Having problems with your Canon PowerShot A520 Digital Camera ?

My canon a520 is not working properly camera is in held position just canon screen appear after two or three seconds camera auto turn off ........is this ans software problem or something els...



Answers :

You can proberley get new softwear for it as well you may need to take it in to be serviced
Repair Help & Product Troubleshooting for Canon PowerShot A520 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon a520 is not working properly camera is in held position just canon screen appear after two or three seconds camera auto turn off ........is this ans software problem or something els...


You can proberley get new softwear for it as well you may need to take it in to be serviced ... Canon PowerShot A520 Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi


Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

I too have the same problem with my DMC-FS15:- When I turn the camera on in either record or review mode, I get a system error: zoom message after a few seconds, and the camera is inoperable. Then when I turn the camera off, the lens does not retract. Is there updated software that can be downloaded and installed via the supplied USB cable, or any other fix? Regards Martin J


Well perhaps it is just the battery I wonder if this problem isn't simple a bad battery try a replacement, as sometimes they just go bad, and this is indeed a symptom of a battery not working properly. If you have an original power supply, then try i ... Panasonic Lumix DMC-FZ28 Digital Camera

I have a canon rebel xsi that is not taking pictures on auto focus. It will take pictures on manual focus, but they're blurry. I changed my lens to a bigger one to see if it was the lens or camera, and it's the camera. I had the same problem with the other lens. I've tried cleaning it & turning the lens focus ring but is still doing it. Anyone know how to fix this problem?


Try cleaning the lens contacts on the camera body and on the lens.This maybe the problem, it is not making contact with the lens zoom motor. ... Digital Cameras

When I turn on the camera, for few seconds it shows the image trough the lense, but inmediately it seems to turn off, and this legend apears on the screen: D5 f 08 5 f 0a 5e02 5 f 085 e02 the battery is ok, the memory stick appears to be ok, so I assume is a software problem. how can i solve this? I do not have the disk of the camera since my son lost it.


The error is a lens motor error. The lens is not able to properly move and the camera then gives the error message. Sometimes dirt can be stuck in the lens or it could just be a mechanical problem that needs repairs. If you point the camera lens towa ... Olympus Stylus 710 Digital Camera

Hello typrice, at the second paraghrap you said: "Or the battery ran down with the lens extended." as a possible cause. I'm quite sure this is what happend with my camera (is a FE-340 model) so I tryed all the fixes 1 to 4, because I don't think it is a blocking problem of the lens. The simtom is just as discribed (lens go out and in 3 times, then turn off). I still can't fix the problem, there is any way to restart the software?? I find it should be simple to fix but still have no success... PL


You say you've tried fixes 1-4. Your symptom sounds like the lens is trying 3 times to open fully and then gives up. Why haven't you tried fix #5? ... Olympus FE-340 Digital Camera

Battery Problem I bought a Nikon Coolpix L12 Digital Camera this past summer and have had no problem until last night. My camera turned off and said "battery exhausted." After changing the batteries twice with new batteries, the lens would open for a second then close and the camera turned off once again saying "battery exhausted." I don't know what happened. I had same problem. No matter how many times I have changed batteries, It works for a second then closes with signal saying "warning batt


These cameras have a internal battery that holds data for the camera to keep its settings. These batteries can be replaced but the camera has to be disassimboled to change it they should be able to be changed at a local camera shop pretty cheap. ... Nikon COOLPIX L12 Digital Camera

Power/lens Problems I'm having some power/lens problems with my camera. When I turn on the power in either the picture or video mode, the green light will turn on for a split second then turn off. The lens does not come out at all. However, when I try to turn it on with the picture viewer or in the menu it works just fine. When I start with the picture viewer and then switch to the camera it turns off. Thus it seems that whenever I want to take a picture or a movie the camera doesn't work.


It seems that the lense movement is jammed. Have you dropped the camera? just have a close look from the front side of the camera, does the lense assembly seems to be pressed or moved aside by some extra preassure? if no physical disalingment is vi ... Sony Cyber-Shot DSC-P72 Digital Camera

CF error I own a Canon 400D. It worked perfectly until today. I inserted the cf card, and turned on the camera. It took a couple of seconds to light up, and I got a message that the cf card was faulty and needs to be replaced. I used another one...it said the same thing. I tried reformatting. It gave me an err99 and then said that "shooting is not possible" I formatted the card on the computer...no luck. The pins are in place, I checked. What could be the problem and how could I go about solving


My canon xti had the same reading cf card error 99.\015\012Since my camera is out of warranty. I had to find a way to fix it. After reading all possible solutions in this site, I looked at the pins (that used to connect to the CF card) and foun ... Canon EOS 400D / Rebel XTi Digital Camera

Battery Problem I bought a Nikon Coolpix L12 Digital Camera this past summer and have had no problem until last night. My camera turned off and said "battery exhausted." After changing the batteries twice with new batteries, the lens would open for a second then close and the camera turned off once again saying "battery exhausted." I don't know what happened. Oh My Gosh. I have the same exact problem. My son just graduated high school and I missed half the pictures because of this. Way to captu


ITS NOT THE BATTERIES -- check out the internet (google "nikon coolpix battery exhausted" and you'll see hundreds of people are experiencing this glitch. best fix i've found so far: remove batteries and memory card, then replace batteries and t ... Nikon Coolpix L11 Digital Camera

Does Canon have a problem with their software? When I try to download photos the camera is recognized by the software but then the window does not provide software available to download, even though I have downloaded tons of photos prior to this problem. The computer was sent to the shop and the Canon software was uninstalled and then reinstalled. The tech cleaned up some other issues, but is at a loss to figure out why the software will not download photos. We have spent litteraly hours on this


Did you try reading the card with a card reader. The camera's card reader slot is very sensitive to file system changes and this is probably the reason why its not able to download. Inset the card into your laptop's card reader and see if it reads th ... Canon PowerShot SD790 IS Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Focus There is one problem that I have with this camera - Auto Focus in low lighting and it has really limited manual focus. Outdoors this camera is outstanding, I haven't found any pitfalls outdoors yet. 10x optical zoom plus 2.5" LCD WOW. Although the LCD is littly choppy, but I don't care about that, pictures turn out really gooood. Anyways back to Auto Focus problem. Do any of you have the same problem? Or this is my ability problem? That limited manual focus really bugs me! I'd like to hear


I have similar problem. So I use manual focus (1m,3m,inf) & move camera for finest pix. On AF, the adjustment seem to go past sharpest image point but settles on a fuzzier setting. Is there any place that can make a repair? ... Toshiba PDR-M700 Digital Camera

My Canon Powershot G3 will not respond. When I turn it on a get a rapidly flashing green light on the back, and when I try to connect I get the message on the computer that there is no supporting software. To try to reinstall the software on the camera I uninstalled the Canon software, reinstalled it, and then connected the camera, hoping that the software would reinstall whatever was corrupted or missing. Do you know what is going on? Paul Luyben


... Canon Digital Cameras

Problem*cybershot DSC-S40 Hi 3 day ago i turn On camera.but after Shot,camera Lens problem is started(not Close or ready to use) ...Lens Vibrating!!!Lens sound is geeeeeezzzzzzhhh!!!!(10-15 sec)..... Turn ON and OFF take a Few Second ( 10-15 Sec ) .....finally this text show in the screen : "please turn OFF and ON again" i don't remember camera Dropped !!!! Or other thing ... battery is FULL charged !!! JUST i can review recent picture please Help meeee :(


You have a jammed lens error the lens has to be repaired or replaced. You dont have to drop the camera for this to occur it can happen when ever the camera is in your pocket or purse. it accidently gets turned on and when the lens is coming out it is ... Sony Cyber-Shot DSC-S40 Digital Camera

Hi, I am having S2 IS camera.... Haven't used it for the past 6 months....now facing one problem. I brought new rechargable batteries, charged them properly for about 9 hours and then tried to turn the camera on. Although the Camera turned on, only a blank screen came and nothing was visible. After just 10 seconds, it started showing the message "Change the batteries". Please help me in understanding the problem


First, are the batteries inserted correctly? Try cleaning the battery contacts in the camera with a cotton swab lightly dampened with rubbing alcohol. ... Canon PowerShot S2 IS Digital Camera

Battery Problem I bought a Nikon Coolpix L12 Digital Camera this past summer and have had no problem until last night. My camera turned off and said "battery exhausted." After changing the batteries twice with new batteries, the lens would open for a second then close and the camera turned off once again saying "battery exhausted." I don't know what happened.


I just had this problem today myself, and looked everywhere online for a solution. I changed the batteries (to Panasonic), and it didn't help. But i tried different batteries (Energizers) and the camera started working again. ... Nikon Coolpix 3200 Digital Camera

Switch glitch When i turn on my camera it goes off again within a few seconds (or maybe less). I have to turn it all the way off (slowly) and on again. Sometimes it stays on (at least long enough for a photo) and other times not. Has been getting worse so now the camera is pretty useless. I am presuming that the switch has had it (any other suggestions?) Interestingly while it was under warranty i had switch problems and it was replaced so this is the second switch on the camera. Is the switch a


I have the same camera and it does something very similar. I'm guessing it is not the switch but rather the internal battery for memory backup needs replaced. It is not a do it yourself repair nor is it cheap. One option you can try is to use the ... Fuji FinePix S5000 Digital Camera

Transfer problem My computer says ''camera not found'' when I attempt to transfer pics from my Canon SD960. I have loaded the Canon software and I am running Windows XP. I don't have this problem with an older computer in the house which proves that the problem is with my computer and not the camera.


Use a card reader to download your pics. ... Canon PowerShot SD960 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4746 seconds