm asked to install driver software that I don't have.  Can you suggest a site to download Vista-compatible dri


E18 means that the lense is not coming out all the way it is a internal error it is going to have to be taken apart and the internal workings cleaned. for drivers sorry have know idea. ... Canon PowerShot S100 Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

When i turn on the camera it beeps and a message comes up in the right hand corner (E18) the the camera turns off!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot A520 Digital Camera

I have a Canon PowerShot A400 digital camera. when I turn the camera on, it acts like it is going to turn on, then it starts beeping and the screen goes black. It has the message E18 in the lower left corner of the screen. I changed the batteries, but it is still doing it.


Please see this post:\015\012\015\012http://www.fixya.com/support/t102982-e_18_problem\015\012\015\012Good Luck!\015\012\015\012Brian ... Canon Digital Cameras

The camera was dropped by my son, which happened before, when turned on the canon logo shows then the screen is black. An error message in the bottome left says E1b or E18. Help!! thanks


Here is some information on the E18 error: http://www.e18error.comA repair guide (suggestions) http://www.e18error.com/repair.htmlForum for users with the same problem http://www.e18error.com/posts/index.php ... Canon Digital Cameras

Hi there Canon Ixus 750 Turn camera on ready to shoot in camera mode lens extends screen goes blank and shows E18 message All other functions are working Kind regards Paul


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Canon PowerShot SD550 / IXUS 750 Digital Camera

E18 error message when camera turns on, and will turn off after a second. Lens will not retract, and shutter is loose inside.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot S500 IXUS 500 Digital Camera

Error E18 When I first turn on my Canon Digital A520 I get an E18 message and my Camera goes off.


It is a flaw well know by users of Canon Powershot and Ixus cameras and\015\012is currently not acknowledged by Canon as a flaw in camera design. \015\012\011\011HOW IT ALL WORKS: Canon E18 error\015\012happens wh ... Canon PowerShot A520 Digital Camera

Camera has a E18 message when I turn it on, then it turns off by itself


Lens errors (E18 errors on Canons) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preve ... Canon PowerShot S2 IS Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

E18 error message when turning on camera. then it automatically shuts down


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot A80 Digital Camera

When i try to turn the camera on i get a E18 message,and it won't come on


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot A85 Digital Camera

Lense will not retract. I get an E18 error message. I can turn camera on and off, delete pictures but cannot take pictures. I opened the compartment with the battery, removed it and reinserted it. I also wiped the contact with a clean cloth as advised in the manual.


Hi,Here is a tip that I wrote about How to get a Digital Camera Lens to work againSteps to Repair a Digital Camera ... Canon PowerShot SD500 / IXUS 700 Digital Camera

I get E18 message when I turn on the camera-with clicking noise-and the lense doesn't open-can't take pictures or download


... Canon PowerShot A95 Digital Camera

"E18" message when I turn on the camera


The answer is here:http://www.e18error.com/ ... Canon PowerShot A510 Digital Camera

Error Message I recharged my battery last night after taking pictures and modifying some photos. This morning I turned on my camera because I was going to tr and download pics onto computer. I plugged in cord to the camera and to the printer port (that may have been my mistake) Nothing happened, since the camera wasn't on. I turned on the camera and I got this error message (on a red screen): Camera hs experienced an error. 00000013-2F6B-FFF-298 Please reset your camera I tried the lightly smack


Tried to take pics but got msg that battery is not charge enough to take pics.  I charged the battery overnight and nothing.  I turn on the camera and the little blue light illuminates for 1 sec and goes out, still no charge.  Do I nee ... HP Photosmart R727 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was


... Panasonic Lumix DMC-LZ2 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4789 seconds