Having problems with your Canon PowerShot A570 IS Digital Camera ?

Camera keeps turning off after 3 - 5 seconds. Says busy on the LCD


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Language will not go back to english
Repair Help & Product Troubleshooting for Canon PowerShot A570 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera keeps turning off after 3 - 5 seconds. Says busy on the LCD


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot A570 IS Digital Camera

My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!


There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I just got my Polaroid a800 camera and I plugged in my USB for it. When I turn it on it shows a diagram with : PC, Pictbrigde , Next... what do I do I pressed next but it says busy...please wait! for about 20 seconds then says error, then turns off ! What do I do?! Please notify me! Thank You Rebbeca Burcawitz


It sounds like it wants you to choose between PC and Pictbridge, and then press next. Pictbridge is used for printing directly to a printer, without going througha computer. You want PC, to connect to the pc. It can be difficult to tell which of two ... Digital Cameras

I bought a new canon 50d in july and used it through the summer sporadically in preparation for an overseas trip. Periodically got an error 30 message on the LCD but always ok after turning camera on/off. In India for 3 weeks in Oct. Got the error 30 screen 4-5 days a day during heavy shooting. Internet says error 30 is shutter problem. Does camera store (Ritz Camera in DC) fix this? Camera is barely 4 months old. What should I do? Please keep explanations simple since I am technology challenged


Sorry about the trouble you're having with the camera. I searched the manual for error code 30, but I found nothing.You could try Ritz, but I think you'll find they're probably not set up for repairs. Since the camera is less than a yea ... Canon EOS 50D Digital Camera with 28-135mm lens

I purcahsed a new canon SLR 7D and have an error message on the LCD screen E30. instructions says to remove battery pack or turn off the camera but it seems its not working at all. i have tried so many times but the error message keeps appearing on the LCD screen. What can I do?


According to Canon's Knowledge Base here, this error means that there is ... Canon Digital Cameras

My sony cyber shot keeps turning off saying for use with compatible battery only. The battery is fully charged and is the orginal battery it came with. Sony suggested to repower the camera by holding the power button for 30 seconds with the battery out. This did nothing. Their suggestion was to send it in for service. They wanted about the same I paid for the camera to fix it. Is there anyone that can help me?


Hi,Please elaborate your problem providing us with more details of the issue and the model numberThanks for using FixYa. ... Sony Cyber-shot DSC-W35 Digital Camera

My sony cyber shot keeps turning off saying for use with compatible battery only. The battery is fully charged and is the orginal battery it came with. Sony suggested to repower the camera by holding the power button for 30 seconds with the battery out. This did nothing. Their suggestion was to send it in for service. They wanted about the same I paid for the camera to fix it. Is there anyone that can help me? Please and Thank you


Power the camera with the dc adapter in ..and see if it let you look in the menu ..If it does you should try to reset the settings from the main menu ..setting reset or something called like this ..cause it has a choice over the power source ....prob ... Sony Cyber-shot DSC-W35 Digital Camera

Battery Problem I bought a Nikon Coolpix L12 Digital Camera this past summer and have had no problem until last night. My camera turned off and said "battery exhausted." After changing the batteries twice with new batteries, the lens would open for a second then close and the camera turned off once again saying "battery exhausted." I don't know what happened. I had same problem. No matter how many times I have changed batteries, It works for a second then closes with signal saying "warning batt


These cameras have a internal battery that holds data for the camera to keep its settings. These batteries can be replaced but the camera has to be disassimboled to change it they should be able to be changed at a local camera shop pretty cheap. ... Nikon COOLPIX L12 Digital Camera

Just bought camera. Put batteries in and an sd card. Switched on and the camera keeps saying turn off and turn on again. Done this several times but it keeps saying the same


... Fujifilm Finepix S2980

Transfering Photos I'm using the USB cable provided to connect my XTi to my computer to transfer images. But the EOS Utility software is not allowing me to click on "Start to download images". Also, when I turn on my camera the LCD monitor says "busy" in the top left corner. What am I doing wrong?


Edmerk:\015\012In your case it seems like the software is the problem, try uninstalling it completly and reinstalling it back after a restart of your machine, also check this:\015\012 ... Canon EOS 400D / Rebel XTi Digital Camera

My camera will not work, keeps turning off with new batteries in, lens comes for a second or two and the goes in.error on screen says battery depleted


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Pentax Optio 60 Digital Camera

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

Started having a problem turning on. When i first bought the camera you turned it on and it was instantly ready to take a photo and instantly showed what you were looking at on the lcd. Since i connected to a computer and transfered photos when i turn it on it the lcd stays black for about 20 seconds before it shows what the camera is pointing at and allows you take a photos, Any ideas how I can rectify this? thanks


Sounds like you didn't use the"safely remove hardware" function when you disconnected the camera from the computer and caused a slight problem in the camera. If your pics are safely on the computer, go into the camera menu and find "reset" and follow ... Kodak EasyShare M530 Digital Camera

I tried to film on my camera but it keeps saying card error. now i can not see any of my pics or videos. it wont let me take pics or films either. when i turn on my camera it keeps saying crad error. before this happend it was saying the memory was full so i deleted some videos but now this has happened.


Buy a card reader and use it to download to your computer. Then, insert the card back in the camera, go into the menu and scroll to "format"...follow the on-screen instructions. ... Digital Cameras

I keep getting a "pink" smear down the center of the second photo I shoot. The first photo is okay but the second has this pink smear. I have to turn off the camera and turn it back on to get a seco


... Pentax Optio A10 Digital Camera

I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi


Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras

The following is not a battery problem and the camera has not been dropped. It worked normally, I turned it off, and the next day when I turned it on, here's what happened -- and has happened consistently since then: I turn the camera on. The lens extends fully. I hear 4 distinct buzzing sounds from within the camera. The LCD flashes with an image for a split second. The lens retracts fully. I hear 3 beeps from within the camera. The camera shuts itself off. All this happens in not more


Your camera has a lens error. This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. ... Casio EXILIM Card EX-S770 Digital Camera

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


... Digital Cameras

My camera's LCD screen doesn't show the picture on the screen when camera is turned on, however you can see the picture once you turn the camera off and just want to view the picture. Also, the camera won't keep the picture on the screen to view past pictures, and reverts to turning the camera on and the lens zooms out.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Sony Cyber-shot DSC-W100 Digital Camera

Camera keeps turning on and saying high camera temp( camera will turn off)


Have you tried replacing your battery? Since it is a few years old, that may be the issue. ... Kodak EasyShare One Digital Camera

Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???


Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera

I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do anything


The lens is bad, needs to be replaced. Maybe purchase camera on ebay with broken LCD but good lens. Replacement can be time extensive. Will need #00 or #000 phillips screwdriver and solder iron. Remove 6 exterior screws+2 inside battery door. Take of ... Olympus FE-170 Digital Camera

My camm! I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do


I think thy will say you, replace lens unit. but lens is very expensive, so we can buy new one camera. I have the same problem, i found focusing lens wheel teeth slipping, no parts available, so i covered a gum coat on the teeth. ... Olympus FE-170 Digital Camera

My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FX500 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5868 seconds