Having problems with your Canon PowerShot A620 Digital Camera ?
Can I use 8GB SD cards in my Canon Powershot A620 camera? I thought I once read that it will only support up to 2GB SD cards.
The A620 uses MMC and SD cards. SD cards max out at 2GB in size. Larger cards are actually SDHC or SDXC cards and will not work in the A620.
Yor camera can use either SD Memory Card or MultiMediaCard. The manufacturer tested the camera with a max size of 2GB SD card. 4GB and higher SD cards are SDHC cards. You cannot use those cards. There are no SD cards above 2GB.
Repair Help & Product Troubleshooting for Canon PowerShot A620 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Can I use 8GB SD cards in my Canon Powershot A620 camera? I thought I once read that it will only support up to 2GB SD cards.
The A620 uses MMC and SD cards. SD cards max out at 2GB in size. Larger cards are actually SDHC or SDXC cards and will not work in the A620. ... Canon PowerShot A620 Digital Camera
Can I use a SDHC card in my Panasonic DMC-TZ1 digital camera or do I need to stick with normal SD cards? I have read conflicting reports saying that a 2GB max SD card is the only supported card for this camera? Others have said a SDHC card will work. What is really true?
According to the TZ1 manual the maximum size of SD hard is 2gb. You cannot use the new format SDHC card as it is not recognized. ... Panasonic Lumix DMC-TZ1 Digital Camera
My canon rebel xsi was working a month ago. Today I took it out from the case and found it was not reading the card (8gd transand). It had been working fine until last time I used it mid of April. Thought it was a card problem, I went out to buy a new one (8gb sdhc), put it in and it asked for reformat. Proceed to reformat the card, but it says it can't reformat it and ask to change the card. Put in the old card (which was loaded with picture I previouly took), it asks the same thing. I'm 100% s
The reader in the camera has gone bad. You can get it repaired by anyone who fixes camera's or by sending it to Canon which will cost you more then finding someone in your home town that repairs cameras. Just FYI the repair is somewhat costly roughy ... Canon Digital Rebel XTi Digital Camera
My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just
Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera
Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch
You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras
My Kodak C190 will not read the card. I cannot format it in the camera because IT WON'T READ IT IN THE CAMERA. I keep seeing the same answer - "format in the camera" - but it can't read it. Now what ? I have I tried three other cards of varying sizes - 2gb, 4gb, 8gb, and 16gb - none were able to be read. The camera works fine with its internal memory, but that doesn't hold much at all. Any help would be great - Thanks
Can`t you format it on your PC ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD
Im using 8gb SDHC card (scandisc) camera keeps reporting read error or write error. won't download photos, locks up etc, etc. lost many holiday photos. It is only 6 weeks old.... should Ijust use 2 mb SD - ie non HC cards or XD????
Some Sandisc cards cause problems with S1000fd, when using the flash.\015\012Try updating the firmware:\015\012http://www.fujifi ... Fuji FinePix S1000FD Digital Camera
Nikon coolpix S51 camera with 2GB Ocz card. Card works fine in the camera and PC can read fine from the camera thru USB connection. But when I put the card in card reader Windows XP sees the card but says that it is not formatted and asks if I want to format it now. Nikon transfer does not see the card either. Should I format it in Windows first and then use it in the camera?
Try formatting it w/ windows first the try it in the camera, if it wont work, the camera & your computer might be using a different file formats ... Nikon Coolpix S51c Digital Camera
Card error I have been using my camera for almost a year with no difficulties. Today I turned it on and it is reading card error. the card is Fujifilm xD-Picture card M 2GB. my camera is a fuji finepix z10. I took the card out and put it back in but no luck. Any suggestions?
TRY TO FORMAT THE CARD INTO YOUR PC, USING A MEMORY CARD READER. ... Fuji FinePix Z10fd Digital Camera
I have a Canon EOS 350D SLR (calle the EOS Digital Rebel XT in the States) that has been used daily for two years without a problem, up to now... When I switch on it gives the message "CF Err". I have removed the 2Gb CF card and it reads perfectly in a dedicated card reader. Having backed up the pics on my PC I then tried to format the card in the camera but got the message "Err 99". I then formatted the card in the PCs card reader/writer but the camera still wont accept it. I have just tried a
Turn the camera off and remove the lens and then re fit the lens and switch back on. Also cleaned the lens contacts. \015\012Err 99" includes memory card, lens contacts , battery contacts, in fact just about anywhere.\015\012\015\01 ... Canon Digital Cameras
When turning on the camera, the card reader light flashes sometimes for a full minute before you can take a picture, I am using a Olympus xD 2GB memory card which works fine after the card reader light quits flashing. Is there some setting that I need to set to get the camera to quit reading the whole card every time I turn the camera on. I formatted the card on the camera.
Are you saying that even with an empty card, it still takes that long? How are your batteries? Fresh or old? ... Olympus Camedia C-60 Zoom Digital Camera
Nikon Coolpix 4600: Problem: It won't take any photos, it reads: THIS CARD CANNOT BE USED. The card is 128 MB. I purchased a new card: 2GB but it won't work also. My manual says to clean the contacts but I cleaned the contacts on the card. How do you clean the contacts in the camera or there another problems?
1) Have you formatted the cards?\015\012\015\0122) Try the cards in the card reader in your computer to see if they can be read. \015\012\015\0123) Try the "switch off camera - remove and replace battery - switch on camera" tr ... Nikon Coolpix 4600 Digital Camera
Memory cards I'm not sure my PC can read the SDHC cards, so since my camera came with an SD card, I plan to get the 2GB SD cards. Or do I only need to worry about compatabiliy if I'm using a separate reader? On another issue, what does the "class" designation signify? I've seen Class 2, 4 and 6.
Your PC will be v unlikely to be able to read the HC cards. With a separate reader, via USB, you shouldn't have a problem, as long as the reader itself is HC ready.\015\012You could use 2Gb cards and not worry about it of course!\015\012 ... Canon PowerShot A590 IS Digital Camera
I have a easyshare c330 with firmware version 1.07 and it can not read the 2gb sd memory card. I have tried the same card in another card and it works fine. Is there a parameter that can be set for the c330 that would enable the use of the 2g card?
There is no parameter that can be set for the c330 that would enable the use of the 2g card.\015\012Sorry your camera is only supporting: SD/MMC up to 1 Gigabyte ... Kodak EasyShare C330 Digital Camera
Have a 2008 dell xps-1 with a built in card reader. Running windows vista. The system used to read the card and download automaticly now it doesn't ? the card is a 2gb sd from dane-elec. It works on all of my other computers
It's not unusual for Windows updates to mess up the registry and cause problems with the card reader slot. The easiest solution is to get an inexpensive card reader that plugs into a USB port on your computer. They always work.\012 ... Canon Digital Cameras
I keep getting the error card not recognized when trying to use an Olympus M+ xd 2gb memory card. How large of a memory card will this camera support?
From what i know and i own a Fuji FinePixA360.According to the Manual 1gb is the highest amount of memory listed.Also you can not put a M+ (high speed) card in the camera will read error.Bascially the Fuji is an older camera and was designed for 1gb ... Fuji FinePix A360 Digital Camera
Hi, I have a Fujifilm digital finepix A340 and I was using a 128MB memory card; then I decided to buy a new memory card for 2GB and then the camara does not read the memory card. What do I need to do? thank you!!
I can't find mention of a maximum storage capacity for memory cards for this camera but, given that it only has a 16mb card provided then it is highly unlikely that a 2 GB card will work. I have had this problem with a Nikon camera - tried using a 4 ... Fuji FinePix A340 Digital Camera
I bought this camera off of an realestate agent, she said it wasnt very old and that it worked great, it didnt have a memory card in it she said i would haft to get one. I have gotten 3 differnt ones and they all say it cant be read. I talked to a walmart associate and she thought I needed a 1 gb memory card for that camera so I got one off line and it still does the same thing. I put the same memory card in another camera and it works just fine. I have this nice camera and I cant even use it
Your camera is only supporting: SD/MMC up to 1 Gigabyte\015\012The card that you currently have might be high speed HHC. All should be sorted if you change the SD card to the supported MMC SD card. ... Kodak EASYSHARE CW330 Digital Camera
I have a brand new Lexar platnium 2 8gb cf card. When I insert to my sony a100, the camera ask if I would like to format the mem card. I click yes and the the camera reads "unable to use card" can you please help??
The card may be locked, Does it have a tiny switch on the side set to the locked position? ... Sony Alpha DSLR-A100 Digital Camera
CAPACITY Problem I am using a 2GB Kingston CF card on my S9500, and at 5MP it can store up to 1000 pictures. Recently I had it formatted on a computer and when I inserted it back to my camera, the capacity went down to 590 pictures! i thought it caught a virus or something so I scanned it, then formatted it on the camera. but the display still says I got 590 shots left. so I reformatted it on another PC, and on Properties it says 0 usage so i'm positive there's nothing wrong with the card. Now,
1. Connect your camera to the PC.\015\0122. Download the latest firmware\015\012 http://www.fujifilm.com/products/digital/downloa ... Fuji FinePix S9500 Zoom Digital Camera
Camera screen started showing "processing" after taking a picture, but the picture doesn't save....and now the memory card will not read in my PC card slot.(other sticks/cards still work fine on the PC). I have had to use the USB nable to download. Any thoughts on what is causing the problem or if the two issues are related?
Sounds like a corrupted memory card. ... Kodak EASYSHARE Z1485 IS Digital Camera
I am using a Panasonic DMC-FX100 with a Delkin Devices SDHC 8GB card. Am unable to down load pictures because of 1 only picture on the card has a read error which is preventing the complete down load taking place. Can anyone offer a solution or where to find advice please?
First try to recover all the images with a program like the one you can download here, which is free:-http://www.easy-flash-recovery.com/Then for ... Panasonic Digital Cameras
Is there a limit to the size of the SD card I can use (like 2GB)? I've tried 4GB and 8GB cards and the camera says they need to be "formatted". Is there a way to format outside the camera?
Hi,\015\012\015\012You can format the card using your PC.\015\012\015\012Please see my FixYa Tip on this subject here\015\012 ... Kodak EasyShare C875 Digital Camera
Put 2gb card in, only seems to read as 1gb? any thoughts on how to get 2gb?
Why do you say it reads as only 1Gb? I would recommend verifying it on your computer... ... Casio Exilim Card EX-S100 Digital Camera
I just got a second hand bought Kodak EasyShare C913 camera. After I got it I took only 7 pictures, after that it wouldn't let me take any others because it would say 'internal memory is full.' I just bought an 8gb memory card and I'm pretty sure I programed it so the camera reads that it's memory goes on the card and such. But it still says the memory is full and I'm not sure why. I don't know much on cameras I just want to use it for pictures and then to upload them onto my computer. Please he
The C913 is designed to work with SD cards. Your 8GB card is actually an SDHC card. While SDHC cards will fit into the slot, they will not work. You need to use SD cards 2GB and smaller. ... Digital Cameras