Having problems with your Canon PowerShot A630 Digital Camera ?

Autofocus off How do I adjust the autofocus feature on the device. I can see when the lens moves, it passes through the focus point. I could lay out a tape measure to see where it is in focus if necessary.


Answers :

Is this when you are trying to focus on something close up? If so you want to go into Portrait mode (turn dial to little head) then hit down arrow on the wheel once to MF mode (manual focus), then use the left and right arrow to focus specific inches or cm.
Repair Help & Product Troubleshooting for Canon PowerShot A630 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Autofocus off How do I adjust the autofocus feature on the device. I can see when the lens moves, it passes through the focus point. I could lay out a tape measure to see where it is in focus if necessary.


Is this when you are trying to focus on something close up? If so you want to go into Portrait mode (turn dial to little head) then hit down arrow on the wheel once to MF mode (manual focus), then use the left and right arrow to focus specific inche ... Canon PowerShot A630 Digital Camera

My Canon digital rebel will not autofocus correctly. My camera has 7 points autofocus, but it will only autofocus on the far right point. All other points are not used. I have had the camera for 14 months and the problem just began. If I want to focus on anything in the left to center of the field of vision, I cannot do it. However, the lens focuses manually very well. Why won't my camera focus on other points than the far right one?


I had this problem awhile ago - you must have accidently adjusted the focal area - it is sooooo easy to do without realising it. Here is what I was told:**************************Most likely, you have changed the AF point, which onl ... Canon Rebel XT / EOS 350D Digital Camera

Focus points I am suppose to see 51 focus points when look in my viewer and I only see one now. How can I change it back. Secondly the dynamic AF area one shows one focus point. When shooting.


You cannot see all 51 AF points in the viewfinder. The purpose for this is not to block your view of the actual view. But the AF points are there. Just press the multi selector button to move the AF points around ... Nikon D300 Body Only Digital Camera

Focus malfunction I have been shooting with my D70 for a little over a year now with absolutely no problems. I shot with it last weekend with no problems. However, yesterady when I took my camera out to use it I realized that my autofocus single area option won't let me change from one focus area point to another. It is stuck on the center focus area. Even stranger when I tested the autofocus on the closest subject mode it is capable of locking on each of the five focus points. Does anybody know


THere is a little switch on the back of the camera, just under the area selection Dpad. Make sure it is not in the 'L' setting. This locks the selected autofocus area. ... Nikon D70 Digital Camera

Good Morning I went hiking in broad daylight this past weekend and the autofocus would not work. I have a Canon 40D with a TAmron 18-270. I used av, tv, p, m and auto and I could not autofocus the camera. All I could do is to switch to manual focus to get it to work. When the lens was set to AF all you could is hear is it racking back and forth tying to focus. VERY FRUSTRATING.. Any ideas of what it may be or a setting I might have set accidentally. Any help is appreciated. Bob


Did you set a strange auto-focus point? ... Canon EOS 40D Digital Camera

Hi there i have a auto focus problem. i used mt 50D for the first time on saturday, after about 100 shots Err99 appeared, i turned the camera off and took the battery out an the error message never occured again, however since then the camera will not auto focus correctly with my 17-40 IS lens. the lens has worked perfectly on my 20D for the past couple of years. When going from close focus to distant focus (and distant to close) there is no autofocus whatsoever. the focus points highlight i


The camera is having problems with your lens and this is why it goues into the error mode. Try first cleaning the interface contacts on the lens ( see enclosed pic ) . If this does not sort the problem out then the auto focus motor ( or related hardw ... Canon Digital Cameras

Auto focus My autofocus wont focus,  it used to when I first bought it, but now it seems to not want to focus.  The red flashing brackets in the eye piece dont focus and beep.  What do I  need to do to fix the problem?  I already checked to see if it needed cleaned but it seems spic and span.  Can anybody help me..PLEASE!


There should be a tiny little switch on the lens that shows 'AF' and 'MF'.  Make sure it is on 'AF' for auto-focus.  Also, is the lens rotating and locking fully? ... Nikon D50 Digital Camera

I recently went on a trip to Hawaii, wanting the best pictures possible, I cleaned my Rebel XT and when I got to Hawaii it would focus in and out but would not lock in focus so as to shot the picture. I also noticed the autofocus points do not light up and I can not manually focus either. Is this repairable?


Exactly what did you do when you cleaned it? ... Canon Rebel XT / EOS 350D Digital Camera

In my Canon 4ood Even after i pressed halfway and the autofocus point has blinked to indicate focusing is done but focusing is not happening and the shutter won't fire.With manual focus i'm able to take the picture without a problem.


If it is a dark scene and the camera cannot detected edges well the autofocus will either move around a lot or simply will not focus and thus wont expose. You will just have to manually focus or use the flash ... Canon EOS 400D / Rebel XTi Digital Camera

Nikon D300 - Auto focus point won't move. Autofocus doesn't work.


The lock that's around the 4-way button that moves the AF point will stop it from moving. The AF switch (says C,S,M) on the body below the lens release button gets knocked to manual and turns off the AF ... Nikon D300 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

I have a 1989 Video 8 handycam Product # CCD-F45 SONY it have corrupted interior mirco chips. I had it repaired locally for temporary use. It have stopped focusing so when I turn on the camera it has wavy lines and I can not use my valuable super 8 tapes I have taken over many years. Can you make any suggestions like an attachment Consquently I can not see my valuable tapes. Or is there a separate unit I can attach to my present camera.


... Digital Cameras

Unable to see anything through the eye piece or on the lcd. I can point to something and flash will go and it will sound like it took a picture but unable to see anything. Lens don't turn either for focusing. Just bought a new battery and charged fully but to no avail. Any suggestion would be greatly appreciated.


Hi!If it shows the menu, it could be CCD problem. This is a well known problem with the A1. You should contact your local Konica-Minolta (Sony) service center and see if they can change the CCD for free as they were factory fault, if I remember ... Konica Minolta DiMAGE A1 Digital Camera

I am using Canon 1000D dslr for more than 18months, it was working fine until last Sunday. I went outside and started taking few shots... it was not focusing properly (or should I say not at all!) and pictures are coming blurred. When I press the shutter button half, it should run the motor (in autofocus mode) and focus, but it is not doing anything (i.e. no red dots are coming)... what could be the problem? Thanks for any help.................


The autofocus motor could be be broken, or the lens may not be communicating correctly with the camera. One thing that can help if it's not communicating correctly is to clean the lens contacts. If you take the lens off, you should see some gold plat ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I am having trouble down loading my pictures, which was not a problem before. I now show on my desk top ACDsee 10-ACDsee7- ACD photo editor and ACD see 10 photo manager.' there was also a message that there were certain files that could be affected . It did take me almost a half hour to down load my pictures to night, which was rather frustrating to say the least. do I have to many ACD programes how do I correct the problem. I am almost at the point of trying to find another system.


Hello,\015\012Uninstall the ACD and then restart the system, after restarting reinstall the ACd back to the system. \015\012\015\012If your problem is only to copy or download pic from the camera to the PC. the computer detect autom ... Digital Cameras

Replace contact points in Nikkor autofocus ed 300mm F/2.8 Internal Focus lens


The contacts are part of the circuit board, (FPC, flexible printed circuit). You have to replace it, not really a DIY ... Digital Cameras

I.m a beginner of photography. I have a Pentax Kx and a brand new shiny DA Limited lens - 35mm 2.8 macro. I tried to take some macro shots but it couldn't even find the focus but when I use it as a normal lens, it's ok but I can't see much difference with a point and shoot. I need to develop a technically critical eye. I need an expert to help me with this lens on a regular basis. Anyone interested? And how do you charge?


You will need to start by understanding the need of the shutter speed and the aperture settings. The image you pictured must be taken in such a manner to get the impact on the memory.\015\012This will require a lot of logic by con ... Digital Cameras

When looking througth my view finder, I see an object at the bottom left side which appear to be a arrow pointing up at a slight angle. What could it be?


If it's the icon in the bottom left of this diagram:http://mansurovs.com/files/2010/01/Nikon-D5000-Viewfinder.jpgThen that means that there's no memory card in the camera. ... Nikon D5000 Digital Camera

I have a Nikon Coolpix S200 and yesterday during my nephews birthday I sat in on the kitchen table, left to play guitar hero, came back to see my camera completely covered in milk. I dont know how long it was laying in the spilled milk..and yes..there is use in crying over it. :( I grabbed the camera, dried it off, took the battery and memory card out. I got a wet towel and got all of the milk I could get out but it was in the battery compartment and everything. Put the battery back in and tried


You have dried milk in the lens area... u will have take chances on moving the lens around to get the dried milk from around it. If the lens is stuck out just lightly oush down on it and it should work. ... Nikon COOLPIX S200 Digital Camera

I have a nikkor 18-200 lens. the outermost ring screws into the lens glass ring with a few very tiny screws. the screws loosened and the cap fell off. nothing is broken (though auto focus no longer works with this off) but there is a solid plastic ring that covers the screw heads and i cannot see a way to access the screw heads to screw them back into the lens. it would be a simple procedure if i could access them. any ideas?


Ok.. If you can upload some images of what you are talking about then I may be able to help you with your problem. Please upload them to an image hosting site like imageshack,us and get me the DIRECT links to the individual images.Sai. ... Digital Cameras

How many focusing points are there provided in the camera to measure distance to a subject?


Normally the camera measures the distance to the subject using the 3 auto focus frames (left, center and right auto focus frames) in the viewfinder and selects the most appropriate point automatically. You can also select any one of the three points. ... Olympus EVOLT E-300 Digital Camera

Autofocus blury after i was zooming in with my camera i turned it off then when i turn it on the screen was blury. at first i thought it was just the lens but if i zoom in to a certain point the picture is fine. i've been reseting the camera and messing with manual focus but nothing seems to work.


If you would like to reduce the blurring, please check the following before taking a picture: \015\012\015\0121 Distance - When the distance between the camera and the subject is too close, the strength of the light can cause the p ... Samsung Digimax S630 Digital Camera

I have got a 4capilo camera bought in italy 2 years ago. las week while i was takeing pictures, a black spot came out in the middle of lcd. At the moment camera doesn't get focus . could you lel me know if there is an assistance point in Europe for ricoh 4 capilo, please?


... Ricoh Caplio R4 Digital Camera

Hello, my camera is 3 yrs old & its been fine. After taking a couple of shots the other day when I turn it on it makes a bleeps & seems to be trying to set the focus then the screen is just blank & the lights on red & I cant take a pic. It will let me go into the menu & to see previous pics. Ive tried restoring the factory settings. Dpo you think it could be repaired? Thanks


Hi berny_hayes, This problem can be solved by reinstalling the software which is inbuilt in the camera, possibly a new firmware version which could also have some additional bug fixes.The software can be installed on ... Olympus FE-280 Digital Camera

I have the same jittery picture on playback on a Sony DCR-TRV460. I see you've stated that the drum could be misaligned/damaged. I've used the cleaning head with no success. I need to keep this device around since I have so many tapes. What do you suggest? thanks


Yes sometimes when realigning the drum will not work. if the tapes were recorded with the drum out of alignment all tapes would have been recorded out of alignment. Delt with that situation where my player wouldnt play a customers tapes because his d ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1128 seconds