Having problems with your Canon PowerShot A540 Digital Camera ?

We have an new computer and now I can't download my pictures from my Canon Powershot A540. I installed the software. When I click on 'Acquire & Camera Settings' or 'Connect to Camera' the selection closes. HELP!


Answers :

Use a separate card reader instead of your camera...works every time.
Repair Help & Product Troubleshooting for Canon PowerShot A540 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have an new computer and now I can't download my pictures from my Canon Powershot A540. I installed the software. When I click on 'Acquire & Camera Settings' or 'Connect to Camera' the selection closes. HELP!


Use a separate card reader instead of your camera...works every time. ... Canon PowerShot A540 Digital Camera

EOS Utility I purchased a Rebel Xsi, and installed the software. Upon connecting my camera to my computer, and launching the EOS Utility, the options to download the images, select images, or camera settings are shaded out. In order to transfer pictures, I have to go into "My Computer", open up the camera and copy and paste it. I have updated all of the software from Canon's website with the June 2009 updates, and the problem persists. Thanks for the help.


I got the same problem updating the EOS Utility. The version on the original SXi CD is 2.4.0.1. The upgrade is version 2.6.1. I suggest you to uninstall all the updated software. Or at least the EOS Utility. Go to the folder <C:\\Documents and Se ... Canon EOS Rebel XSi Digital Camera

Help Hi. I recently added my brother's new Canon PowerShot SD1000 Digital Camera to my laptop. It already had my downloaded ZoomBrowser EX on it. Now, it won't let me load my pictures from my camera for some reason. I click on "Acquire and Camera Settings" and click on "Connect to Camera" the button shuts out. Please feel free to ask me any questions. Thank you very much. my doesn't say i have a virus when i plug in my camera and then turn it on in playback mode, as i've always done, the pictur


It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a muc ... Canon PowerShot SD1000 Digital Camera

I cannot seem to download the pictures I have taken on my Canon PowerShot A410 to my computer. I am on the playback setting and I connect my camera to my computer, but I just get a message from Camera Window that says "Cannot detect Camera. Check connection to camera, then retry." I have even downloaded ZoomBrowser EX and clicked on the "acquire images" button but nothing happens. Please help!


Use a card reader to download your pictures to a folder you create on your desktop. ... Canon PowerShot A410 Digital Camera

Help Hi. I recently added my brother's new Canon PowerShot SD1000 Digital Camera to my laptop. It already had my downloaded ZoomBrowser EX on it. Now, it won't let me load my pictures from my camera for some reason. I click on "Acquire and Camera Settings" and click on "Connect to Camera" the button shuts out. Please feel free to ask me any questions. Thank you very much.


Hi attache the camera to computer scan anti virus and try to download pictures ... Canon PowerShot SD600 Digital Camera

Help please Hi. I recently added my brother's new Canon PowerShot SD1000 Digital Camera to my laptop. It already had my downloaded ZoomBrowser EX on it. Now, it won't let me load my pictures from my camera for some reason. I click on "Acquire and Camera Settings" and click on "Connect to Camera" the button shuts out. Please feel free to ask me any questions. Thank you very much.


Http://www.usa.canon.com/consumer/controller?act=ModelInfoA ... Canon PowerShot SD600 Digital Camera

PC Connection My camera came with ACDSee for Pentax for viewing images etc. When I initially installed it worked great, as soon as the camera was linked to my laptop (Toshiba Satellite Pro running XP), ACDSee device detector would launch automatically, click the steps and photos would download- easy. Last month when my camera was connected, the device detector didn't launch and I had to through my computer, select the removable disk and acquire images that way. Tonight I had the same trouble but


I think it is bad connection from the usb cable to the camera try to move the connector in the camera( bending) ... Pentax Optio M20 Digital Camera

WHEN I CONNECT MY CAMERA VIA THE USB CABLE AND SELECT DOWNLOAD PICTURES TO PC NOTHING HAPPENS.WHEN I GO INTO MY PROGRAM FILES IT CANNOT BE FOUND, I HAVE TRIED TO REINSTALL USING THE SOFTWARE CD SUPPLIED WITH MY CAMERA BUT CANT GET IT TO RUN, THE CD IS VERSION KA2.1 h owners manual pdf format, Adobe Reader Installer' CAN YOU PLEASE HELP SOLVE THIS PROBLEM ------THANK YOU


This type of problem is probably software related, but it could be some sort of incompatibility issue.\015\012What you can try to do to get the pictures downloaded, is to get a card reader, hook it up to your usb port, and access them through t ... FUJIFILM FinePix S1600 Digital Camera

Downloading After I installed the downloading software and connected the camera to the computer properly, I get the message box to open with the canon camera downloading program, I select it and click okay and nothing happens.  Any ideas what I'm doing wrong?  Zoombrowser and eos utility don't do anything either.


Hi, In dowloading picture it must be in play mode to detect camera by your computer try it now , insert usb to camera and computer you can hear alert beep , the downloading icon will appear either from operating system or cd supplied by camer ... Canon PowerShot A560 Digital Camera

My Youcam says Cannot connect to this Video device(USB Camera). Please select another capture device via Setting or close any application that may be using this video device and restart YouCam please help me out .. i dont know what to do


I've got the same problem...i'm using build in usb camera on HP compaq labtop and the operating system is windows vista..please guys any help?? ... Digital Cameras

Panasonic DMC - F3. Attempting to load photos from camera to PC. Software provided has been installed. Camera has been connected to the PC via provided USB cable. PC does not seem to recognise camera. Camera is saying " connecting to PC " NO copy to PC screen appears. Copy to PC function within PhotoFunStudio5.0 does not work.No source drive can be selected. Next button is greyed out and selection box is empty. PC seems to not recognise camera


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Panasonic Lumix DMC F3 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?


Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

Transtwain exe I bought the Star Wars Clone Wars Digital Camera Kit. It brings the Image Master software and driver installation CD and a USB cable. Everything installed right, right until the moment that the Image Master software turned on and it did not recognize the camera connected. The TransTWAIN.exe shows up and says that it has stopped working. I uninstalled the program many times and still the same result. Is there any help I can get with this matter? My son has taken many pictures on hi


... Digital Cameras

Bought canon rebel xsi camera and cannot download to computer. Small EOS Utility window opens to select software to download pics to but is blank, nothing for me to select. Top of window says camera connected to computer. Have uninstalled Canon software and reinstalled but did not help.


You could possibly try putting your memory card in a card reader and manually move them in Windows Explorer. They are located in DCIM folder. ... Canon Digital Rebel XSi Digital Camera

When i try to load photos from my Fuji Camera using the installed software provided (finepixviewer), I select ''load photos'' then, ''from camera'' only to be taken back to the previous menu where i have to select ''load photos'' again. The camera is switched on, plugged in properly AND recognised yet i simply cannot make any progress beyond ''load photos from camera'' can anybody help me?


Just dont use their provided drivers or software. If youre on the Internet and using windows 7 you will always be updated enough for your camera of any brand can download and even altar content to a file on your computer. ... Digital Cameras

Problem lies between my ears :). I installed PBM software on notebook but last part od installation about connecting camera to notebook goes into a loop insisting I plug the camera in. When done and click on continue it re-asks to have the camera plugged in. Control panel of notebook sees teh memory stick but you cannot gain access to it. Q: How do I download teh ;picture sto be viewed and copied?


Hi\012you might get a external memory card reader and plug memory stick to reader. then you can see a new drive in my computer. rest of work you can handle.\012Thanks and best regard! ... Sony Cyber-Shot DSC-W530 Digital Camera

Olympus model FE - 170. I have just installed Microsoft Vista and keep getting a message that the camera is not being recognised even though it is properly connected through a USB port. I have installed the Olympus setup disc (version 1.0) but this has not solved the problem. I had no problems when using the same camera and software through Windows XP. Can you help?


Try pluggin it in and go to control panel and search and add hard were and see if there is any files missing or invallid \015\012even try uninstall and reinstall ... Olympus Digital Cameras

I cannot get Remote Shooting option when I loaded the software for my Canon 350D (Rebel XT) camera on a computer with Vista. The software loads the Remote Shooting option for computers with Windows XP. Only option I get under Camera Settings is, Acquire and transfer images to memory card. Can anybody help me please.


According to Canon, camera communication is supported by Vista, like you have experienced. See:\015\012 ... Canon Rebel XT / EOS 350D Digital Camera

Sir I installed the apitek mega manager software from your site. Even after installation it is showing that camera is not connected to computer. I have checked all the connections but still no results pls help me as there r imp photos. I have lost the installatin c d . Anup


... Aiptek Mini PenCam Digital Camera

I have a Samsung PL100 (Dualview). I'm having trouble uploading my photos to my computer using the USB. I have installed the CD that came with the camera (InteliStudio) and when I connect the camera and computer with the USB cord, the red indicator light lights up. However, nothing else happens. The User's Manual says that it should automatically connect and the computer should be able to recognize it. It doesn't. I have tried different settings in the Menu and still nothing happens. Please help


I find that alot of times using the camera to unload your pictures to your computer is more trouble them you need to worry about. i say you just pull out the SD or SDHC card and plug that into you computer. if you dont have an SD or SDHC card reader ... Samsung DualView TL205 / PL100 Digital Camera

I cannot acquire my images from my Canon Powershot SD750 to my Zoombrowser EX. I've never had this problem before. When I click Acquire Images from Camera, it closes the box and does nothing. When the camera is connected through the USB port, it doesn't bring up the information asking if I want to import the images.


... Canon Digital Cameras

Hi, i am unable to transfer any pictures from my newly purchased D90. The transfer software loaded fine onto my lab top and it recognises the D90 camera as external hardware. However when i click start transfer nothing happens nor do i get any error messages. I can view the photos fine when the card is in the camera but for some reason the software cant see them when i connect via USB - can anyone help or ideas please?


I don't even bother with the camera and software. I use a card reader to download to a folder I create on my desktop. Once the pics are there I can view them from there or use a photo editing program such as Photoshop Elements to work with them. Much ... Nikon D90 Digital Camera with 18-105mm lens

Trying to connect PDC 3070 to computer to view pictures. Have installed CD that comes with, but camera screen shows MSDC and will not connect to Windows Explorer to let me continue with booklet instructions. Camera is set on Playback as instructed. Can you help?


Hey kittywhat you have to do is load the software for your\015\012camera and from there, you eill be able to do about anything you want.\015\012but since your saying that it doesnt do anything else in Windows\015\012explorer.i ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6523 seconds