Having problems with your Canon PowerShot A580 Digital Camera ?

I turn the camera on and the lens goes out then goes back in and goes blank, can't take photos.. the playback function works OK


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot A580 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I turn the camera on and the lens goes out then goes back in and goes blank, can't take photos.. the playback function works OK


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot A580 Digital Camera

Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth


TIPS:1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!..to fix this... ... Olympus FE-230 Digital Camera

Hi there ...I have the Kodak V803 Digital Camera..a week ago i left the camera in a -10 cold temperature in the glove box in my car..the problem is, when i try to take a shot, after the flash the screen goes dark and the camera goes to a complete freeze, nothing functions anymore ..i can't even turn it off unless i take the battery out, and put it back again..the only thing i can use in the camera and don't give any problems, is recording part, it works fine . any help would be great :(


1. Try to fully recharge the batteries, and then, use them in camera.\015\012\015\0122. Keep your camera in warm environment (not too much close to hot surface) for 2-3 hours.\015\012\015\0123. Now, check your camera performan ... Kodak V803 Digital Camera

My ex Z1000 wont take pictures. i turn the camera on the lens goes in and out some times it looks like its going to let me take a picture and then the lens closes back into the camera and the screen goes black. It looks like the cameras off but I push the play button on top and it lets me view pictures. I don't think its the lens because the lens seems to open and close fine. Ive only used this camera 3 times and it has been stored safely so Im not sure what happened. It will only let me get int


Your camera problem has the problem chance. Fisrt you should try with full charge battery. sometime weak battery cause also. Second main pcb does not resetting every time after taking picture.\012I hope you luck! \012Would you give more detail pr ... Digital Cameras

My Camera turns on But will not take a picture, I push the button to take a picture and it doesnt do anything! I took the batteries out, charged batteries, took out the lens, took out the card, and put them back in, i cant find anything wrong, the button will not work, PLEASE HELP! I have the Canon Rebel XTi.


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Canon EOS 400D / Rebel XTi Digital Camera

When i turn on my camera it turns right back off. The lens will come out as if it is about to take a pic but then it goes right back in. I cleaned the original battery and connections, still didn't work. I got a new battery and it is still doing the same thing, from the 1st time I put the new battery in.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Sanyo VPC-E7 Digital Camera

I turn my camera on and istantly it says zoom error and the lens goes back inside the camera i can view pictures but i cant not take them


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Fuji FinePix A345 Digital Camera

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur


... Olympus SP-550 UZ Digital Camera

My camera is charged but for a while when i turn it on the screen is just black and my pictures do not come out. It has been doing this for a while but on and off and would usually start to work again after a while. Now it hasnt gone back to normal for a long time and i cant take any pictures. i tried taking out the battery and memory card and putting them back to refresh it but it still wont work. Its the last week of school and i need my camera to work asap !


Some times it works and sometimes not, it is due to loose contact.\015\012Try cleaning the battery terminals to remove oxidation and other coating formed due to atmoshphere, ensure memory card terminals are also well cleaned and battery is char ... Digital Cameras

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?


If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera

Good Day. I dropped my Nikon Coolpix L16 camera onto a table. Since then when i switch the device on the lens goes out about a quarter and the goes back in and i get a lens error message. I noticed that when the lens goes out it bends to the right(looking from the top) and gets stuck by something. When i pull the lens a little to the left while switching it on everything works fine. A very small metal part came out of the camera. Any ideas? is it repairable?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

I mistakenly dropped my digital camera a few inches when the lens was out.When i tried putting it off to know if the lens would go back in,it didnt move so i forcefully pushed it back inside.Now, when i try putting it on ,the green light flashes,then goes off and the lens attempts to come out but its like its stuck or something pulls it back inside.from what i noticed the camera cant come on without the lens coming out.pls i really dnt know what to do


You've likely jammed the zoom motor in the lens. You're correct in thinking that the camera can't work without the lens out. With it being physical damage repairs wouldn't be covered under warranty so you either need to pay to have it repaired (if th ... Digital Cameras

When i turn on my camera, the lens goes in and out about 3 times, and finally turns on. when it finally turns on, it says turn off and turn back on immediately! i can look at pictures and videos, but cant take them.


Hello,The lens of your camera has been stuck.You need to go to Canon authorised service center. They will replace the optical assembly.ORYou can give it to an expert for repair, he can repair it without replacing t ... Canon PowerShot A540 Digital Camera

My camera my camra was working good lastnight and now im trying to use it and its now wanting to work.the lens will not come out when i turn it on.it goes right to entering favorites.and wont let me do nothing.ive already changed the batteries 3 times.can u please let me know what i can do.i do not have my reciect to take it back.


The digatail camera and the screen is white and black screen. how i fix it? ... Kodak EasyShare C613 Digital Camera

I have a Panasonic Lumix DMC-LC50 and whenever i try to take a picture the lens comes out and automatically goes back in and then says "please turn off and on the camera again". I kept doing what it said but it keeps doing it so i bought new batteries but its still doing it. So how do i make it work again? Thanks, ANa


Hm.Maybe you should just stop being a **** and walking the streets at night so your parents can stop calling wondering where the ******** are you dumb ****.Oh yeah about the camera.I already have lots of pictures of your slutty *** so what the **** d ... Digital Cameras

Problematic Camera I have a EasyShare DX4530 which has suddenly started acting funny. Here's the sequence of events: - power up works fine - lens comes out ok - green light glows steady, ready for a picture - picture takes fine - green light doesn't turn on again - no amount of pressing the shutter button will bring the green ready light back - pressing the SHARE button a couple times (sometimes 2, 3, even 4 times) will move thru the share sequence and then finally exit that function, turning


I just discovered that the real problem is a STICKY SHUTTER BUTTON, staying down after taking a picture. This prevents the green ready light from coming on until I jiggle the shutter button. It has actually started to be hard to press, making a defin ... Kodak EasyShare DX4530 Digital Camera

My Canon 40D locks up when I click the shutter and the blue printer light next to the menu button is flashing. All the LCDs go blank and all functions stop working . Originally I was using a vertical grip and it still would not come on when I took the batteries out but after I detached the grip the camera did come back on . Now I'm not useing the grip and I still have take out the batteries and re-insert and turn back on camera to make function work again. Everything looks normal but the same th


... Canon EOS 40D Digital Camera

Lens error I've had my camera for about 9 months and it's been working fine. 2 weeks ago I turned it on, went to take a photo and instead got this "Lens error" and the lens won't retract back in and the camera won't do anything. Sounds like this is a typical problem. Anything I can do to get my camera working again?


Try these procedures. ... Nikon Coolpix L11 Digital Camera

When I turn on my Panasonic DMC-FX55 the lens comes out fine and the screen displays for 2 seconds then goes blank except for the message 'Turn off then on again' - which doesn't work. The only way to get the lens to retract is to select 'Playback' - tun off then on . The playback mode works fine and after 10 econds the lens returns to closed position. Is their a combination of buttons that reset the camera??


... Panasonic Lumix DMC-FX55K Digital Camera

Camera had beer spilled over it. Not much but enough to stop it working. I took it to a camera repair shop in Vitnam, The guy said he could fix it and went to work on it, when i got it back it worked perfect for a while and all of a sudden it stopped showing an image on the display. I can however look at previously taken photos. Just cant take new ones. If i take a photo and then check if an image came out (even though i couldn't see an image when i took the photo) nothing is shown. I really hat


Which model camera have you got? you listed in Fuji F470 but your last piece in you description says F47fd. I can offer help either way but please clarify.\015\012Thanks ... Fuji FinePix F470 Digital Camera

Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.


This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

LENS ERROR my Nixon camera was working fine one moment, I was taking pictures and then after I turned it off, I went to turn it back on and it starting zooming and making the urghtt noice as it focused in and out. it does that several times and then the lens error notice shows up on the screen. then i press power and it turns off, but when i turn it back on, the same thing happpens. In the LCD display at the back the image we try to take looks like a pic in a TV with bad signal, I tried to clean


This seems to be a problem with switch and the sensor inside the camera, Some time it works on magicaly like nothing has happend, After having this problem I have to on & off the lens for 3 or 4 times and clean the lens and 3 small holes in the f ... Nikon COOLPIX S200 Digital Camera

Toshiba PDR-M700 When I power up the camera, the lens will not come out and sometimes will come out all the way to maximum zoom. When I power off with the lens out, it clicks as if something is stripped or loose. After shut down, I can push the lens back in. Once in a while the camera will work but eventually the "Lens Error" message comes up. This was a good expensive camera when I bought it but taking it in for service would probably cost more than the price of a new camera today. Can you sugg


It sounds as though the drive gear is slipping... If you give up on trying to repair your camera I may want to purchase it for parts (my sister-in-law broke my LCD display)[email protected] ... Toshiba PDR-M700 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5916 seconds