Having problems with your Canon PowerShot A610 Digital Camera ?

Blank screen on Canon A610 Power Shot. Can't view pictures taken or from memory card.


Answers :

Are the downloaded pictures also black when viewed on your computer? If so, a stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open). \012To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help.\012
\012
Repair Help & Product Troubleshooting for Canon PowerShot A610 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blank screen on Canon A610 Power Shot. Can't view pictures taken or from memory card.


Are the downloaded pictures also black when viewed on your computer? If so, a stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera ma ... Canon PowerShot A610 Digital Camera

When i turn my camera on the screen is all fuzzy.I can view the pictures on the memory card on the screen but when i turn the switch to take pictures i cant view anything apart from a fuzzy screen.The camers is an canon isux 11 about 4/5 years old


It sounds like your LCD display is on its way out. ... Digital Cameras

Lens I have a canon power shot a 510. When I turn the camera on the display as far as the start up screen is fine but the screen is black when you try and take a picture. The lcd screen is fine, if you put a memory card in you can view all the pictures on it. It will not take any new pictures.


You might have switched off the display by mistake, which is used as a power saving option and can be switched on by pressing the display button. ... Canon PowerShot A510 Digital Camera

My Canon A2200 has a white screen when I turn it on and stays that way can't see what I am taking a picture of or any menu items . It still takes pictures but cannot view them on the camera and don't really know what I am taking pictures of. Is there anything I can do to correct this. I have chrged the battery fully taken out the memory card and battery and still nothing.


... Canon Powershot A2200 14.1mp Digital Camera red

I have a Sony DSC-S950 Cyber-shot. I opened some pictures in the computer using PhotoShop to view and rotate pictures. After I rotate pictures and I resaved them back to the memory stick card, I can't view them on the camera. I only see a blue screen with File error on it. However, I still can see and reopen these pictures through the computer. Can I still print these pictures from the memory card? How can I restore back these picture files? I want to view them on my camera. Please help.


Hello,\015\012You have changed probably the format of your pictures.\015\012Please check the files on your computer. Be sure that they have saved as original name and JPEG format. Not as other picture formats. ... Sony Digital Cameras

Hi, I forgot to insert back my memory card to my Panasonic Lumix LX3 one time and instead used its internal memory to take pictures. How can I extract those pictures to my computer? i cannot find its folder. Also, when the memory card is inserted in the camera, there are black screens that appear. But if the memory card is not inserted, the pictures taken using the internal memory can be viewed. HELP!


The image on the internal memory can be accessed only by connecting the camera directly to your computer. Assuming that you are using a Windows-based PC. If you are using Windows XP or a later Operating System, you do not need to install any driver f ... Digital Cameras

When I turn on my Dimage E500, I get a blank black screen. I can review the old pictures taken on my memory card through my camera with no problems. I just cant take new pictures and if I try the pictures come out black like the screen. I have changed my batteries and memory card but nothing has helped. Please help me. Thank you Nicole


Check that is not the shutter that is stuck ... Digital Cameras

CANON POWER SHOT SD750 DOESNT TAKE PICTURES BLACK SCREEN


Mine started working again. The only thing I can attribute to it is that I zoomed the lens in and out several times. The next time I turned it on, it worked. Go figure. I'll update if things change. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have a new canon power shot a580 and have used a kodak 2gb memory card. I started with an empty card, took approx 30 pictures and then "memory card error" shows up on my little screen. I can't retrieve the existing pictures or take any new ones. I'm new to this digital camera thing.. What should I do?


Did you format the card in the camera first to initialize it? Use a card reader to download any pictures on the card to a folder you create on your desktop. Then, format the card in the camera. ... Canon PowerShot A580 Digital Camera

When I view my photos I have already taken they look good until I try to zoom in, then the photos go fuzzy in multiple color stripes taking over the screen. Will my photos be fine when I load them to my computer? Is this my camera or my memory card. I put someone else's memory car in my camera and could zoom in and it was fine. I put mine back in my camera, took two pictures, and could zoom in on those photos and it was fine, but not on the previous pictures I have taken. I did plug my camera


Fuzzy pictures are most often caused by not holding the camera steady enough it's the number one problem with shooting "Live View". It's not the camera nor the memory card it's the person that's taking the picture. Sorry if that was to blunt. Now say ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Hi, I have a Canon Power Shot S2 IS 5.0 megapixels that was working fine until one day I changed the memory card from 512MB to a 1GB. Now every time I turn the camera on and try to take a picture, a beeping sound and a legend on the LCD screen that reads: Memory card error. It's like something locked the shutter mechanism. I tried other memory cards with the same results. Thanks, Roger.


Its possible that there may be an error on the camera try to reset the camera by \015\012\015\0121. Turn the mode lever to the camera or play button\015\0122. Press and hold the MENU button for more than 5 seconds.\015\0123, T ... Canon Digital Cameras

Cannon Camera I can take pictures and can only view the last picture taken only. Also the function or menu button does not respond. Some time ago I was able to scroll forward and backward when looking at my pictures taken , the i could only scroll in one direction only. Now it does not scroll at all. I take beautiful pictures and can still download from my memory card. The selection mode button stop working so I can't take movie shots


Obviously a faulty button switch, your camera will need to be taken aprt by a proffessional repairer to solve this one, it will require a complete membrane swaitch assembly comprising all buttons, as they come in one unit. will possibly cost more tha ... Canon PowerShot S410 / IXUS 430 Digital Camera

I hit Format in error and lost 200 -300 pictures I had just taken on holiday. I have tried the program Memory Card Recovery, but couldn't assign the camera to a lettered disk as required. The card couldn't be read on my computer either. The screen then indicated that the card was 'locked' whatever that means, and that there was 'a memory card error'. I hope you can help me. Thanks Power Shot A570 IS


I am afraid all is lost since FORMAT was used. That will erase all photos permanently ... Digital Cameras

Hi i have a Canon Powershot A610. I have a loose wire, I think in the screen or the body of the camera, not sure what the problem is. Everytime I take a picture you cant see what you are taking a picture of because the screen is all black. So, when you go and look at what you have taken under the play button it shows a blank/black screen. I don't know what to do, please help me!


... Canon PowerShot A610 Digital Camera

Black screen The screen is black when I turn the camera on, both on the flip out screen and if I use the view port...and yes, the lense cap is on. I have a Canon Power shot S21S and my view finder is black, but I can see the pictures I have already taken just fine when I switch the camera over to playback.


Sounds like you have a bad CCD. You can try contacting Canon to check out your options on how to get this repaired. Unfortunately the S2IS is not on their CCD recall list of cameras. ... Canon PowerShot S2 IS Digital Camera

Black screen Yesterday I grabbed my camara for a not to be missed shot and found that I too have the same problem now of the black image through the view finder and on the lcd screen. I have replaced the batteries, tried changing settings and nothing works. I too can see the icons and view previously taken pictures but can take no new ones. I feel that paying $350 for a disposable camara is a bit much! I purchased it just a little over a year ago. I saw on the Canon website that they are fixing


This happened to me then my camer just started working again after playing around with the modes ... Canon PowerShot S3 IS Digital Camera

I got my Canon a590 this past christmas; since then, every so often, it will not show any image on the screen. All I can see is the menu options. Every time I want to take a picture, all I get is absolute black. However, I can view pictures on a memory card with no problem on the main screen. The last 3-4 times this happened, the problem usually went away within a few days. I've tried replacing the batteries, but to no avail. Is my lens bad, or is it due to a more intricate problem?


Your camera should still be covered under the one year factory warranty. I would go to the Canon website and contact them for a covered repair if I were you.\015\012\015\012Best regards,\015\012Bob ... Canon PowerShot A590 IS Digital Camera

Memory card locked - that's the error message that shows up on the screen. I can't take pictures or review shots already taken....how do I 'unlock' my memory card?


Hi jodybuggie\015\012I know this is obvious, but have you tried sliding the little white lock tab on the side of the card back away from the contacts end? ... Canon PowerShot A560 Digital Camera

The screen on My Canon Power Shot SX 120 IS camera will not show any images when I turn it on. It simply shows black, if I take a picture, the picture will record on the memory card but it is also just a black picture. Any ideas


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot SX100 IS Digital Camera

When ever i turn my fujifilm s5000 on the screen is white in both viewing taken photos or when trying to take a photo in both lcd and eye piece you can still change the date ect. and even scrowl thru memory card {white screen still} as if you were looking at the photos it tales you the code number of the photo or if its a video but still a white screen sometimes when you flick it to take a picture it comes up with the image then turns white and some times flickers of black lines go thru the scre


Hi,Have you tried to Use the Camera After Pulling out the Memory Card?If not Try it and let me know.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Digital Cameras

My Canon A95 has horizontal grid lines on the lcd screen after a photo is taken. The view on the screen is normal when you are framing the photo but after you take the shot the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the cf card makes no difference and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the camera


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

FinePix A345 When i switch on my camera it keeps going to - Quality 4Mf 368 Frames and won't let me do anything, cant take a picture. It will also only let me view the most recent picture taken, won't let me go through the pictures that are on the memory card.


Get the images off the card.\015\012Plug to your computer and download them.\015\012Then reformat the card in the Camera.\015\012If your computer is a Windows ME/2000/XP/Vista you will not need any extra software to do this.\015\012Windows can do it ... Fuji FinePix A345 Digital Camera

My Canon A95 has horizontal grid lines on the LCD screen AFTER a photo is taken. The view on the screen is normal when you are framing the photo, but AFTER you take the shot, the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the CF card makes no difference, and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the came


If the menus and icons look normal, but images are distorted or discolored, you may have an image sensor (CCD) problem. See Canon's service notice regarding this issue ... Canon PowerShot A95 Digital Camera

Canon powershot s1 is this camera shows a black screen all the time except when putting camera to display mode, when it will show previously taken pictures. I have tried changing batteries and memory cards. I have also tried taking a 15 second picture and removing and inserting batterise to no avail/ Any ideas?? ian


See this link. The details apply to US residents, but the service n ... Canon Digital Cameras

My Canon PowerShot A85 no longer shows scene on the LCD screen before shoot nor immediately afterward and records a blank on the memory card. Photos taken before this problem started can be viewed on the screen in review mode. Otherwise camera feels normal, i.e. turns on and off, zooms, sounds like it recorded a photo.


I called Canon customer service. Problem is likely due to a defective CCD image sensor. The camera is well beyond warantee, but they will fix it free including shipping both ways. No proof of purchase needed.I can't get the web site pasted i ... Canon PowerShot A85 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8661 seconds