Having problems with your Canon PowerShot A640 Digital Camera ?

Greetings, I have a Canon Powershot A640 and my lens won't fully open when I turn the camera on. It only opens slightly and appears to be stuck. Is there an easy fix for this? Everything else is working. I can take pictures but obviously am only getting a slice of a photo where the lens is open. Thank you.

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
While blowing compressed air into the lens edges, one of the larger "inner" iris leaves fluttered out from its hiding place. This was while the lens was in the retracted position. I carefully "encouraged" the leaf with a small pointed tool into its fully closed position. At that point it clicked back into its normal position and it was clear that it had been pushed over and on top of the the smaller iris leaf, thus jamming it.
\015\012Problem solved. camera working great. Thank you.
Repair Help & Product Troubleshooting for Canon PowerShot A640 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera (s1075) is not taking any pictures or lettin me view my pictures due to the lens being frozen. it is stuck between open and close state and so will not open when i switch the camera on nor will it close. when switched on the camera shows the samsung screen but nothing else after that (both when i switch camera on and when i try to view my pictures)..is there anyway i can reset the camera or fix the problem manually (considering i cannot see any other screen besides the start up samsung

Sorry, it doesn't sound like a quick fix is going to work here. The lens sounds like it took a pretty good hit and may be misaligned now, which is keeping it from fully retracting. Your best bet is a service center at this point. ... Samsung S1070 Digital Camera

Greetings, I have a Canon Powershot A640 and my lens won't fully open when I turn the camera on. It only opens slightly and appears to be stuck. Is there an easy fix for this? Everything else is working. I can take pictures but obviously am only getting a slice of a photo where the lens is open. Thank you.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A640 Digital Camera

I was shooting pictures with my camera at a concert. I used the zoom feture to zoom in, and it caused a zoom error in the camera. I turned the camera off to reboot it, but the lens stayed out. When I tried to turn the camera back on, the camera came on, but the screen went black. I tried taking the battery out, and put it back in some time later (maybe 30 min.-1 hr.). This did not fix the problem, and I don't know what else to do. How do I fix this?

Hi it sounds like the lense has got knocked whilst the camera was one and the lense out, the damage may all ready be done but what you can try is when you switch it on get the lense and try pulling it out slightly and then when the camera is switched ... Digital Cameras

My camera is a new purple polaroid 1834, I got it for Christmas. I tried to take a picture the other day and it took one, and then shut down with the lens still out. It will not turn on, and everytime I press the power button a green light flashes and it beeps three times, but nothing else happens. I have tried replacing the batteries with brand new ones..still nothing. I've tried to batteries and everything.What is going on and what can I do to fix it? Is it fixable?

It is fixable but best thing to do is take it back to where you got it for a replacement. Or send it in to Polaroid the lens gears are stuck and the zoom motor sounds like it has gone out. If you have no sucess doing that then let me kno ... Digital Cameras

My HP CA340 10.0 megapixels with 3x optical zoom lens only shows a white screen when I turn it on. I can still take pictures with great quality as I could before, I just can't see what I'm doing. It was working fine yesterday, when I turned it on, it seemed fine, then the screen randomly turned white. I would like to know if there is a way to fix this before I actually have to send it in for some one else to repair.

My CA340 turns on and off all on its own...makes the camera almost useless... I sent a trouble report to HP support...tho I doubt I'll get any resolution. Should have stuck with Canon ... HP CA340 Digital Camera

Focus problem? well i got this camera about 2 years ago - now im studying for an art foundation degree so the projectat the moment requires me to take pictures real close.. like lens touching a paperclip on the table close - now everyone elses cameras seem to have no trouble catching perfect in-focus shots but mine is out of focus and fuzzy.. i dont understand - is there a setting to fix this? or do i need a better camera?

HiYes, there is a 'macro mode' setting which is what you need to use to take closeup photos.Put the mode dial on Auto in camera mode, and then press the 'macro' button, its the one with the little flower icon. The macro icon a ... Fuji FinePix S5000 Digital Camera


Hi,You can open the camera, but it was not advisable for you to take it off cause of the tiny parts inside that can result of much more damaged on the unit. It is better to take the unit to the service center for thorough check and repair ... Sony Cyber-shot DSC-S700 Digital Camera

Hello my name is ashley, i have a question about my nikon coolpix s3000 camera. i accidently dropped it and now the camera lens got messed up everything else is working fine but is just the lens that is not working. The lens stays out when i turn it off and it wont go in again. and when i want to take a picture it says lens error or sometimes it does take the picture but is all blurry. and i want to know if this is fixable.

Oh you silly boy,,,,,we have all done that in our time,,,what you have done is knock the lens gearing out of wack,,,well its busted for good,, as it may well be,,, but if you genteelly push on the lens when you turn off the carera it may help it to " ... Nikon Coolpix S3000 Digital Camera

I have a canon rebel xsi that is not taking pictures on auto focus. It will take pictures on manual focus, but they're blurry. I changed my lens to a bigger one to see if it was the lens or camera, and it's the camera. I had the same problem with the other lens. I've tried cleaning it & turning the lens focus ring but is still doing it. Anyone know how to fix this problem?

Try cleaning the lens contacts on the camera body and on the lens.This maybe the problem, it is not making contact with the lens zoom motor. ... Digital Cameras

The lens stays locked even when i turn the camera on.. the pictures i take are all black.. the lens retract but still closed.. the display is all black and the pictures are all black... other features are working i just can't take any pictures or videos.. how do i fix it?

... Pentax Optio S7 Digital Camera

My sony dsc-w1 got very wet, caught in a rainstorm and did not have the case. I have left it dry out for 4 days and it turns on, lcd works, can read memory stick and display old pictures on the lcd. But when I try to take a picture the lcd displays a black a screen and the picture that it takes is just a black box, flash illlumintor everything else seems to work, except the ability to take a picture, lens moves in and out, but picture is always black, any idea, is the ccd shot

Maybe the shutter got wet and sticky. You can try look into the lens then press shutter button to take picture. If you don’t see the movement inside the hole, the shutter doesn’t open, it will take black picture. ... Sony Cyber-Shot DSC-W1 Digital Camera

I am having a problem with my camera. It works in the sense that it turns on and takes pictures. However, the both the digital lcd display and normal finder display remain black, even after removing the lens cap. I let a friend borrow it a little while ago and I suspect they may have changed some settings, but I'm not sure what to look for to fix it. When it takes pictures, they come out looking very distorted and strange. But, it does take pictures, the flash goes off and a picture records. c

Please check out the Sony support website here: http://esupport.sony.com/US/perl/news-item.pl?mdl=DSCF717&news_id=161 ... Sony Cyber-Shot DSC-F717 Digital Camera

My camera lens get stuck and it won't take pictures or focus properly . It beeps when i try taking pictures then shuts off . The battery is all charged and everything else is fine . But it just won't take pictures !

Fixing a Lens Error on a Digital Camera \015\012This has to be THE most common failure mode for ... Digital Cameras

I used the Nikon D90 with Lens Kit 18-200 mm, and I also bought the new Lens call Nikkor 75-300mm. But when I connected the new one (Nikkor 75-300 mm) in my camera and took some pictures, after that I couldn't take more because it has F33 Error. I changed the Lens Kit that error disappeared. My problem is how to fix F33 error with Lens Nikkor 75-300mm in my camera. So, anyone know how to fix it help me please.

\012That's the Nikon error message for a lens with aperture ring set to something other than the minimum (i.e. highest number).\012\012\012The camera insists on controlling the aperture ring, and to do so, the ring must be set to the minimum ... Nikon D90 Digital Camera with 18-105mm lens

I dropped my camera while it was on and the lens was extended. And I dropped it right on the lens. And now when I turn the camra off, the lens does not go back inside the camera. Everything else is fine, I can see the picture perfectly. It's just the lens that won't go back inside. How can I fix this myself without buying a new camera, or having to pay someone to fix it?

If the cams making grinding or crunching noise the lens housing gears are broke. repair usually not very economical. about 80% the cost of cam when you bought it. ... Casio Exilim EX-Z57 Digital Camera

When i turn my camera (cannon powershot SD1100 IS) on the screen is black like it can not see through the lens. I can still see all of the menu options on the screen. If I try to take a picture it will still take a picture and the picture shows up just like it is supposed to. I can still review the pictures on the camera. Everything else seems to be working fine.

This could be a firmware problem.First, check your screen settings, should be in the setup menu. You may have the screen switched off, often used as a power save option.Secondly, if its still under warranty, go back to the ven ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you

This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Black Screen ive got a black screen when i take pictures; everything else on the camera works. the menu's pop up; the pictures ive taken show on review. but the actual view doesnt show anything and is completely black so whenever i take a picture its just all black. i just got this camera for christmas and it hasnt been dropped or exposed to liquid. it doesnt show a lens error number either; because i dont even think it knows it has one.. its just black though.

I have the exact problem. I came on slowly, some days it would work, some days it wouldnt. Finally i couldnt get it working at all. Sent it back to Kodak as it was still under warranty, the repair center claims it was "physical damage". They admit th ... Kodak Easyshare M753 Digital Camera

Water damage Hi, One of my kids knocked a drink over my camera and I have dried it out. The lens was not working, but seems to be now. But the picture is not good at all, and I can not see the picture I am about to take. It take photos OK just can not see what I'm taking. I keep getting told its probably cheaper to buy a new camera than to get my one fixed. Help please. Thanks Lisa

You can get a quote from digital camera or Samsung camera repairer then you can decide what to do.It maybe cheaper to get a new camera. ... Samsung WB700 Digital Camera

Hi, I have just bought the Fuji JX530. When I take a picture I get a split second clicking sound coming from the lens before the flash goes and the picture is taken. The picture is fine and the mechanism moves smoothly when turned on/off and zoomed in/out. Is this just the normal operating sound of the lens or something else ??

When you press the button, the camera performs many functions in a split second such as set the focus, set the aperture and shutter speed, calculate the flash power, etc. It will make sounds and if the pictures are fine, then all is well. ... Digital Cameras

Suspect the LS443 kodak "on" button was activated while in my pocket, causing the lens deployment that probably misaligned the lens and caused the current problem. The lens no longer deploys correctly. It will deploy with mechanical help, but functions improperly in some cases. Still takes pictures with coaxing. Any fixes that don't involve taking it apart?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare LS443 Digital Camera

Canon SD400 I dropped my SD400 and it will turn on, but the shutter will not retract. However, the screen comes on in color and then goes black and says no image. I can access the menu screen while on the picture taking mode. If I move to anything else the camera beeps three times and turns off. What should I do? Can it be fixed? Should I take it somewhere to get it fixed... and where can I take it?

Its very eas to fix this one.. \015\012\015\012just use a small screw driver and open it up.. \015\012\015\012its possible that the gears were just misaligned. \015\012\015\012got mine fixed..  ... Canon PowerShot SD400 / IXUS 50 Digital Camera

"lens error" when i turn the camera on to shoot photos, the display says "lens error".   It sounds as if the lens mechanism is trying to open, but it doesn't move.   Lights keep flashing.  I am able to view pictures I have already taken, but not able to take pictures. I have tried recharging the batteries and replacing them, but it did not fix the camera.

This happened to me last month. You can send it to Nikon for a free estimate on repairs. You only pay the shipping and they will ship it back to you if you decide not to fix it for free....only they don't tell you what is wrong with it. I suppose ... Nikon Coolpix 5400 Digital Camera

I have a casio EX S 500 it it turned on in error while in my pocket book the lens must have hit against something in my bag. Now when I turn on the camera to take a picture there is a buzzing sound the lens go in and out and there is no image on the screen, when you look through the lens, I am able to view pictures stored on the camera , can the problem be fixed? if yes will it be expensive?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Casio Exilim EX-S500 Digital Camera

I dropped my camera (Sony cyber shot DSC-W80) on the lens and the smaller part on the lens became slanted. I pulled the lens to become straight again and now when I turn it on its keeps retracting and extracting telling me to turn it off and on again. It doesnt let me take picture but I can view my pictures. How do I fix this?

\012\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure m ... Sony Cyber-shot DSC-W80 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4587 seconds