Having problems with your Canon PowerShot A560 Digital Camera ?

Dropped the camera on the floor it says: "Lens error, restart the camera" what to do?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot A560 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens Error! I dropped my camera on the floor, and now the lens wont open fully or close. The LCD says "lens error,restart camera." But even when I turn the camera off, it still happens. Its a Canon Power Shot A550. I need to find out how to fix my camera without breaking it some more.


Same problem. The lens is stuck in the zoom position. When the camera is turned on, the lens moves a just afraction like it want to fully open or close, then the camera beeps and prompts with the "Lens Error" Restart Camera. Solutions? ... Canon PowerShot A550 Digital Camera

Camera drop! Ok! So i dropped my camera (canon powershot SD850) on my bathroom floor! its not that broken except when i turn it on it says lens error restart camera? how do i restart it?


You need to take it to a camera shop for servicing, this is not something you're going to be able to solve at home ... Canon PowerShot SD850 IS Digital Camera

Dropped the camera on the floor it says: "Lens error, restart the camera" what to do?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A560 Digital Camera

My daughter dropped my Canon on the tile floor and now the zoom lens will not open. It says "lens error, restart camera." What do I do?


When the camera was dropped, the lens was most likely twisted. So you either have to try to force it back (be gently) or send it in to Canon repairs. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera

Lens Error I dropped my camera and now when i try to take pictures the camera says Lens Error and makes a clicking noise. it also says to restart the power, but when i do, nothing happens..HELP! ASAP!


What do you do if it's a lens error? ... Casio Exilim EX-S500 Digital Camera

I dropped my camera and now the lens won't go in. It says Lens error, restart camera and then it turns off. How do I restart the camera.


The lenses on these powershots are very sensitive... they don't deal with drops, dust or liquid very well.... I've rebuilt several of these and the 560 ...If you're careful and lucky you may be able to put the camera lens side down on a hard smooth, ... Canon PowerShot A560 Digital Camera

How do i restart the camera the camera was dropped and lens is out i turn it on and it says lens error restart camera


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A470 Digital Camera

I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!


It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Lens Error I tried turning on my camera and it sits for a second on the start up screen and then beeps at me and says "Lens error - restart camera." I haven't dropped the camera. I recently plugged it into a computer and correctly disconnected it from the computer. Any suggestions?


Manually rotating sensor rotor inside camera and cleaning gear fixed the Canon "lens error" for me.  \015\012I placed instructions with photo's here: http://www.avh.dds.nl/Fix-Canon-SD600-Lens-Error/ ... Canon PowerShot SD600 Digital Camera

Lens error I dropped my camera that I just recently recieved. When I try to turn it on it says "lens read error restart camera." I want it fixed! but I don't want to pay a lot of money to get it fixed. Any suggestions?


The same thing happened to me:When i tried to turn on my camera it sounded like the lens tried to open and come out but it then stopped as if stuck then the camera beeped a bunch of times and then gave me the black screen with that readin ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I dropped my camera today, and since then, I can't power down correctly. The lens will not go back in, and I can't use the camera at all, not even to view pictures already taken. I get a message that says lens error, restart camera. Can you help?


Try wriggling the lens LIGHTLY as you power off and see if you can get it to go in.\015\012If that doesn't work, I hope you have insurance, as it will need to go in for repair.\015\012It is damaged. Sorry for the bad news. ... Canon PowerShot SD600 Digital Camera

I dropped my camera and it now says lens error restart camera when I try to turn it on, how do I restart my camera? I have a canon powershot SD960 IS.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD960 IS Digital Camera

THE PROBLEM I AM FACING WITH MY CANON POWERSHOT A470 MODEL IS THAT THERE IS A LENS ERROR AFTER A DROP. IT SAYS ON THE SCREEN: 'LENS ERROR, RESTART CAMERA' IT JUST DOES MOT BUDGE. THE LENS DOES NOT COME OUT. HENCE CAN YOU PLEASE HELP ME ON THIS. THANKS.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot A470 Digital Camera

Bent lens I have dropped my canon digital camera. The lens will now not retract and it is bent at an angle. When I turn it on it just says "lens error restart camera" Can i fix this myself?


From what you describe it doesn't sound good. But here's some things that you can do to try to correct it. They only seem to work for about 50% of lens errors, but if the camera is out of warranty they're worth a try:\015\012\015\012 ... Canon PowerShot A520 Digital Camera

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

Om my display is the camera saying: lens error restart camera I put on my camera and now i cant get my lens get in and every time i set on the camera it is saying lens error restart camera. I have also loaded my battery. my mailadress


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon Rebel XT / EOS 350D Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

My husband dropped our canon powershot sd900 in the dirt accidentally.The lens as a result does not retract anymore and when tying to tunr the camera on, it says, lens error, restart the camera which we did but got the same message. ANy idea what the pb is?


Yes you got dirt in side the lens gears and it eather needs repair cleaning. or replacement.you can try a can of compressed air and tap it gently on its side to free the dirt from in between the gears. If you choose to get it fixed let me know I can ... Digital Cameras

I have a camera it's a canon S5 IS i let a friend borrow it he dropped it and now the lens won't go back in it says lens error restart camera i need help


Hi,Lens error occurred due to external shock, Now lens is prevented from properly extending or retracting.1) Avoid applying pressure to the lens and surrounding area:\015\012\015\012 ... Canon PowerShot S5 IS Digital Camera

I drop de camera and now the lens wont retract and when i start it says error problem restart the camera cause dont shut the deam lens


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have a canon sd780is and it says lens error restart camera. did not drop it or anything, just wouldn't close. lens will not close and camera does not function.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

Hello My Camera was dropped with the lens out,LCD screen message say's lens error, restart camera. this does not fix the problem. any idea's please


Slightly tap on the lens barrel while you power it on. I'm afraid that is all you can try at home. I suggest you take it for repairs, maybe they can fix it by just blowing compressed air in it and reassembling it?Don't try to repair it at ... Canon PowerShot SX100 IS Digital Camera

I have a Canon Powershot A460 and when i turn it on there is a message saying lens error, restart camera..The lens will not come out and i never dropped this camera either. I changed the batteries but same thing. Can you help?


Hello,\015\012If this camera is under warranty you should carry it to the Canon Care Center they will replace the Zoom lens unit of your camera, or you need to get it replaced on payable basis as the lens has some ... Canon Digital Cameras

Hi, i dropped my a560 the other day and the end part of the lens bent a little but i managed to put it back in its original form. however when i press the power button the lenses whirrs and tries to open but goes back in and on the screen it says 'lens error restart camera'. Its my friends camera and i dont want to give it back her in two pieces. please help thank you


Sounds like when you dropped it it damage the gears in the camera that make the lens not work properly , you may want to take it and get it fix by the maker of the camera sorry. ... Canon PowerShot A560 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5324 seconds