Having problems with your Canon PowerShot A75 Digital Camera ?

In shooting mode LCD displays No image

\015 PC1202\015

Answers :

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
\015\012 
\015\012http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
\015\012 
\015\012http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
\015\012
\015\012Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

No image The LCD screen flickers, nothing is visible, no shooting of image. However, on shutter click in Auto mode the flash operates but does not record any image. In view mode, the already recorded images are displayed.


No image in shooting mode on Canon S500. Flash operates and shutter clicks. Whats wrong? ... Canon PowerShot S500 IXUS 500 Digital Camera

In shooting mode lcd displays no image. Happened


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

Lcd does not show image when camera is in shooting mode, but does show image when displaying the storage card and menu screens


HI,\015\012\015\012THis is the problem with the CCD device,\015\012\015\012Your CCD is worn and you need to replace your CCD..\015\012\015\012Please rate this solution\015\012RNJ VINODKUMAR ... Canon PowerShot S2 IS Digital Camera

Black display when placed in shooting mode, display is black. and when i take pictures, the recorded image is also black. but in playback mode, i can see the previous recorded images, and it's okay. but the recently recorded images taken when that 'black display problem' occur, the image is just really black. what could be the problem?


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A80 Digital Camera

In shooting mode LCD displays No image


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A75 Digital Camera

I have 2 Sony cameras with problems..one is a DSC-T1..there is no picture when in the camera mode..will display pictures made earlier..lcd is blank in camera mode. The other camera is DSC-F717..Camera has hardly been used..in camera mode the lcd only shows a smeared image..the image is not recgonizable. Strange conicidence, but both failed nerly at the same time.


Hi kd4kdp,\015\012Both of your camera have bad CCD Imagers and must be replaced. Good news for you is that Sony will replaced these parts free of cost. Check more details on following Sony web link. Have nice day.\015\0121= ... Digital Cameras

LCD screen turns purple in shooting mode. Photos can be taken. Most are Ok, some slightly out of focus or faded coloration. If switched to play back mode and then back top shooting mode, display is Ok for a short time then degrades from top center in a V shape to a purple line display.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot S410 / IXUS 430 Digital Camera

I HAVE A GR2 DIGITAL CAMERA. I usually shoot in manual mode and and set white balance manually using a digital callabration target. Yesterday afternoon, after shooting most of theday without problems, my images started appearing completely washed out with an orange cast. This cast also was all over my calibration target image. The image was unclear with stripes running horizontally across my display. This problem is present in all modes. Itried everything I could think of to resolve the matter


I doubt that formatting the card will do anything but, if you choose to do that, download any pics first since formatting will completely erase the card. Have you tried going back to "Auto WB" to see if your camera works properly that way? How about ... Ricoh GR Digital Camera

Help No image in the viewfinder or on the lcd screen when in shooting mode. Have amber light rather than green. In playback mode images appear on lcd screen. Was working fine the last time I used it and have changed the batteries to newly charged. Have also reset to default settings.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S1 IS Digital Camera

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's


The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera

I have a Sony DSC-F88 5.1MP camera... When you switch it on to any of the program modes - image dispalyed on LCD and photographed is distorted. Image is skewed with the edges of the image flaring with three colours to the edge. A kind of focus shift..low resolution image - sort of semi solarised picture. Any previous picture taken displays normal on the LCD... I have tried other memory sticks.. no change..


Your DSC-F88 has problem with CCD Imager and needs to be replaced. Good news is Sony will replace it free of cost. Click Sony Official ... Digital Cameras

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

Both my lcd and Viewfinder appear black (no image) in in shooting mode. I am able to view pictures on both the lcd and Viewfinder when I am in playback mode. i have a Cannon Powershot S3 is. Any suggestions?


I have this EXACT problem and notified Canon Customer Care via email today as I have found around the internet that this camera and it's predecessors had the same problem as do other A models. I got a canned answer about how they know of NO issues w ... Canon PowerShot S3 IS Digital Camera

I have a power Shot A70 camera. The lcd monitor works in reviewing pictures already shot but does not work in the shooting picture mode. I can get the settings and all that in the shoot mode but no image


See this link. Instructions for contacting Canon are for US residen ... Canon Digital Cameras

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem


Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

S5000 - camera does not display images in 'review' mode - still stays in photo shoot mode


Defective ccd imager!! company will replace this ccd imager free of charge. Year 2002 up to 2005 released unit has a factry defect ccd imager. the company recalled these unit and replaced with a stronger version of ccd imager( they are still doing it ... Fuji FinePix S5000 Digital Camera

In shooting mode, lcd is blank, images are blank


I found another user's suggestion and followed it- slapped my camera on myopen palm a couple of times-and it fixed the problem! Needless to say that I will not be buying a sony camera ever again! ... Sony Cyber-shot DSC-W80 Digital Camera

Lcd screen is not displaying images in camera mode....


Hi,Its known problem of bad ccd imager in your Sony DSC-T3 camera and ccd imager will be replaced.Sony will repair it free of cost, click ... Sony Cyber-Shot DSC-T3 Digital Camera

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist


First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera

When I turn the camera on, the image that I am shooting does not show on the LCD monitor. When I switch the camera mode to view images I have taken previously, they show up but the new images are not showing (they are completely black) Can you help?


There are many point you may want to look at.\015\012\015\012first, if the LCD does not display the picture you just capture, there is a possibility that the digital module of the device is broken and that it does not show or save the pic ... Digital Cameras

Inverted image When powering on my Konica Dimage E50 the LCD image is reversed and inverted and all the icons around the screen are upside down and reversed, in the opposite corner to where they should be. When trying to shoot the image is displayed upside down, when viewing pictures store on the card, they are also upside down. Hoping you can assist or is it too late?


No solution I know and I have the same problem!!! Did you find a solution yet??? ... Konica Minolta DiMAGE E50 Digital Camera

Blank LCD Screen when in shoot mode


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1506 seconds