Having problems with your Canon PowerShot A560 Digital Camera ?

Windows cannot start this hardware device because

\015 "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) "I encounter the above statement under the device manager when attempting to download photos from a Canon A560. I use Windows Vista if that helps any.\015

Answers :

Consider NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Windows Photo Gallery or Picasa.
Repair Help & Product Troubleshooting for Canon PowerShot A560 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Windows cannot start this hardware device because


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot A560 Digital Camera

My computer (Vista 32-bit) does not recognize my Canon Eos Xs now. It did last week. I looked it up on Control Panel/System/Devices and I see this message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." Windows checked for a driver upgrade and reported that what is installed is the latest softw


Sounds like you may have some corruption beginning on your hard disk - try running CHKDSK /F from an administratively-enabled command prompt. It will prompt you to reboot, then it will run a consistency check on the disk and its filesystem upon boot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My PC is not recognizing my camera, so i cannot download my pictures. It used to work fine for 2 years. In the Device Manager it gives me the following message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My software is up to date. Help!?!


Windows updates has changed the registry and now your camera is no longer recognized. No problem....just get a card reader and use it instead of your camera for downloads. ... Canon PowerShot A570 IS Digital Camera

Having problems downloading pictures from the camera and when I go into device manager and select - I get below message: I have clicked on the "check for solutions" button but get no response from Microsoft. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.


Please get the driver here :\012www.driverskit.com/Camera/Canon.html\012\012 ... Canon Powershot SX110 IS Digital Camera 9.0MP

I plug my camera into the computer and nothing happens. I checked the device manager and the following message appears: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19).


Try using a separate card reader instead of the camera. Works every time. ... Canon PowerShot SD890 IS Digital Camera

Windows 7 says Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Canon Powershot SD750


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon powershot a630 Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)


... Canon Digital Cameras

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

My Canon Pwershot A590 Is is not recognized by the computer and in the device manager window it says "This device cannot start. (Code 10) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." what can i do?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot A590 IS Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

Digital Trail Camera Model#119223C. Trying to view photos on my PC per instructions on page 12 of Manual. Have H-P Compaq Presario PC with Windows XP Home Edtion. PC recpgnizes that New Hardware Device is found but cannot locate any driver/s for the device. Camera did not come with a CD with software to install. PC does NOT display a new disk symbol under "My Computer". Where can I download necessary software/driver? Thanx!


Hi,\015\012\015\012The drivers required to connect digital cameras through the USB port are included in the Windows XP operating system. So, no drivers are necessary to download or view the images on the PC.\015\012\015\012Als ... Digital Cameras

I want to put pictures on my vista quest 500 keychain viewer but i keep getting this error Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)


... VistaQuest VQ-5115 Digital Camera

YASHICA DIGITAL EZ F 527L NOT RECOGNIZE BY PC Respected sir i have purchased your digital camera EZ F 527L. i have used it and it is very smooth and very handy. but when i connected it to my PC it recognize it as unknown device and cannot install it by PC. my system is windows XP home.so please guide me how i can able to recognize and install camera to my PC ? i have another one problem that when i starts camera and set its anti shake function on anti shake it sets on anti shake. but when i swi


Video recoding not audio this camera ... Digital Cameras

I have a canon powershot SD800 IS. When I connect to my computer (windows vista), the icon is not coming up for my to press to download my pictures. I went to the device manager and saw that there is a yellow exclamation mark beside my camera. I tried updating the driver software and it tells me that my device is already uptodate. However, the computer still cannot read the camera and I cannot download my pictures. Please help.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

I recently attempted to install a Genius FaceCam 1000 web camera on my Dell E520 running Windows Vista SP2 with a Kaspersky based AV program. I cannot get any sound from the device.I have tried the camera in Windows Messenger, Google, Yahoo, and Skype. When I test the sound setting I get no volume bars in the test window. I have replaced the camera thinking it may be a problem with the original unit. I have tried running the device using Line 1 (CamSuite Virtual Audio), I have tried running the


... Digital Cameras

Hook Up. The C643 digital zoom camera was working ok, with my Windows 98 S.E. Then I F-Disk and reformatted my computer. Now when I try to use it. I keep getting this message. (Cannot get the device information) Took it out and put it back in serveal times. Same thing. Sent letter to Kodak. Got back sorry we no longer support Windows 98 and the web page they sent me was no help at all. I'm kind of upset. Been using it for a year on Windows 98 S.E. And now they say tough.


Yeah that's frustrating.. here's something that might help though.Follow this link:http://www.kodak.com/global/en/service/downloads/dln_ekn031209.jhtml?operatingSystem=windows_98_se&downloadLanguage=enThere yo ... Kodak EasyShare C643 Digital Camera

UI have installed Kodak easyshare Sofware when I had windows vista so then my hard drive crashed and I have had Windows 7 installed. Koda Easyshare software was accepted but now when I intal the cable to download pics onto my laptop, it says the device failed to install so as a result I cannot download photos. Please, what can I do to rectify this problem? Thanks.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EASYSHARE M1063 Digital Camera

My usb cable won't allow me to install my camera . I put the usb cable into the computer. It comes up with saying found a new hardware but an unknown device. Windows found the drive but your device encountered an error while attempting to download it. help.


It may or may not work, but try installing as Administrator and setting the program's EXE into "Compatability Mode for XP SP2",and also, running as Administrator. Windows 7 just doesn't want to support any hardware over like a year old... Drivers ar ... Vivitar ViviCam 8025 Digital Camera

Pentax problems... Hey there. I'm having problems with my pentax camera. The camera actually works great, but, I can't sync it up with my computer. The software that came with it is not working with my pc. When I hook up the usb cable to connect the two, it never recognizes the device. I have a dell inspiron that's only about 6 months old. It has windows xp on it. I've never had problems installing a device before. I tried to add the hardware manually, over and over again with no luck. I heard s


Load any software first before installing hardware ... Pentax Optio 60 Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

Although Microsoft say that the Minox Leica M3 4.0 is compatible with Windows 7 I cannot get the computer to see the camera.


... Minox Digital Cameras

After downloading software on new Dell PC w/Windows Vista, PC does not recognize that camera is connected and I cannot open the camera window from the start icon.


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot A560 Digital Camera

My HP Pavilion 9000t cannot seem to detect my Canon ZR830 camcorder. Even though the Canon shows "DV IN" when I connect the firewire, after using system restor to roll back prior to Windows update, and after updating the IEEE driver in device manager, the computer can't find it. Annoyingly enough, I was previously able to "see" this camcorder on my computer. No help on the Canon site, and no help on the HP site either.


First check if other USB device is working in the USB slot on your computer. Disable the anti virus or firewall from the system and then connect cam corder . ... Canon Digital Cameras

My webcam is built into my laptop and used to work fine. On windows live messenger it had a webcam icon..but it has now disappeared and i cannot find ACER:webcam on my laptop anywhere, on the start menu or anything. what do i do?


... Acer Digital Cameras

ACDsee software Hi, Your advice on upgrading Windows doesn't actually help me - i need help installing the camera software! I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open


Here is the Pentax Optio S12 software:http://www.freedriverload.com/all43095.html ... Aqua Pentax Optio S12 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0988 seconds