Having problems with your Canon PowerShot A70 Digital Camera ?

Error E18, wht does this man when switching ON the camera


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Canon PowerShot A70 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Error E18, wht does this man when switching ON the camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot A70 Digital Camera

E18 error I have a Canon Ixus II which is four years old. Today I switched it on, took a couple of pictures which appeared blurred on the screen. Deleted these pictures. Camera lens stayed out. Switched camera on and E18 showed on bottom left of screen.


The following outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/2007/ ... Canon PowerShot SD110 / IXUS IIs Digital Camera

I have a canon poershot A85 with error E18. It was working fine until I switched off for a few minutes. When it was switched back on, the lens stopped halfway and the camera "locked up". On putting new batteries in, I have got the lens fully out, but it is now stuck there and I'm still getting the E18. Any suggestions?


I would suggest you go and buy a new camera as they are so hard to get repaired and if you dont know how to work on them it makes it even harder.you will get a lot of odd advice on here as you are alreay figuring out but your best solution is to go g ... Digital Cameras

E18 error camera switches off - Canon PowerShot A70 Digital Camera


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A70 Digital Camera

Error in on/off switch,lcd shown E18 - Canon IXY Digital 700 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon IXY Digital 700 Digital Camera

I am getting error E18 while switching the camera on. Mine is Canon Power Shot S21S.


HI! WELL, AFTER MUCH DIGGING I HAVE DISCOVERED THAT THIS IS A VERY COMMON ERROR AND HAS ALL SORTS OF CAUSES AND POSSIBLE CURES. THE BEST I WAS ABLE TO DETERMINE IS IT IS A LENS ERROR. BY THIS THEY IMPLY THAT THE LENS EITHER GOT BUMPED, STUCK, SOME DI ... Canon Digital Cameras

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

Lens error when ever i want to switch on my camera it says on the screen "lens error" in the middle and sometimes if i am lucky it will evetually work but afterwards when i want to switch it off and put the camera on again it comes up with "lens error" PLEASE PLEASE help me solve this problem!!! :)


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Vivitar ViviCam 4345 Digital Camera

Lens error CoolPix L11. I switch on the camera The lens comes out. A picture is shown for about 1 second. Then the message Lens Error is displayed. The lens is retracted. After 15 seconds or so the camera switches itself off. The camera was bought in USA as a gift for a friend in Sri Lanka. Not so easy to get a local repair - if this is at all possible anyway. What is your advice? Thanks James


Try the procedures in this tip. ... Nikon Coolpix 5700 Digital Camera

Lens error When the camera is switched on the lens does not open out and the lens cover does not open. The camera then displays a "lens error" message and suggests that the camera be restarted ten switches off. This happens repeatedly.


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera

Lens error my canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera?? i'm currently overseas and although my camera is within warranty, i cant possibly send my camera back to the original country for repair. is there any DIY method?? i'm an amateur at cameras so i do not wish to try any method that may further make the problem worse. thank you for your h


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon IXUS V2 Digital Camera

Camera gives E18 error!!!


\012Hello there,\012\012The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a f ... Canon PowerShot A410 Digital Camera

Power problem I was charging camera using 4.5 DC volt socket on Camera, next I switch on camera so Lens head came out, accidentally power pin came off from camera and lens will not go back. Now nothing happening to camera when power cord connected or with battery, camera will not switch on at all including power lite does not come on with power cord connected. Look like it may have blown fuse in camera or something else serious. Any solution which I can try? I'm a very handy man with good too


I sounds like coincidently something in the camera failed. I doubt very much that simply pulling the power from the camera would cause damage. \015\012\015\012In anycase, if you were to open the camera, you would see that all the circuit ... Olympus FE-220 Digital Camera

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked. i have switched the lock switch on the card, and it doesn't do anything, i have also tried formatting my card.


1 Turn the Canon Powershot A560 over so the bottom is facing up. 2 Locate the door on the bottom of the camera. The door is labeled "CARD/BATT. OPEN." 3 Place your thumb on the sl ... Canon PowerShot SD750 / IXUS 75 Digital Camera

E18 error I just had my camera serviced for a bad CCD imager. When I turned it on the first time, after coming back from factory repair, I get an E18 error. Looks like the lense won't come out??? What do I do to use my camera in good working order again?


Greetings sandrak2,\015\012\015\012As frustrating as it might be, I would suggest directly returning to whatever repair shop you had it serviced by and demanding they redo the fix. It is not acceptable for a unit to be sent in for servic ... Canon PowerShot A70 Digital Camera

I switch off my camera Canon PS SX 200is as normal. On switching it on again it came up with an error message-: (lens error, restart camera) Can you let me no what the problem is and weather it will be costly to repair..... sounds as if the moter to open the lens is not working,


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot SX 200 IS Digital Camera

I have a problem with my Casio Exilm ZX-Z75 Digital camera. When I switch the camera on the lens moves round and an error message displays saying lens error, then it switches off again, please help.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

E18 Error Let my husband use my camera he said he did not drop it I can see the pictures taken but when I try to take more I get E18 on the screen Power shot a400 but get error message then shuts down. Ive had this camera a few yrs I love it.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A400 Digital Camera

My panasonic lumix fz28 gives me an error saying "Error in O.I.S." and "please switch off and switch on the camera". It still takes pictures and all the features are fully functional, after the first picture the following messages mentioned above are displayed. Can you please help me with the issue? The camera is a few months old and has never been manhandled or dropped,it seems to have developed a problem overnight.


This error is for the optical image stabilisation. \015\012\015\012Generally the camera should be ok after your turn it on and off again. The error you are getting is because either the OIS has malfunctioned or is stuck.I thi ... Panasonic Lumix DMC-FZ28 Digital Camera

Error message: Please turn camera off and then on again when camera is switched on. Battery is full ... it looks like everything is working well when camera is switched on. When switched off ... same message comes back up again .... Is there a reset function ??? Kind regards Matt


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Panasonic Lumix DMC-TZ1 Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

When I turn on my Nikon D40 with the 18-55 mm lens set to autofocus I get an error message "Error. Turn Camera off and then on again." If I turn the lens switch to manual, I do not get the error. If I attache my 70-300 mm lens, I get the error regardless of the lens focus switch psition. I have just upgraded the firmware with no improvement.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

I have got Yashica Ez8032 Digital Camera and it suddenly showing Lense Error 21 & 16. It is not getting switched on and no sooner I switch it on it displays the Lens Error and gets switched off. I can't take any pic from it. What can I do?


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3605 seconds