Having problems with your Canon PowerShot A75 Digital Camera ?

Canon A75 no images on LCD when shooting

\015 I recently had it fixed 6 months ago. Presently I can only see images on LCD when shooting in stitch assist mode. I am able to see the images taken on TV monitor. I am unable to see playbacks on LCD. I am able to shoot images but can't playback. Thanks.\015

Answers :

Possibly the same problem I just had with my A75 (and shared with another post here).

Below\015\012 the LCD are two buttons (versus four on the A70). The button\015\012 on the left is the Print/Share button, which is new to the A75,\015\012 while the display button (DISP.) toggles the LCD and what's shown on\015\012 it on and off.

Hope this works.
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist


First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera

Canon A75 no images on LCD when shooting


Possibly the same problem I just had with my A75 (and shared with another post here).Below\015\012 the LCD are two buttons (versus four on the A70). The button\015\012 on the left is the Print/Share button, w ... Canon PowerShot A75 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

In shooting mode lcd displays no image. Happened


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

We have a PowerShot A75 Canon digital camera that will not focus. We can view pics from the flash card, zoom in the shooting mode, but LCD monitor is blurry and out of focus.


... Canon Digital Cameras

I have a Canon Power Shot A75 3.2 mega pixels. LCD Monitor does not work. Screen shows current settings. When trying to take photo's, flash and all indicator lights work. Camera does not record image on CF card.


... Digital Cameras

Have canon rebel xti digital 400d--how do i see live image prior to shooting on lcd monitor


This Canon model 400D or XTi does not have Live view capability in the LCD screen, so you cannot do it.\015\012\015\012You have to use the view finder to select the image that you want to capture with it. \015\012\015\012If yo ... Canon EOS 400D / Rebel XTi Digital Camera

No image display on the LCD in record mode - Canon PowerShot A75 Digital Camera


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

Canon 40D i do not know how to turn on my lcd screen so i can see through it while shooting my image, is it possible?


Hi,Prepare to Live view shooting:1. Set the lens focus mode (on the side of the lens) switch to <MF>2. Set the shooting mode to a Creative Zone mode3. In menu under the settings tab, select Live View function settings an ... Canon EOS 40D Digital Camera

Canon A60 I cannot for the life of me get an image on my LCD, whether I'm shooting or trying to replay. Can you please advise what to do?


First check the DISP button to see if you accidentally hit it. If that's not the problem, take a picture with the camera and download it to your PC. If the picture is also black, then \015\012the problem is probably a defective CCD imager. Don't fr ... Canon PowerShot A60 Digital Camera

Rotating the Canon PowerShot S100 Digital Camera to shoot a vertical image the lcd screen is dark


... Canon PowerShot S100 Digital Camera

Canon eos digital canon rebel xti - LCD won't work when shooting


Here is the Link to the manual If your eye nears the vewfinderthe lcd is automatically shut off this setting can be disabled p101 ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Canon eos digital canon rebel xti - LCD won't work when shooting


Most DSLR cameras (like your Canon) don't have a live view - in other words, you can't "see" the image before you capture it. You must use the viewfinder. ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

Flickering image on LCD lens of my Canon S410


By the sounds of it you have a bad chip on your camera system board. If the image records okay and displays okay after the image is recorded. Other than having your camera repaired you may have to use your camera as is. ... Canon PowerShot S410 / IXUS 430 Digital Camera

Canon A75 No startup sound & display on LCD, rest of things works fine


Think it might be your batteries. 700mah batteries are pretty weak by today's standards (most are at least 2,500 mah these days). I'm guessing your batteries are several years old? If so, they're really only meant to have a usable shelf life of a ... Canon PowerShot A75 Digital Camera

Canon EOS 450D Can only get the Shooting Setting Screen no image


In picture taking mode, press the "set" button for "live view". ... Canon EOS 450D Digital Camera

Canon A430, no display at LCD & black image only


... Digital Cameras

My Canon D50 is used only for astro imaging.The camera is not modified.My problem is when I shoot at ISO 3200 for faint galaxies,I get a huge amount of grainness..My friend has a Canon D40 and does not have this problem when shooting ISO 3200.The grainy background is so intense that it makes post processing of any quality impossible. Is there such a thing as a suggested setting for the Canon D50 that shows exactly what are the proper setting for the Canon D50 to get high quality images? I real


You could experiment with setting the ISO to 1600 or 800 and use corresponding longer shutter speeds. ... Canon EOS 50D 15.1MP Digital SLR Camera Digital Camera with EF-S 18-200mm f/3.5-5.6 IS Standard Zoom Lens

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.


Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

Was shooting full length portraits and my Canon D40 seemed to randomly auto focus on various parts of the image...I would like the entire image in focus...do you think I have a setting wrong .. I am shooting on auto ...so I cant understand why only parts of the image are in focus. Please advise !


Hi Judee,It is about adjusting the settings.Click on the link below and watch the video to know more detailed information about your CameraClick here - > ... Canon EOS 40D Digital Camera

Canon powershot S400 LCD screen image jumbled


This sounds like it might be a defective CCD imager. This will get worse with time, and the pictures may be jumbled next. Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

Canon Powershot A75 blurred LCD display


It sounds like the focus element in your lens is not functioning properly. Does the lens retract completely when you turn off the camera?\015\012\015\012When you push the button does the camera attempt to focus the image? If you do not see any change ... Canon PowerShot A75 Digital Camera

It seems to me that Nikon Point & Shoot cameras, or at least the last 2 that I have bought, have a usable life span of approx 4 or so years before the LCD's decide not to work in turn, makes the camera non usable. I have a 5700, 3.5 years old before it stopped working & a S4, which the LCD also quit working and it is 4 years old, I think my next point & shoot will be a Canon to go along with it's big brother that I bought this year, 50D Does anyone have a solution to this Nikon problem? Stan Wil


No solution here. If you want a quality Nikon, you need to spend thousands for their professional DSLRs. Take care of your Canon and you should be very happy with it. ... Nikon Coolpix S4 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2681 seconds