Having problems with your Canon PowerShot A560 Digital Camera ?

Unidentified image when i go to view my photos some of them show up as being an "unidentified image" and i cant view them. why is this happening?


Answers :

Your card may be corrupted or the contacts may be dirty.
Repair Help & Product Troubleshooting for Canon PowerShot A560 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Unidentified image when i go to view my photos some of them show up as being an "unidentified image" and i cant view them. why is this happening?


Your card may be corrupted or the contacts may be dirty. ... Canon PowerShot A560 Digital Camera

Hi, I have an AVLABS AVL961B Digital Photo Frame. I can't get my photos to be viewed screenwide. The left column shows list of filenames, and the right side shows a small image of selected photo. When I select OSD on remote, nothing happens. When I select ENTER, the image disappears. I can't find anything in my manual to help me. If it matters, I have loaded over a thousand photos on a SD card. Hope you can help. Thanks, Connie.


... Digital Cameras

Sony Cyber-shot-n1 ok well, i can view the photos.. that i took before it stopped working but i cant take any new photos or videaos. it just shows a black screen and the lens flicks in and out and eventually a sign saying 'turn off then oon again' comes up and when i do that the same happens over again. i love my camera to bits, it really suits what i do with it soo id love help rather than bye a new one. xxxx


Lens assembly in camera is defective and need to be replaced.Contact nearest Sony service center for better repair.If you want to repair it at your own, let me know to provide you lens assembly part number. ... Sony Cyber-shot DSC-N1 Digital Camera

My Canon G9 has a problem, where everything functions normally, except the viewing screen is black (the functions and menu show up though), and when you take a picture, the image is black. I can still play back photos before this happened and see them on the camera with no problem, but cannot take new photos. Any thoughts?


Look inside the lens while the camera is on - check the iris to see if it's open. It is similar to the iris in your eye. When the camera is in low light, the iris should open wider. Sometime the iris can get stuck due to moisture. Leave it in a dry e ... Canon PowerShot G9 Digital Camera

Yesterday I took some pictures and when I reviewed on camera they all show up. However when I go to download on computer, one photo wont show up. It just shows as an icon. It also has sound on it which I dont know how to remove. I have tried to copy the photo, but it copies with sound and I still cant open the image. Is there anything I can do to get image? I dont understand why it shows up on the camera, but I cant transfer it off the card. Help!


Are you sure its an actual photo? If it has an icon on it, it probably is a standard file that is part of the memory stick software. Should be a very small file. ... Pentax Optio S40 Digital Camera

I am unable to download all of my photos from my digital Canon SD1000 Power Shot. All of the photos show up on the camera and some of them show up with a comment unidentified image; however, not all of them show up when I download on the computer with the cord or through the printer. There are blank icons on the desktop for many of the photos. Is it possible to copy from the camera images? Help, these are photos of a school in Indonesia that we sponsor and now I am back in US and can't get the p


If you are using a memory card, take no more pics until you've recovered the photos, take the card out of the camera. This is to reduce the chance of you overwriting some of your lost photos. There are many good freeware photo recovery software opt ... Canon Digital Cameras

I can't find my photos. I was taking pictures and all of a sudden all the photo I took looked smaller on the screen and said unidentified image. I started playing with the settings and then I think I may have somehow put some of the photos into catagories. Now only a few of the photos show up when I press play. Also, when I took the chip out and put it in a developing station, the photos that said unidentified object didn't even show a picture on the screen. On the the camera screen some do


Categories are just groups of images... when you assign images in multiple categories, then that image will show up whenever that category is viewed or in slide show. however, the memory card might have been corrupted. if your photos are in a memory ... Digital Cameras

Unidentified images When I view images after taking photos, a large number appear as unidentified images or thumbnails and when downloaded appear as ?s and fail to load. Help!!! While loading my pictures from the camera card on to my computer, the pictures came through, but the short movie became a "Unidentified Image". I desperately want to get the movie back. I don't know how my camera card could have become corrupted in the process. Please help me recover the movie.My product os a SD750 Powe


Lost movies can be recovered if your data are not covered, and it's not a hard thing now . And this guide will help you:http://www.gosha ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Canon Ixus 70 will not show image of photo taken on the screen or load to SD card, the photo information shows and I can view images from another card on the screen.If I turn the camera on I cannot se


... Canon PowerShot SD500 / IXUS 700 Digital Camera

Camera had beer spilled over it. Not much but enough to stop it working. I took it to a camera repair shop in Vitnam, The guy said he could fix it and went to work on it, when i got it back it worked perfect for a while and all of a sudden it stopped showing an image on the display. I can however look at previously taken photos. Just cant take new ones. If i take a photo and then check if an image came out (even though i couldn't see an image when i took the photo) nothing is shown. I really hat


Which model camera have you got? you listed in Fuji F470 but your last piece in you description says F47fd. I can offer help either way but please clarify.\015\012Thanks ... Fuji FinePix F470 Digital Camera

Split images Occasionally when I transfer photos taken with my Canon 40D to my computer they are broken in half or thirds and the images switched (the middle appears on the right side of the photo, the left appears in the middle, the bottom appears in the middle, etc.). When viewed on the camera they appear fine. This doesn't happen with all images, typically only one or two per 50. It doesn't seem to matter which program I use the transfer the images (Microsoft XP camera wizard vs. Canon sof


Use good antivirus with updates and then transfer ur images and cd write it\015\012half middle pic is due to speed of ur pc and viruses ... Canon EOS 40D Digital Camera

Unidentified images When I view images after taking photos, a large number appear as unidentified images or thumbnails and when downloaded appear as ?s and fail to load. Help!!!


I have the same problem with my Canon Powershot SX110IS. images dissapear with the notation "unidentified image". I brought my camera in to a local camera shop, and they were able to save the lost images. They told me I had an inexpensive, low quali ... Canon PowerShot SD500 / IXUS 700 Digital Camera

My daughter has an Insignia NS-DSC7P09 digital camera. She had about 400 photos saved on the camera , but the last time she tried to view them, the message "no image available" appeared. When she connected the camera to the computer to try to view the memory card jumbled text appeared. What happened and can the photos be recovered?


This\015\012 is happening probably because the cam's memory card is corrupted. This \015\012is common with SD memory that has been used extensively for a long time \015\012and it's likely not caused by any fault in the camera. You c ... Insignia Digital Cameras

Camera won't show the image on the screen when taking the pictures. I have to use the small view finder to take photos. No image on the display until the photo is taken. How do you sqitch it back to the display set up ?


You don't. The D40 works as SLRs have worked for half a century. Only more recent dSLRs (Nikon started with the D3 and D300) have the LiveView capability that lets you handle your dSLR as a point&shoot. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

My canon ixus70 will not take photos,I can view past photos but it will not show image on screen or record digital image ,if I take a shot all I get is a black nothing. Janis [email protected]


Issue: How do I reset the camera to its default settings? \015\012\015\012Solution: Procedure for resetting the camera to its default settings PowerShot SD750 and SD1000. \015\012\015\012Resetting Settings ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Olympus u series mju 410, has manual sliding cover over lens, when retracted camera wouldcome on and be ready to go. this has now stopped happening, have recharged battery, seems ok. the only way i can get something to happen is if i press and hold the quick view button on the back, i then have a picture in the screen and can view all stored photos, however cant down load etc, have lost manual, but have tried all known button options, i hope its just something silly, thanks neal


... Digital Cameras

Cant view photos copied to the sd card from my computer. the photos show up on the card when I access it using a card reader, but they I cannot view them with the camera.


It doesn't work that way. It's a one-way street...camera writes to card...card plays in computer....not the other way around. ... Canon PowerShot A560 Digital Camera

Corrupted Pictures? There are times when I'll take a "long" photo (1200X1600 dimensions). The camera will take the picture. I will be able to view it on the camera. I'll download the picture to my computer (Windows XP). The download will work fine. I'll go to the folder where the picture is and I can see the thumbnail of the picture. However, when I double click the thumbnail to view the full image the picture won't open. I've noticed this only happening on "long" photos. I've often t


I suggest you always format the card in your camera every time you release it and use in your pc. card may get infected with virus and may affect the performance. never format card in pc! Better save pictures in hdd or cd than in mem cards. ... Canon PowerShot A95 Digital Camera

I dropped my camera and since then I can take photos, the camera focuses, my display is fine when viewing previously shot images and the normal display information but when the shutter is pressed all o see is black. I don't know if the images are being taken or if they aren't. I tried taking of the lense and pressing the shutter and a black box with a **** of light shows. With the lense on nothing but black shows. Is this issue with the lense or body? Any feedback is appreciated.


When you take off the lens and fire off a shot, does the mirror go up and return or does it stay up? If not, is it possible that it is staying up when the lens is connected? When you fire a shot, can you hear it returning? ... Canon EOS 400D / Rebel XTi Digital Camera

Blank photos Everything functions well, except the fact that there is no image on the LCD, nor any image is taken after shooting! It happens randomly - several photos are taken fully functional, with the preview on the camera and suddenly it disappears showing only blank white screen!


This is a CCD sensor problem ( see enclosed image of one taken out of a Cannon camera with similar specs to yours ). Contact Fuji agent as this is repaired under warranty . ... Fuji FinePix S5000 Digital Camera

Canon Powershot A1000IS will show most photos on SD card but some say 'Unidentified Image'?


... Canon Powershot A1000IS Digital Camera

Hi, I have a Nikon S3000. I'm having problems viewing some of the photos on the camera. Some will uplaod to my PC but only show half the photo, the other half is grey. Other photos are totally blank and say ' file contains no image data'. After taking the photos, I checked they came out and all photos were there, so I don't understand where they've gone. Any guideance would be much appreciated. Thanks in advance. Emma Powell


Its memory card problem.Every time format card after transfer at system and less try to delete photo in camera.Some time it give trouble to read memory card ... Digital Cameras

My Canon A95 has horizontal grid lines on the LCD screen AFTER a photo is taken. The view on the screen is normal when you are framing the photo, but AFTER you take the shot, the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the CF card makes no difference, and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the came


If the menus and icons look normal, but images are distorted or discolored, you may have an image sensor (CCD) problem. See Canon's service notice regarding this issue ... Canon PowerShot A95 Digital Camera

My Canon A95 has horizontal grid lines on the lcd screen after a photo is taken. The view on the screen is normal when you are framing the photo but after you take the shot the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the cf card makes no difference and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the camera


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

Inoperable When click camera "on", the lens protrudes only slightly, goes no further and I cannot see an image either through viewfinder or screen; the orange indicator light does not illuminate. Sometimes I hear the camera motor working, but nothing happens with the lens.. When I press "off", camera recedes normally. When I move the lever to view, green light illuminates and I'm able to view previous photos normally. I would greatly appreciate response promptly, since there are some beautiful s


The Zoom mechanizim is faulty- this is a shop repair job.The other possible cause is failing or incorrect battery type.Either will not deliver enough power to operate the lens.So check battery condition/type.IF OK Check Canon ... Canon PowerShot S3 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3392 seconds