Having problems with your Canon PowerShot A710 IS Digital Camera ?
Canon PowerShot A710 IS ~ Will Not Stay Powered On
\015 The subject line pretty much says it all. \015\012\015\012I have a Canon PowerShot AS710 IS that has been a pretty camera up to now. The camera still works if I'm real careful while attempting to take a picture. The camera seems a little harder to get it powered on. Once the camera is powered on, any slight movement will cause the camera to power off. If I have the camera in positiion to shoot when I power it on, I can take a picture if I keep it still. I can set the camera on a solid surface and it will stay powered on until it automatically powers itself off. \015\012\015\012I really need to get this camera fixed as I use it all the time in my business. Please advise if there is a master reset or anything I can try to correct this problem. Thanks\015
The situation I've described above was with the Canon power adapter, I was not using any type of batteries at all. The camera simply shuts down immediately once any kind of movement is detected. It's a little hard to power on but the camera will work once powered if kept completely still otherwise it will power off with any slight movement. I am just wondering if the camera image stabilization or some type of "tilt" factor can be reset.
Are you still using alkaline batteries? If so, alkaline batteries just don't have the power for more than a few pics in a digital camera. Some may have reached their shelf life, and though brand new may even have problems just powering startup of the camera. Digital cameras for the most part should only be used with rechargeable NiMH batteries. Retailers sell these for around $7 for a package of four (about $15-19 for the batteries with charger). Keep in mind they'll save you big bucks in the long run over alkalines, AND they'll last for at least 100 pictures per charge (and probably many many more). You'll be very pleased with their performance, and may slap yourself for not buying them sooner. When at the store, look on the package for a power rating of at least 2500 mah.
Repair Help & Product Troubleshooting for Canon PowerShot A710 IS Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Canon PowerShot A710 IS ~ Will Not Stay Powered On
The situation I've described above was with the Canon power adapter, I was not using any type of batteries at all. The camera simply shuts down immediately once any kind of movement is detected. It's a little hard to power on but the camera will ... Canon PowerShot A710 IS Digital Camera
Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.
These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras
Canon powershot S5 IS power light stays red even with new batteries
... Canon PowerShot S5 IS Digital Camera
Canon PowerShot SX20 IS won't stay on once you push power button
... Canon PowerShot SX20 IS Digital Camera
My canon powershot A640 powers up but but the screen looks like a cracked windshield....although one cannot feel a crack when touching it. The screen stays white except right where the 'crack'
... Canon PowerShot A640 Digital Camera
Canon Powershot SX 10 IS It won't power up. The blue light on upper left of the back of the camera stays on. Any advice appreciated. Thank you.
I suspect that the batteries are not powerful enough to power it up ...(if you know that nothing happen with it ) just remove the batteries and try to use some real good AA batteries....or if you use rechargeable ones...just try regular ones just to ... Canon Digital Cameras
My Canon Powershot S3is won't stay on. I thought it was a battery problem, so I got brand new batteries, but after two or three pictures it shuts off and won't come back on. I have gotten SO many different kinds of batteries thinking it was a power thing, but this is crazy. Please help.
You may have a loose connection in the battery terminals, or they may be dirty. But it sounds like you will need to refer this to Canon ... Canon PowerShot S3 IS Digital Camera
Wrong power adapter plugged in - Canon PowerShot A710 IS Digital Camera
Hi Cliff,This can be the cause of a catastrophic failure for the camera (or any other electronic device that has been mismatched to a higher voltage or different current type power supply). The chances of recovering from this are dependent u ... Canon PowerShot A710 IS Digital Camera
HI, I have a Canon Powershot Sd 790 IS and it totally quit working on me so I took it all apart and then put it back together and now it powers on okay, and the lense opens and extends, but the image is blurry. I'm thinking there is a reset somewhere so that the camera knows when it is focused and then stays that way. Am I right or is there another problem? If I'm right, what do I have to do to reset it? Thanks Marty
This is probably a problem with the focusing ring. The focusing ring is inside the lens assembly, and there is a ribbon connector going to the main board. There's a chance that the connector is slightly misaligned, or loose. Another problem co ... Digital Cameras
Turn the power off and on again - Canon PowerShot A710 IS Digital Camera
That means the lens is stuck somewhere. Needs to replace the lens assembly. ... Canon PowerShot A710 IS Digital Camera
Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff Canon S1IS have problem with dark screen... I have a brand new Canon PowerShot A560 Digital Camera. I put in brand new batteries. On after shooting n
Your camera has the know issue of Stuck shutter, whichhappens after some time (weeks or months) thata camera is notused.\015\012\015\012Unfortunately the repair of it requires a complete disassembly of the camera, including the lens, fix ... Canon PowerShot A560 Digital Camera
NO POWER CANON POWERSHOT A300IS - Canon PowerShot A3000 IS Digital Camera
Clean the battery and camera contacts with a pencil eraser. Make sure the batteries have a full charge. ... Canon PowerShot A3000 IS Digital Camera
Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
Canon a710 is advanced guide - Canon PowerShot A710 IS Digital Camera
Http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=Dow ... Canon PowerShot A710 IS Digital Camera
Describe hi, i have a canon powershot a520 that was left in someone's purse when she gave it back to me the lens is now sticking half way out and when i push the power button it blinks on for a split second immediately shuts off. is there a simple fix for this or is it a major problem Canon PowerShot A520 Digital Camera Problem
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A520 Digital Camera
Canon a80 dear hi, hope u all r well. please help me to solve the problem for the canon powershot a80 which suddenly got dead.when i press the power switch it takes around 150 ma of current till i keep power button pressed.no light comes on.After releasing thepower button the current goes down to zero. please help me.i m an electronic technician.this is my personal camera.thanks my email [email protected]
Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A80 Digital Camera
Memory card is stuck in my canon powershot. - Canon PowerShot A710 IS Digital Camera
That's unusual. Just making sure that you know that it's spring loaded, and to release the catch you actually have to push in on the card. ... Canon PowerShot A710 IS Digital Camera
My canon powershot g12 will not stay on longer than 10 seconds in video mode. How do i fix this problem?
... Canon Powershot G12 10 Megapixel Digital Camera w/ HD Video [4342B001]
MI CANON POWER SHOP a60 DOES NOT POWER - Canon PowerShot A60 Digital Camera
I GAVE A HARD BLOW HIM AND I WORK!!!!!CERTAIN ... Canon PowerShot A60 Digital Camera
Canon powershot g2 power up issue - Canon PowerShot G2 Digital Camera
... Canon PowerShot G2 Digital Camera
Canon powershot power will not turn on. - Canon PowerShot SD600 Digital Camera
... Canon PowerShot SD600 Digital Camera
How to use powershot a710 is as a webcam - Canon PowerShot A710 IS Digital Camera
Please, read this wiki, http://chdk.wikia.com/wiki/FAQ. There may be the answer. ... Canon PowerShot A710 IS Digital Camera
Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt
... Canon Digital Cameras
I have a canon s21s power shot, my problem is that i just replaced the 4 rechargeable battries with new ones,now my camera will not stay on, i turn the power on and it clicks the light comes on but as soon as i remove my hand it powers down and if i try to switch to the other side it does the same thing
It sounds like the batteries are not charged. New rechargeable batteries usually are not. Try alkaline batteries just to test the camera. ... Canon PowerShot S2 IS Digital Camera
Raw images on a Canon Powershot A710 is
There is a "hack" to enable the RAW mode on a A710... Google is your friend :) ... Canon PowerShot A710 IS Digital Camera