Having problems with your Canon PowerShot A520 Digital Camera ?

My cannon a520 had a code on the screen when I turn it on E18 and then shuts off.


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.

Use\015\012\015\012\015\012\015\012\015\012\015\012\015\012 these at own risk as it may further damage the camera.

Firstly ,\015\012 try connecting your ac adapter or usb cable.

Try holding the \015\012shutter button while switching on the camera.

Look at the lens , \015\012and if some of the lens 'circles' is misaligned or not concentric then \015\012try wiggling it (while holding camera lens down).

Try gently \015\012pushing or pulling the lens when it extends but this is risky as it may \015\012cause the lens barrel to slip out of its guidance system.

Another\015\012 way to do this is to place the camera lens down on a hard surface and \015\012then power it up. Be sure to use a soft cloth or something similar as to\015\012 not scratch your lens or casing. Let the lens push the camera up and \015\012down a few times and sometimes the little resistance provided by the \015\012camera is enough to get things going again.

Try hitting your \015\012camera near the lens on the body with the soft tissue on the palm of \015\012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \015\012replace the camera.

If it is still under warranty I would suggest\015\012 you take it in before trying any of these steps and remove any \015\012off-brand batteries or accessories as some stores are really fussy about\015\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\015\012 \015\012the advise is useful. please do not hesitate to let me know if you need \015\012any further assistance. Also, please be so kind to let me know if you \015\012found this helpful.

Regards
Andrea.
Repair Help & Product Troubleshooting for Canon PowerShot A520 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My cannon a520 had a code on the screen when I turn it on E18 and then shuts off.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot A520 Digital Camera

E18 error code comes up on screen everytime I try to turn it on in camera mode. Then it shuts off automatically. I can view old pictures but can't take new,.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot A75 Digital Camera

A95 Trouble My camera will not turn on. If i press the on/off button the little green light goes on, the lens starts to extend out, then a beeping noise sounds and it shuts off. On the screen, its black and a tiny code is displayed on the bottom that says "E18"


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot A95 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu


OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Turns on, Cannon startup screen shows, then it bleeps and E18 comes up in bottom left hand side of screen. Then it turns off


Hi,Please open the link below and follow the instructions to resolve the issue.http://blog.wolffmyren.com/2008/10 ... Canon PowerShot A85 Digital Camera

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.


... Canon PowerShot A400 Digital Camera

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.


Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera

I have a cannon pc1038. no. 6521310872. It turns on and it starts to beep. then in the screen it say's : E18 then it turn off. Also the last time I use it the front lens stayed opened. Is there any way I can fix my camera. Thank you, Mad


... Canon Digital Cameras

E18 turn on camera whirring noise shutter does not open after a bit the e18 appears in the screen. then shuts off.


The E18 error is fairly common. Here's some things that you can do to try to correct it. Have already fixed several cameras with this problem by using these methods:\015\012\015\012 ... Canon PowerShot A75 Digital Camera

Canon power shut A520 - When I turn on my camara it stays on for only 30 seconds, the blue screen stays on and the lens part wont open ,its stuck,, then the camara just turns back off with ti ti ti noise , when i shake the camera i hear a tiny something loose inside ??? thank you very much for your help


Did you get it serviced lately ... Canon PowerShot A520 Digital Camera

Digital camera I have a cannnon power shota510 digital camera when i turn the power on the screen shows the cannon screen then goes black then it makes a beeping noise then proceeds to shut off i've changed da battery but still cont. to do it


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012\015\012 ... Digital Cameras

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Camera wont turn on zoom lens is stuck out camera power light comes on flashes for a few second the screen shows a E18 then it shuts itself down


The lens motor or drive has failed. Thats why you are getting the error and the lens won't retact.This is covered under warrenty if you have any. If not it can cost more than a new camera to get fixed. If you conact canon support or conac ... Canon PowerShot A410 Digital Camera

I have pushed the power button on my camera , it powers on then just a code of E18 comes on the screen and then it shuts off.


Instructions\012\012If your camera is still under warranty, the best thing you can do\012is to take it to the nearest official Canon repair shop and Canon should\012fix it for free.\012\012If your camera is ou ... Canon PowerShot A520 Digital Camera

Screen says E18 when you try to turn on then shuts off, but lens does not go in all the way


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A470 Digital Camera

Canon powershot A60. When the camera is turned on there is no image won't take shots, has a number on screen E18 and shuts down after a few seconds. Mike


E18 is an error code from self diagnostic system of the camera.if there is a malfunction in the lense assembly or the focus assembly then this error code appears. You have t show it at a repair shop. ... Digital Cameras

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.


The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

Cannon powershot s2is camera, lense stuck open. I get beeps when I turn it on. Shows error code 18. Shuts off.


Lens errors (E18 errors on Canons) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preve ... Canon Digital Cameras

Unusable When I turn the camera on, it makes warning type noises that I've never heard it do before, and then displays the code E18 on a black screen in the lower left hand corner.


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot S410 / IXUS 430 Digital Camera

Lens Error Whenever I try to turn on my Cannon Powershot SD1000 digital camera the screen says ''lens error, restart camera'' but then it shuts off. What should i do?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1000 Digital Camera

When I turn on my PowerShot A70, it comes on and immediately shuts itself off and the Error E18 appears on the screen.


Crunchy lens moving sounds are mostly dirt inside. I stuck my M1033 inside the hose of a wet vac and operated the lens several times. Problem solved. Now I keep it in a cloth bag. ... Canon PowerShot A70 Digital Camera

Canon 20d ,error code 99,shutter keeps firing rapidly, shut it off, removed batteries, but when you reinsert batteries it firea and when you turn it back on it continues to fire also I don't have a menu screen no more


... Digital Cameras

The camera keeps coming up with error code E18 and the zoom lens is not going in and out when you turn it on and off It will not go in far enough for the lens cover to shut


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot SD550 / IXUS 750 Digital Camera

Camera shuts off after E18 error code


You have most likely dropped the camera or banged it against something while the lens was out. This situation causes the brass pinion gear to shear teeth off the plastic ring gear on the Inner Lens Housing. It may also cause the guide pins to jump ... Canon PowerShot SD300 / IXUS 40 Digital Camera

Error-C1 I was on holiday in dusty hot conditions when my second hand camara became unusable. I turned the camara on to take a photo and the zoom lens and shutter became stuck. The screen went blue and 'error-C1' appeared on the screen. Every time I turned it on thereafter the same blue screen came up and it makes a strange mechanical noise when I turn it on. It also turns itself off after a few seconds but the zoom still doesn't shut. The battery symbol still appeared but it appeared to be out


Dirt /dust in the lens and lens gear box ( this drives zooming only ) preventing optimum functioning. Lens cannot properly come on line ( shutter and diaphragh mechanism then do not come on line ) and the camera switches off. Solution : is ether repl ... Kyocera Finecam S4 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2874 seconds