Having problems with your Canon PowerShot A75 Digital Camera ?

No image found

\015 When taking a picture & set it on the view mode,there's no image found.\015

Answers :

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
\015\012
\015\012http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
\015\012
\015\012for those in the US:
\015\012http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
\015\012
\015\012
\015\012Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
\015\012
\015\012For the Philippines, here's the advisory, print it out:
\015\012http://support-asia.canon-asia.com/index.jsp?fuseaction=support&prod_type=image-phenomena_notice
\015\012
\015\012And here's the Canon Philippines contact info. Recommend contacting the Makati center:
\015\012http://support-asia.canon-asia.com/index.jsp?fuseaction=support&prod_type=sales_service_phi
\015\012
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HI All of a sudden, there is lets say no more image on the display or the image is purple and full of weird lines. No image at all and when I click to take a picture everything works out well: the flash the mechanism but no picture appears as taken Thanks. My fine pix has a similar problem . In movie mode it is fine but when I take snaps all images are found to have bright white horizontal lines , looks like a light sensor problem , no solution found so far . :(


BUT NOW U HAVE FOUND SOLUTIONCCD FAILURE !but u will get it repaired Free of Charge as Fuji has taken notice as all manufac and i got my S5000 repaired Free from Fuji just call them tell them about BAD CCD it is a known manufa ... Fuji FinePix S5000 Digital Camera

Horizontal Lines I found in my Canon PowerShot S 500, in the screen, the image appearing having horizontal lines in it, in the replay after imaging and replay mode, and after it is on the computer, the lines appear in the picture clearly pixelating the picture horizontaly, while in video mode, no lines appear at all while videoing and viewing the video. in the viewing mode normally before taking the picture, i found that there is very light lines cannot be seen easily, but became clear when i tr


Even am facing the same problem is it due to the problem mentioned in this site?\015\012\015\012http://www.canon-asia.com/index.jsp?fuseaction=image-phenomena_notice ... Canon PowerShot S500 IXUS 500 Digital Camera

I first experienced a problem with my Canon S2Is camera when it was only taking pictures of blank images. I found a "fix" recommendation which seems to have gotten rid of the black image problem. However, now when I take pictures the images seem to have horizonal lines through them if I don't use the flash. Also, if I am taking a picture outside or in a lot of light, the image ends up being extremely light. Have any suggestions?


Think you need to do the fix more. Believe your shutter was previously stuck in the closed position. Now it sounds like it is stuck in the open position. Again keep trying the fix to loosen it up. Just to confirm, the "fix" you're talking about i ... Canon PowerShot S2 IS Digital Camera

TZ5 with 4Gig SD card. Filled card was given 'DElete All' command. The DCIM folder,containing 101 PANA and 102 PANA was emptied, but another folder 'Arlene & Bo Collection' remained, (unbeknown to me at the time). Several new images were added, then viewed.On next attempted viewing I noted that the knob was not opposite iA, when I selected iA I found no new DCIM images were accessible. I added a further image, which was succcessfully viewed. On my computer the new image was visible along with th


If you got data loss , then the SD card may be damaged, better not to use this one to store important data or pictures.SD cards are not expensive, buy a new one, format the old one, and keep the old one as spare. ... Digital Cameras

My camera is not work properly. when i open camera, no image shown.just displayed no image. but there were found some image. so what i will do


... BenQ DC E1000 Digital Camera

On my camera (Sony Cybershot DSC-W330), I clicked "Play" to view the images. It said "file error," although I had been viewing the pictures ALL DAY and they suddenly disappeared. Now it says "no images" and they cannot be found anywhere. When I plug it into my computer, some show up in jpg format, but can't display a preview or the image or anything! Are they gone for good?? :(


... Sony Cyber-Shot DSC-S40 Digital Camera

Camera says "no images found" but the images were just looked at earlier in the day. Any way to retrieve the images???


Use a card reader to download them to your computer. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?


Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

I was having trouble installing the drivers for my creative notebook camera(its a VF0250) and i downloaded the latest versions straight from the website. when i would plug it in it said "device not recognized" and would search for the drivers but never found them. until i manually had to find them. i went on device manager->right clicked properties then went to the driver tab and clicked update driver-> clicked imaging devices and found the creative webcam driver there. now atleast the webcam re


You probably installed the wrong driver by doing that ..and what you need to do is go to the support site ..and download and install the correct one ...the camera need to be identified and to say that the device is installed and ready to use in order ... Digital Cameras

I am not sure whether this feedback will work for me or not but still I must say that I am totally dissatisfy with canon DSLR camera and it?s service that is available in Kolkata. 16 months ago I bought a canon EOS 1000D (SN. 730203665) camera. Two months ago I found a problem that, the images I took, a black spot was coming on the top of all the images. I went to the local canon service center in Kolkata they advised that the sensor needs to be cleaned and I handover the camera to them for c


Believe it or not, most cameras come with "factory dust" just waiting to float onto your sensor. Cleaning it is quite easy with the right tools. Google the words..."cleaning a DSLR sensor" and you will find numerous sites that will explain the proced ... Canon Digital Cameras

Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was


... Panasonic Lumix DMC-LZ2 Digital Camera

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A


Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

I have a Caonon 40D. I thought I was having a lens problem at first. However after using 2 other lenses I have found out it is my Camera. No matter how clear and crisp the image is in the view finder. After the photo is taken and loaded into PS4. The image is blurry and unsharp. I have reset all camera settings to factory with Canon. And I am still getting the same results. Any help would be appreciated. Thank you in advance.


It is probably due to dust on the sensor, or sensor alignment not properly done. In both cases you have to take the camera to a Canon dealer for servicing. ... Canon EOS 40D Digital Camera

In a drunken haze on Friday night, I was looking for my camera for hours, to record the crazy antics of the eve. When I found it later, much to my dismay, the screen had several cracks on it. This is the result of it being found in my back pocket!! I have been able to get all the photos off the memory stick, and the camera still operates perfectly, except there is no image visible on the screen. When switched on there are no unusual whirring noises that would indicate internal mechanical problem


Definitely repair... olympusamerica.com/repair ... Olympus Digital Cameras

Ixus 75 i have a date on my camera when i shoot the images. When I get developed images there is no date stamp on it. I found a possibility in menu "date stamp" but it is impossible to put it on. thank you in advance


Your camera will datestamp your photos only in "postcard" mode.However, the date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print thi ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Process Cropping For the very first time I placed an order for prints with Snapfish. Most of my images had been edited by me more or less with Photoshop. There is a place at the end of the ordering process where they let you know how some images will be cropped (on the top and bottom). I didn't want mine cropped so I choose to have the photos printed to a slightly smaller size where the cropping would not be necessary. Well, I received my prints and found that some were cropped anyway, and, of


Most digital cameras have an aspect ratio of 4x3.\015\01235mm cameras have an aspect ratio of 3x2.\015\012\015\0126x4 photopaper also has an aspect ratio of 3x2.\015\012Therefore you don't get cropping when printing from 35mm film.\015\012\015\012To ... Creative Labs PC-Cam 300 Digital Camera

Card protected Card says protected and has images that wont erase and wont download! I NEED these pictures on the card! There is no lock switch on the side of the compact falash card. I found protect under the menue on the camera but can not figure out how to unprotect the images. any suggestions?


Use a separate card reader to download your pics. Then, you can format the card in the camera to get it to work properly. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I recently bought a Ricoh Caplio RR770 digital camera. I have found that many of my images have a grey bar covering the bottom 20% of the pictures. Not all of them turned out this way, but a fair ammount which pretty much makes the pic useless when trying to post. This is very annoying and I have no idea how this happens or how to remedy it. I know the pics themselves are fine because after I took them, I looked at them and there was nothing wrong. Only when I upload the image somewhere does thi


Hi..the best solution to this problem is by reset.\015\012Take out the photos as backups and reset the\015\012camera once.By reseting it you will not find any\015\012type of problem.It will be alright.But if u still \015\012co ... Digital Cameras

I just received a nikon d90 as a christmas gift for me..When i took a picture i cannot view the image and it says Error on the screen and no images found from the the card.. looking forward for your immediate respond... thanks


Have you formatted the memory card? This is required for a new card or a card used from another camera before use. It is also good practice to format the card every time you use it. This is done from the setup menu. ... Nikon D90 Digital Camera with 18-105mm lens

No image found


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A75 Digital Camera

Canon SD750 The camera tells me there are "No Images". Yet, it also tells me that "The Memory Card" is full. I shot video just to see it, brand new camera using the 32mb card, and now, nothing. Can't shoot stills, anything, because it's full in its mind. I found the erase option. It's grayed out, meaning it's not at option because there's nothing to erase according to the camera. Any ideas. Is the stock card **** and this is Canon's way to upgrade?


I had the same problem. I had to get a new card. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I took a series of photos on my EOS 10D and checked them before shutting the camera down. A few minutes later when I turned the camera on I found the images had disappeared. I have retrieved them using a recovery program but I'd really like to know what I am doing to have this happen.


Hi,Think of the camera as a smaller brother of your PC. When you checked the series of photos, you were actually accessing the memory storage. The built-in processor of the camera was still reading them, sorting them, cataloging then and ... Canon Digital Cameras

I tried to download the FinePix Z3 software to my new computer 2 times and the same errror message occurs. String X_O_Warning was not found in string table. Then X_OS_WARNING. Then when I tried to open the software and connect my camera it won't work. The camera image doesn't even show on the camera back and the computer shows an error message. What do I need to do?


Your new computer is Windows 7?\015\012You need to download the latest version 5,5 of FinepixViewer to run on Win7.\015\012You can get it here:\015\012 ... Fuji Digital Cameras

No images found on the screen. Total black out


Make sure you are not in day mode that will cause the camera to make you use the tiny view screen. ... Sony Digital Cameras

Date Stamp Hello! I'd like for the the time and date to show on the images taken with my Canon Rebel XTi....I looked through 2 manuals and found nothing.  Thank you.


I do not believe that this feature is available. The date and time are stored in the EXIF information of all photos taken. This information can be viewed with most image viewers in a separate window. ... Canon Rebel XT / EOS 350D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0514 seconds