Having problems with your Canon PowerShot A720 IS Digital Camera ?

Funtion pad on cannon powershot a720 does not work. how can i reset the camera in hopes of getting it to work?


Answers :

It's the last option at the bottom of the Setup Menu. Check out this link... It's about half way down the page, below the Record Menu functions.

(http://www.digitalcamerainfo.com/content/Canon-PowerShot-A720-IS-Digital-Camera-Review-15944/Design--Layout.htm)

Best Wishes...

-AD
Repair Help & Product Troubleshooting for Canon PowerShot A720 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Funtion pad on cannon powershot a720 does not work. how can i reset the camera in hopes of getting it to work?


It's the last option at the bottom of the Setup Menu. Check out this link... It's about half way down the page, below the Record Menu functions.( ... Canon PowerShot A720 IS Digital Camera

Hi, I sure hope you guys can help me out! I am trying to download some pics from my computer onto the 4GB memory card in my Canon Powershot A460, but the camera won't let me. The reason I'm doing this in the first place is because the SD port on my computer suddenly stopped working, so I thought another way to get the pics onto my Scandisk was through plugging my camera into the computer and doing it that way. However it is now telling me that my camera may not support this, is there anything I


Sorry, no. The camera will let you read the card to transfer pictures to a computer, but it will not let you write to the card to transfer pictures the other way around.\012\012\012You can buy a card reader that plugs into the USB slot on ... Canon PowerShot A460 Digital Camera

Re Canon Powershot A710 IS The following are not working: zoom, menu, picture selection scroll, picture download button BUT it is still possible to take pictures and download by using PC software. Can the camera be reset to get it working again? D Barrie


HelloOK, firstly i will start by mentioning that this is a reoccurring fault with this specific unit.The problem is most probably that either the plastic pins of the camera buttons that push on the circuit board has been shift ... Canon PowerShot A710 IS Digital Camera

My Cannon Powershot A1000 IS does not review pictures, zoom in, or register that I try to change the menu settings (or the flash, macro, ISO, or display setttings). My husband was taking video near the ocean and some of the water got onto the camera. There was only a little on the surface - just enough to warrant needing to be dried off with a towel. What can I do to get the camera working properly again?


ISO buttons or zoom on power shot A1000 IS image stabilizer camera just stop working Help!!! ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

My canon powershot a95 display screen does not show an image when I am trying to take a picture. The image that is displayed is black with white lines and varies in the amount of black and white. No matter what setting I turn to, I can not get the image to appear. It had been working fine till a couple of days ago. It has not been dropped. I get the same result when trying to view a picture of a card. Is there any way to reset the camera?


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

I have a Cannon Powershot SD 450 Digital Elph camera that started giving me problems when you turn it on it starts up and then beeps and sutsdown giving me a e18 error at this point the thing is not worth a sh_T and I am looking for help with software that might reset it or anything that could work.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon Digital Cameras

Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss


Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras

We got our Cannon Powershot s70 wet and now the battery appears to be dead (charger flashs red and green but no charge appears to be happening. Use of a new battery still doesn't poer the camera. Thanks Tony MoreWe got our Cannon Powershot s70 wet and now the battery appears to be dead (charger flashs red and green but no charge appears to be happening. Use of a new battery still doesn't poer the camera. Thanks Tony Comments:Mar 23, 2010 - My concern is that the camera getting wet event occurr


Hi,\015\012\015\012At this point it is likely that serious damage has occurred to the circuitry of the camera which will have been shorted by the water ingress. Water is also corrosive in nature (particularly salt water) and wreaks havoc ... Canon PowerShot S70 Digital Camera

Error 99 This is the second day with the camera and i got a Error 99, i read up on some websites that said to take out battery for a few mins and that resets the error, well it worked. Before I reset it I did take off the lens and put it back on. Now the error seems to be gone. I took the camera out with me to work and it was quite cold in the car so i am hoping that it was the moisture/dew that caused this error. Anyone else have any input on this?


Some case this type of error is in connection of incompatible lenses. I had same problem with a Sigma DL 70-300/4-5.6. It's working only in Av position (Aperture priority) and every time I need to set the minimum aperture and it's work. If you forget ... Canon EOS-20D Digital Camera with 17-85mm Lens

I have a Cannon camera Powershot A550 The camera works o.k. with the memory card furnished,but when I try a 2gb memory card the camera says "memory card error"The card is formated but the camera doesn'like it.Ive tried 3 new cards but it still wont work. Thank you for your help Larry


If the new memory card is an SD card, you should be able to use up to 2GB. MMC can support up to 1GB. You can check this link. \015\012 ... Canon Digital Cameras

GE C1033 I have a memory card that when I put in the camera, it gives me a "card error". I can put this in another camera and will work just fine. Is there a way to reset the camera? The internal memory works just fine and I have bought a new memory card ans till get the same error.


Most cameras need the card to be formatted in the camera to get it to work with the camera's operating system. This will erase the card so download any pics you want to save first. ... GE C1033 Digital Camera

Hi there. I have an Olympus E-510 that is about 3 years old. It's been working fabulous until just until recently. I connected the camera to my computer and downloaded some photos just like I always do with no problems - disconnecting it as I always do (USB). The next time I went to use the camera, the USB storage screen shows up and I can't get it to go back to the original setting to take photos. I can still download any images from the camera but can't get off that menu. I've tried the reset


I'm not really sure what's going on, but it could also be a hardware problem, or maybe ribbon connector inside the camera from the usb port to the main board, or maybe a bent pin in the usb connector.\015\012Check it out carefully, and remove t ... Olympus EVOLT E-510 Body Only Digital Camera

For fully charged NI Mi batteries 2700mA, when I turn on my camera I may or may not get the red low battery sign, I may or may not get over 15 shots, and I end up to the "instruction" that my batteries are low and must change them. Turning on and off the camera, everything is OK, I can take shots, and the problem returns. I have the PowerShot A570 IS Ai AF Cannon digital camera. I have a new charger that when the LED sign is on Green I know that the batteries are full. Is the problem on the cam


How much time between shots is it? ususally there is a 3 minute none use shut down timer or warning light. so if it is more than 3 minutes from the time you take one picture to the next picture then that might be your problem. also these new digital ... Canon PowerShot A570 IS Digital Camera

My Canon Powershot G3 will not respond. When I turn it on a get a rapidly flashing green light on the back, and when I try to connect I get the message on the computer that there is no supporting software. To try to reinstall the software on the camera I uninstalled the Canon software, reinstalled it, and then connected the camera, hoping that the software would reinstall whatever was corrupted or missing. Do you know what is going on? Paul Luyben


... Canon Digital Cameras

I'm no longer able to download images from my IXUS 75 camera to the computer. While trying I'm getting the message "cannot detect camera. Check the connection and try again." I have tried uninstalling the Cannon software and installed an updated version as suggested by Cannon, but without success. Everything worked find up until this summer. My computer is applying Windows Vista.


Even without the software, you can still download your image files from the camera to the computer. While the camera is plugged into the computer thru the usb cable, turn on your camera from there. Right click on the Windows Start button and choose ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I have a cannon rebel eos. It was working fine until last sunday, I now get an error msg 2 which means cant read memory card, I have tried everything, new card, batteries, I dont know what else to do. Can anyone help? Im in desperate need of my camera, and where I live there is one person who works on cameras! Any advice would be so appreicated. thanks


HelloOK, the specific error you are getting:\015\012\015\012 Err 02: CF DRIVER \015\012 \015\012 \015\012 DESCRIPTION: This error occurs when image \015\012data cannot be written ... Canon Digital Cameras

My camera is stuck in setup mode. I have tried to reset using reset button, removed aa batteries overnight, and still stuck in setup. My apple computer still recognizes the camera using usb, but cannot get it to regular modes (the round selector on top does not seem to work when changing settings)


Https://eservice.sony.com/webrma/web/index.do?SR=nav:service_support: ... Sony Cyber-Shot DSC-W1 Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera

I turned my Cannon Rebel XT digital camera on and I get an error message as such ERR CF [ 0] what do I need to do in order to get my camera to work?


Hi,\015\012You get this error message due to defective memory card in camera . You need to replace the memory card in order to solve this problem .\015\012Before replacing do complete formatting of the memory card (such as FAT,FAT 32 etc ... Canon Rebel XT / EOS 350D Digital Camera

I get message, memory card needs formatting, followed instructions and the same message comes up again. It worked fine until I used my camera for a video and it has not worked since, except when I take to card out and use internal memory, Camera CX7430 - card Emtec SD Card - hope you can help. Lori


I have 5 of those cameras and I've never been able to use a memory card bigger than 2 GB. The 4 GB gave me the same message so I don't even try anymore. ... Kodak EasyShare CX7430 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Camera was working fine. replaced batteries, went thru the set up procedure everything fine. checked the camera a few days later, no pictures even though you could see fresh tracks in the snow in front of the camera. brought the camera in to see what was wrong. unable to get the set up screen or tones. is there some type of reset?????


... Bushnell 119415 Digital Camera

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.


... Canon PowerShot SX110 IS Digital Camera

Hello, I have a digital camera CANON PowerShot SD790 IS IXUS 9015. The lens started to come out as I turned the camera on and nothing was blocking the camera when doing so. But, suddenly it stopped and the lens is stuck and I can't get the camera to work. Please help. Thank you!!! Kristina.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

I have a canon camera powershot SD1200 is digital elph 10 Mega Pixels . Lately when I take pictures the camera works as usual but when I want to review them or to download them to my pc the picture is not displayed on camera lcd (neither on my pc) and I get instead a picture of ? with label "unidentified Image" below it... Knowing that the memory card is not full (i have a 4GB elite pro Kingston memory card) and I currently have only 130 pics in my camera !!! Also sometimes when I try to play a


I have heard of this happening if the card was not formatted on your camera. Be sure you retrieve what you can from the card, then format it in your camera. It may solve your problem. The higher capacity SD mem chips (>2GB) sometimes don't disp ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6566 seconds