Having problems with your Canon PowerShot A620 Digital Camera ?

I have a problem with the lens of my camera. whenever i open it, it makes a weird sound. then the screen goes black and displays 'E18'. how do i fix it?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot A620 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a problem with the lens of my camera. whenever i open it, it makes a weird sound. then the screen goes black and displays 'E18'. how do i fix it?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A620 Digital Camera

A95 Trouble My camera will not turn on. If i press the on/off button the little green light goes on, the lens starts to extend out, then a beeping noise sounds and it shuts off. On the screen, its black and a tiny code is displayed on the bottom that says "E18"


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot A95 Digital Camera

My Canon Power Shot A80 Digital camera goes ON but only shows the screen name Canon then the lens goes back into off - some sounds come on and then E18 shows in the lower left of a black screen. Help.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A80 Digital Camera

When I turn my cybershot on, the display screen is black, then lens goes in and out a couple times and then it ask to power the camera on and off again. doing this does not fix the problem. Any help?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-shot® DSC-W50 Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Lens error My coolpix L4 was working perfect. Then, I went to turn it on and it said "Lens Error" on the screen. None of the buttons will function and the lens is frozen out. When I turn it off, the screen goes black and the lens remains in the out position. I tried replacing the batteries and cleaning the lens with a soft cloth, but it didn't help. Can you tell me how to fix it? Thank you!


I had this problem i turn my camera on the lens came out i turned them then my camera stop sayind lens error but now my pic is not clear ... Nikon COOLPIX L4 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Black Screen Everytime I turn on my camera, it goes to a black screen. I have to literarly hold the lens for it to work. It's happened before, but it's alwas fixed itself. However, this has last for a couple of days now.


Lenses may have dust trapped I found when I wiped it with a dry paint brush it cleared this problem however rembember that a brush will also push dust down futher so when it did this a 2nd time I actually gave it a tap on the bottom of the camera and ... Panasonic Lumix DMC-LZ2 Digital Camera

Focus error I am from the Caribbean Island of St.Kitts and I was on holiday in London, England in August 2006 and I bought this camera. It worked wonderfully and I took plenty pictures. I had no problems at all with it until now. When the camera was turned on there was a sound coming from the lens area. The lens are open and will not close. On the screen there is the warning display "focus error." Can I get a solution to fixing this problem Screen says focus error , makes noise.


Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Fuji FinePix A500 Digital Camera

Hi, I have a Canon IXUS 95IS camera.. For some reason, when I attempt to take a photo, the LCD screen isn't displaying what is actually in view? In movie mode it comes up on the screen but when i flick it to Auto or camera mode, the screen goes black and only shows the little icons... Weirdly enough, it still takes the picture but the really annoying thing is it doesn't show up on the screen what you're taking a photo of so it makes it really hard for the person taking the actually photo... can


Ah yes! you have pressed the display button. Turn the camera on and you see the icons in the display, look for the Disp button and press it, the display will cycle through its modes icons, black, image and icons. ... Digital Cameras

Lens Error. My Nikon COOLPIX L3 keeps on saying " LENS ERROR" and wont close up. Also it make some rattling noise when i press the on/off button or sometimes does it by itself. First the screen is black then it goes to the welcome image last it says "LENS ERROR". How can I fix it myself? If you found out the solution please message me on myspace.


Nikon coolpix 4 lens error help! ... Nikon COOLPIX L3 Digital Camera

Len I dropped my camera and it hit the ground lens frist. now when i turn it on it makes a weird sound and the lcd screen shows nothing then it turns off after like 4 secondsand the lens goes back in wat should i do ?


Camera lens has problem.need repair lensmydc digital camera reapir ... Casio Exilim Zoom EX-Z700 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

As soon as i turn the camera on, the lens goes out, then retracts and does this several times. sometimes it makes an unusual elctronic/mechanical sound. it stops retracting and sending out the lens after about the 3rd or 4th time, the screen then says "lens error". from here i can not do anything but turn the camera off. how can this be fixed? this is a nikon coolpix s550


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Nikon Coolpix S550 10 Megapixel Digital Camera (Graphite Black) with 5x Optical Zoom + 4GB Memory Ca

Sony cyber-shot 7.2/display screen is black and won't take new pictures. when switched on the display says turn the power off and on again. But when I switch it back on again the zoom lens goes in & out 4 times & then the display just show the same again.


CCD Failure!known problem contact sony for free repairs dont worry just call them they will do it even if u are out of warranty see this for sample advisory and problem detail ... Sony Cyber-shot DSC-W70 Digital Camera

When i turn my camra on the lens comes out and my screen is black and then it goes back off but the lens does not go back in when the camera is off how do i fix that???


The problem you are describing is a problem with a sensor inside the lens assembly of the camera. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service.\015\012\015\0 ... Olympus FE-20 Digital Camera

I turn on my Pentax Optio e60 camera, and the lens opens, but i dont think it has extended to its maximum. and the display screen is black and i cant take photos and it says 'lens error 0x4110000' then turns itself off. very annoying and please help me fix it.


See http://www.fixya.com/support/r13011856-lens_error ... Digital Cameras

When I turn the camera on, it buzzes four or five times (a sound I have never heard it make before) then displays "Please turn the camera off and then on again". When I turn it off, it buzzes again two or three times, the screen goes blank, but the lens does not retract. The battery is charged, and the problem is the same whether in picture or display mode, whether plugged into the computer or not.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ50 Digital Camera

Focus error I am from the Caribbean Island of St.Kitts and I was on holiday in London, England in August 2006 and I bought this camera. It worked wonderfully and I took plenty pictures. I had no problems at all with it until now. When the camera was turned on there was a sound coming from the lens area. The lens are open and will not close. On the screen there is the warning display "focus error." Can I get a solution to fixing this problem


Check out this link: www.digitalcamera-hq.com/digital-cameras/fuji-finepix-z1_question.html?qid=4289 ... Fuji FinePix A500 Digital Camera

E18 My camera lense is trying to adjust and just clicks back and forth back and forth until the screen goes black and e18 shows up. Should I take it to a repair shop or is this something that I can fix on my own? A


If your camera is still under warranty, the best thing you can dois to take it to the nearest official Canon repair shop and Canon Digital Cameras shouldfix it for free.If your camera is out of warranty, or if Canon refuses ... Canon PowerShot S2 IS Digital Camera

When i turn my camra on the lens comes out and my screen is black and then it goes back off but the lens does not go back in when the camera is off how do i fix that???


Repeated issue ... Olympus FE-200 Digital Camera

E18 First the LCD screen showed a blur of colors. Now when in the review mode, it only goes to black, with a buzzing sound followed about 5 beeps then an E18 message. Haven't dropped it, immersed in water or anything unordinary.


The following blog outlines some repair options for an E18 lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A70 Digital Camera

I am having a problem with my camera. It works in the sense that it turns on and takes pictures. However, the both the digital lcd display and normal finder display remain black, even after removing the lens cap. I let a friend borrow it a little while ago and I suspect they may have changed some settings, but I'm not sure what to look for to fix it. When it takes pictures, they come out looking very distorted and strange. But, it does take pictures, the flash goes off and a picture records. c


Please check out the Sony support website here: http://esupport.sony.com/US/perl/news-item.pl?mdl=DSCF717&news_id=161 ... Sony Cyber-Shot DSC-F717 Digital Camera

My son dropped my Canon powershot SD450 while it was on, and the nose was out. I can still view photos, but the nose (or shutter... not sure what to call it) is stuck out and whenever I turn it on it beeps (the screen is black) and the screen displays "E18" in the bottom left corner. When turned on, right before the beep, the nose sounds like it is trying to extend, but almost like it is jammed. Is this fixable??


Definately fixable! The e18 error is just a lens error from when it was dropped. The site that specializes in the repairs on the Canon Powershots is: www.camerasandparts.com ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3337 seconds