Having problems with your Canon PowerShot A520 Digital Camera ?

Camera not working - E18 displayed in viewing mode

\015 When turned on in viewing mode, camera bleeps then displays 'E18' in bottom left corner. In camera mode, bleeps and grey horizontal lines on screen; lens doesn't open. Camera working fine last time it was used and batteries are newly charged.\015

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot A520 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera not working - E18 displayed in viewing mode

... Canon PowerShot A520 Digital Camera

My camera when turned on beeps and displays a black screen and reads E18 at the bottom left corner when in camera or video mode. The shutter does not open either. The camera however seems to work fine when viewing pictures.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon Powershot SD450 / IXUS 55 Digital Camera

A85 Dead During a normal session, switching from picture-taking mode to view mode, the lens would not retract and the picture in the view froze with the current image. I could not turn off the camera. After a while, the batteries got very hot, so I removed them. I took out the CF card. Later, I replaced the batteries and the put the card back in. The camera worked very briefly, but the LCD view would not work, displaying flashing lines on a black background. New batteries didn't help. The camera

I read something about the fuse going out...http://www.dcresource.com/forums/archive/index.php/t-18151.html ... Canon PowerShot A85 Digital Camera

My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed

Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras

My SD800IS was working fine while in the very hot/humid environment of Yap. I took it out of my air conditioned room and went to take a picture almost immediately. The view finder, the LCD image and the lens were all fogged. The camera worked but took foggy images. Eventually the fog cleared and my photos were fine but most of the controls no longer work. I can change the selector knob that determines if the camera is on auto, manual, video or display modes but it won't zoom and the program

The foggy images and lens was due to condensation caused by the camera's surfaces being cold in a humid/moist environment. Usually this happens and goes away without issue. If you believe issues are continuing, consider placing the camera completely ... Canon Digital Cameras

When I turn on my camera to take a picture the display screen is completely black. If I try and take a picture nothing comes out. The whole picture is completely black. The camera is still functioning as if it is taking the picture. The flash continues to work, but unfortunately no picture comes out. But when I switch to the display mode to view my pictures, I can see the old pictures from my memory card. But I just can not take any new pictures. What should I do? What do you think the problem i

Hi there,You can refer to this page as this is helpful for most of the issues related to Digital Camera.Fix th ... Canon Digital Cameras

Fuji f700 just recently my camera lcd displays a black screen when in shooting mode making it unable to take pictures .the screen works fine when in viewing mode..any ideas regards ruth

I recently had trouble with the LCD Display coming up with a black screen. So I mailed it to Fuji with a letter explaining the problem. About 3 weeks later I got it back in the mail and it seem to be working fine until a month later. I turned it o ... Fuji FinePix F700 Digital Camera

DSC-M1 The LCD of my camera doesn't show any VIDEO when i switched on to either CAMERA or VIDEO mode except for the icons and text display. However, the LCD works fine when i'm VIEWING the pictures from the card.

Where exactly is the CCD board ... I've ordered a new one and don't know where to put it! ... Sony Cyber-Shot DSC-M1 Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?

Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)

It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

When I turn the camera on the lcd and viewfinder only display setting icons the rest is black. The lense does extend. Display and viewfinder work in view mode. Whats the problem? Is it worth repairing? Is there anything I can do? recommended repair center?

Hi there, Here is something to try:\015\012\015\0121. Set the camera toTV mode\015\0122. Set the shutter to 15 sec\015\0123. Click to take a photo/image/video like you normally do.\015\0124. During the 15 seconds _a abo ... Canon PowerShot S2 IS Digital Camera

My Canon Powershot SC1100 IS, Digital ELPH, has always been great. a problem occurred. the camera said, card locked. I took out the SD card and pushed the switch up. then it was ok, except now I cannot use the view finder?? the display one. it works in video mode but not for taking photos. is there a button to press to make it work again?

... Canon PowerShot SD1100 IS Digital Camera

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.

... Canon PowerShot A400 Digital Camera

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera

Images taken with a Samsung Digimax A 503 that were written to a SD card will display in tumbnail mode but can not be opened on the compter to be viewed or printed. Some images render partially, some not at all and a couple work correctly. Some images return an error "loading or one or more plug in failed. The plug in files might be corupt or not valid". Can you tell if it is a problem with the camera, SD card or a driver? Is there any way to recover the photos?

Hi, kindly get it downloaded here :\012www.nodevice.com/driver/.../Samsung/Digital_Cameras.html\012\012 ... Samsung Digimax A503 Digital Camera

Canon powershot A520 doesn't work in camera mode. I can look at and edit pictures in viewing mode, but switching to "camera" won't let me take pictures... in this mode it also lets me view pictures already on card, so something isn't making the switch over.

Hi!\015\012Do other buttons work? If so, the switch could be broken because it sounds it doesn't switch to the CAMERA mode, just stays at the VIEW mode.\015\012If you're not experienced in repairs, you should give it to a local repair sho ... Canon PowerShot A520 Digital Camera

The camera, in camera mode, periodically displays a muddled picture on the screen. If I take a picture the picture is muddled. I can view previous pictures taken when changed over to view mode.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.

... Panasonic Lumix DMC-FZ28 Digital Camera

My Olympus Digital Camera D510's Lens jammed and not going in and I am not able to do photography. My Camera working fine in View mode and able to view photos from card. But in picture mode screen is showing empty, I think problem occurred because a gentle pressure come on Lens. I showed my D510 to Olympus authorized shop and they are saying it is related to shuttle lock (I don't know what it is). But as I am not having international warranty they refused to repair and asked to charge around

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Olympus Camedia D-510 Zoom Digital Camera

I have Sony DSC-T90 camera. I think it's memory card is virus infected. When i attach my camera to computer to download pictures then only shortcuts of the folders are displayed. I can view the pictures in Camera but only shortcuts of folders are displayed. When I click on the shortcut a message "The item 'zivutx.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut?" is displayed.... Please help me to

Have you tried removing the memory card from the camera and inserting it directly into the computer's card reader or any other card reader? ... Digital Cameras

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli

Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

I have a Canon camera, which worked fine. I had to recharge teh batteries often, that was all. Last night, i took it out. In view mode, the camera does not shut off. The moment i switch to camera mode, the lens opens out and then the camera shuts off. What do i do pls? Any help appreciated

I'm assuming you're talking about a point-and-shoot model, and not the\015\0121000D as the category suggests. Camera mode has significantly higher\015\012power requirements than viewing mode. It is possible that your\015\012rechargeable battery has d ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.

Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?

Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

E18? Hi, folks!  I have an old Canon PowerShop s100 that displays the message "E18" when I try to turn it on.  Thoughts?  I'm going abroad tomorrow and really need a working camera!! Less pressingly, I no longer have the software that came with the camera, and I have a new Dell with Vista. I've been trying to download photos off my camera, but when I attach the camera to the computer, I'm asked to install driver software that I don't have.  Can you suggest a site to download Vista-compatible dri

E18 means that the lense is not coming out all the way it is a internal error it is going to have to be taken apart and the internal workings cleaned. for drivers sorry have know idea. ... Canon PowerShot S100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4278 seconds